Abstract:Currently, several kinds of solar cells are developed and among them, organic-inorganic perovskite solar cells (PSCs) have received substantial interest because they have shown panchromatic light absorption capacities using low amounts of earth abundant materials, low exciton recombination rate, high carrier mobility and high solar to electrical power conversion efficiencies (PCEs) which can exceed 22%. In most PSCs, methylammonium lead iodide (CH3NH3PbI3 or MAPbI3) semiconductor perovskite is sandwiched between an electron transport material (ETM, n-type material) and a hole transport material (HTM, a p-type material). Two kinds of n-i-p and p-i-n configurations are fabricated which depends on the relative positions of the ETM and HTM layers in the device. The ETM in the n-i-p solar cell is usually a planar or mesoporous TiO2 thin film in which the perovskite solution is infiltrated. A disadvantage of the n-i-p cell is using very expensive HTM, 2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenyl-amine)9,9′-spirobifluorene (spiro-OMeTAD). Although numerous HTMs have been introduced, spiro-OMeTAD is the most efficient HTM. Nonetheless, spiro-OMeTAD must be ultra-pure to produce high performance and this increases its price which is not cost-effective from economical viewpoint. Additionally, its pristine form performs badly and doping is necessary to improve its hole-mobility and conductivity. Also, the common dopants including 4-tert-butylpyridine, lithium salts and cobalt complex are corrosive and very hygroscopic which result in the device instability. In the p-i-n cells, poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is extensively utilized as the HTM which is UV-unstable and hydrophilic that makes the device unstable. Furthermore, it is only deposited through solution coating process and shows acidic property that reacts with its underlying transparent conductive oxide. Thus, many attempts have been done to substitute the spiro-OMeTAD with other materials to find HTMs suitable for commercialization of PSCs. In this review, recent researches performed to improve the PCEs of PSCs using different classes of HTMs are studied.

The Renaissance of Poly(3‐hexylthiophene) as a Promising Hole‐Transporting Material Toward Efficient and Stable Perovskite Solar Cells

Recent Advances in Poly(3‐hexylthiophene) and Its Applications in Perovskite Solar Cells

Recent progress in development of diverse kinds of hole transport materials for the perovskite solar cells: A review

A brief review of hole transporting materials commonly used in perovskite solar cells

Hole-Transporting Materials for Printable Perovskite Solar Cells

Review of Inorganic Hole Transport Materials for Perovskite Solar Cells

Pyrene-Cored Hole-Transporting Materials for Efficient and Stable Perovskite Solar Cells

Highly Efficient and Stable Perovskite Solar Cells Via a Multifunctional Hole Transporting Material

Recent Advances in Nanostructured Inorganic Hole-Transporting Materials for Perovskite Solar Cells

What Should be Considered While Designing Hole-Transporting Material for Perovskite Solar Cells? A Special Attention to Thiophene-Based Hole-Transporting Materials

Advances in hole transport materials engineering for stable and efficient perovskite solar cells

Enhancing perovskite solar cell performance: The role of polymer-assisted hole transport layers in hot carrier dynamics

2,3-Diphenylthieno[3,4- b ]pyrazines as Hole-Transporting Materials for Stable, High-Performance Perovskite Solar Cells

PTAA as Efficient Hole Transport Materials in Perovskite Solar Cells: A Review

Perovskite Solar Cells: Challenges Facing Polymeric Hole Selective Materials in p–i–n Configuration

Tailored Polymeric Hole‐Transporting Materials Inducing High‐Quality Crystallization of Perovskite for Efficient Inverted Photovoltaic Devices

Passivation functionalized phenothiazine-based hole transport material for highly efficient perovskite solar cell with efficiency exceeding 22%

Simultaneously Enhancing the Efficiency and Stability of Perovskite Solar Cells by Using P3HT/PEDOT:PSS as a Double Hole Transport Layer

A Review of Inorganic Hole Transport Materials for Perovskite Solar Cells

Polymeric Charge‐Transporting Materials for Inverted Perovskite Solar Cells

The evolution of triphenylamine hole transport materials for efficient perovskite solar cells