Abstract:The decentralized production associated with material extrusion additive manufacture (MEX) has been proposed as an ideal path to increase the circularity of plastics through direct recycling. Although multiple studies have reported on the 3D printing of various recycled plastics, variability in recycled materials, in particular post-consumer waste, challenges the direct extension of these results into production through MEX. Here, we demonstrate filament fabrication and printing of post-consumer polypropylene (PP), where the PP is sourced from clear, cold drink cups from three large international food service and beverage retail chains to provide well defined plastic waste that is perfectly sorted for recycling. These sources for the recycled PP were selected due to their ready availability to enable the results to be directly applied for hobbyist printing, blow molded products to provide good mechanical performance, and the clarity of the PP which suggests formulation design to minimize the PP crystal size. Despite the similarities in the end use product and their physical appearance, the source for the PP impacted the mechanical properties and the visual appearance of the printed objects. These differences can be directly traced to the rheological properties and oxidative stability of the PP at conditions relevant with the print process. These results clearly illustrate differences in initial formulation design and branding details, even when the product is for the same application, impacts the performance of recycled plastics in AM. The high viscosity associated with the PP from blow molding leads to requirements for higher extrusion temperatures for printing. The combination of high temperature and shear during extrusion process of 3D printing degrades the recycled PP. For circularity with MEX with recycled PP, one needs to consider the evolution in the properties of the polymer. Rheological details of recycled plastics are critical to selection of processing conditions and performance of MEX parts. Reporting of rheological data of recycled plastics and after printing is critical to enable translation towards circular 3D printing of recycled plastics.

Feasibility study on the production of low melt flow rate recycled polypropylene from postconsumer waste

Enhancing the Quality of Polypropylene Recyclates: Predictive Modelling of the Melt Flow Rate and Shear Viscosity

Polypropylene Post-Consumer Recyclate Compounds for Thermoforming Packaging Applications

Analysis of Selected Properties of Polymer Mixtures Derived from Virgin and Re-Granulated PP with Glass Fibers

Development of Technologies for Processing Polypropylene Foil Waste and Their Use in the Production of Finished Products

Assessment of property profile of post‐industrial polypropylene recyclates through a multivariable recycling process

Towards effective recycling routes for polypropylene: influence of a repair additive on flow characteristics and processability

Morphological analysis of mechanically recycled blends of high density polyethylene and polypropylene with strong difference in melt flow index

Rheological and Functional Properties of Mechanically Recycled Post-Consumer Rigid Polyethylene Packaging Waste

Impacts of washing and deodorization treatment on packaging-sourced post-consumer polypropylene

A Promising Recycling Strategy via Processing Polypropylene/Recycled Poly(ethylene terephthalate): Reactive Extrusion Using Dual Compatibilizers

Subtle Differences in Recycled Polypropylene from Rheology to Additives Impacts Ease of Circularity in Materials Extrusion Additive Manufacture

Analysis of Mechanical and Thermal Properties of Polymer Materials Derived from Recycled Overprinted Metallized PP Films

Short- and Long-Term Performance of Pipe Compounds Containing Polyethylene Post-Consumer Recyclates from Packaging Waste

Effects of Contamination with Selected Polymers on the Mechanical Properties of Post-Industrial Recycled Polypropylene

Mechanical and crystallization properties of hot runner injection molded virgin and recycled polypropylene

Compatibility study of recycled Polypropylene (PP)/Poly(ethylene terephthalate) (PET) blends nanocomposites with PP‐g‐MAH: Modeling of twin screw extrusion

High-Value Recycling of Isotactic Polypropylene-Based Plastic Waste as a Crystallization Promoter for High-Performance Polypropylene Random Copolymers

Rheological Insights into the Degradation Behavior of PP/HDPE Blends

Study on Recycling of Waste Glass Fiber Reinforced Polypropylene Composites: Examination of Mechanical and Thermal Properties

Recycled polypropylene blends as novel 3D printing materials