Abstract:Carbon capture and storage (CCS) has been identified as transformative technologies to achieve maximum reductions in CO2 emissions specified under the Kyoto Protocol. Historically, CO2 was first stored in reservoir indirectly back in 1970s during Enhanced Oil Recovery (EOR) process. Subsequently in 1996, the Sleipner CO2 storage project was officially implemented in Norway providing reference to future CO2 storage projects. As one of the main players in the oil and gas industries, PETRONAS has been proactive in finding an end-to-end technology development for CCS. The S field, a non-associated gas field, located 250km Offshore Sarawak Malaysia has recently been identified as a potential pilot for hydrocarbon production and CO2 storage as well as for surface and subsurface technologies maturation. The S field, a carbonate builds up platform is considered heterogeneous type of reservoir with porosity ranging from 15% to 40% and permeability ranging from 10md to 1300md. The S field contains 70mol% CO2 gas contents/30mol% hydrocarbons with some amount of impurities, N2, H2S and Hg. As a baseline development strategy to support this technology project, pure CO2 injection was considered, taking into account the separation technology efficiency to separate CO2 from other contaminants back into the same reservoir aquifer. However, due to some limitation on the surface technologies and economy limits, traces of impurities might be present in the system. There is a possibility of CO2 being co-injected with impurities, for instance H2S. The effect of the contaminant in the injected CO2 stream needs to be accessed to ensure the success of the CCS operation. Changes in base CO2 solubility may ultimately affect storage integrity and capacity. Since abundant solubility data of CO2 in water or brine are available in the literature and less data for this ternary system indicates that the understanding in quantifying the impact of this H2S impurity on CO2 solubility is essential. In this communication, extensive laboratory experiments on vapour-liquid equilibrium on the binary CO2-H2O (for experimental method validation) and ternary systems, CO2-H2S-H2O and CO2-H2S-Brine (0.35M) have been conducted at 423.15K, under pressure range of 1-35 MPa. The experimental method used in this work is the static-analytic type, taking advantage of two magnetic capillary samplers (Rolsi®, Armine’s Patent) developed in the CTP laboratory. This method allows the sampling of the mixture in both vapour and liquid phases and their analysis by Gas Chromatograph (GC). Thermodynamic modelling using the simplified Cubic Plus Association (sCPA) equation of state was able to satisfactorily describe the phase behaviour of the ternary systems. The impact of this H2S on CO2 injection for CCS has been further evaluated using numerical reservoir simulation. Existing reservoir dynamic modelling has been improved by incorporating the new experimental data. Simulations results were analysed based on the volume of CO2 dissolved in water and the total volume of CO2 gas injected. It shows that the introduction of H2S in injected CO2 promote a reduction of CO2 dissolved in water by 15%, however it eventually offers a similar amount of CO2 storage over long period of time.

Effect of H 2 S content on relative permeability and capillary pressure characteristics of acid gas/brine/rock systems: A review

Fine quantitative characterization of high-H 2 S gas reservoirs under the influence of liquid sulfur deposition and adsorption

Predicting possible effects of H2S impurity on CO2 transportation and geological storage

Convective Dissolution Analysis of Long-term Storage of Acid Gas in Saline Aquifers

Thermodynamic Properties of a Gas–Liquid–Solid System during the CO2 Geological Storage and Utilization Process: A Review

The Fate of CO2 Derived from Thermochemical Sulfate Reduction (TSR) and Effect of TSR on Carbonate Porosity and Permeability, Sichuan Basin, China

Fine Quantitative Characterization of High-H2s Gas Reservoirs under the Influence of Liquid Sulfur Deposition and Adsorption

Experimental Determination of Wettability and Heterogeneity Effect on CO2 Distribution in Porous Media

Effect of thermochemical sulfate reduction upon carbonate gas reservoir: An example from the northeast Sichuan Basin

Experimental evaluation of rock mineralogy on hydrogen-wettability: Implications for hydrogen geo-storage

Cushion gas effects on clay-hydrogen-brine wettability at conditions relevant to underground gas storage

Interfacial Tension and Contact Angle Measurements for the Evaluation of CO2‐brine Two‐phase Flow Characteristics in Porous Media

Assessment of wettability and rock-fluid interfacial tension of caprock: Implications for hydrogen and carbon dioxide geo-storage

Influence mechanism of brine-gas two-phase flow on sealing property of anisotropic caprock for hydrogen and carbon energy underground storage

Impact of H2S in Predicting the Storage Efficiency of CO2 Injection in a High Pressure High Temperature (HPHT) Carbonate Aquifer - A Case Study in a Sarawak Offshore High CO2 Gas Field, Malaysia

Hydrogen wettability in carbonate reservoirs: Implication for underground hydrogen storage from geochemical perspective

Effect of Capillary Pressure and Salinity on CO 2 Solubility in Brine Aquifers

A Review of Coupled Geochemical–Geomechanical Impacts in Subsurface CO2, H2, and Air Storage Systems

Gas transport model in pore heterogeneous bedded salt rock: Implications for tightness evaluation of salt cavern gas storage

Effects of Carbonic Acid-Rock Interactions on CO2/Brine Multiphase Flow Properties in the Upper Minnelusa Sandstones

Pore-scale phenomena in carbon geological storage (Saline aquifers—Mineralization—Depleted oil reservoirs)