Abstract:In the last three decades, p-type (hole-transporting) organic and polymeric semiconductors have achieved great success in terms of materials diversity and device performance, while the development of n-type (electron-transporting) analogues greatly lags behind, which is limited by the scarcity of highly electron-deficient building blocks with compact geometry and good solubility. However, such n-type semiconductors are essential due to the existence of the p–n junction and a complementary metal oxide semiconductor (CMOS)-like circuit in organic electronic devices. Among various electron-deficient building blocks, imide-functionalized arenes, such as naphthalene diimide (NDI) and perylene diimide (PDI), have been proven to be the most promising ones for developing n-type organic and polymeric semiconductors. Nevertheless, phenyl-based NDI and PDI lead to sizable steric hindrance with neighboring (hetero)arenes and a high degree of backbone distortion in the resultant semiconductors, which greatly limits their microstructural ordering and charge transport. To attenuate the steric hindrance associated with NDI and PDI, a novel imide-functionalized heteroarene, bithiophene imide (BTI), was designed; however, the BTI-based semiconductors suffer from high-lying frontier molecular orbital (FMO) energy levels as a result of their electron-rich thiophene framework and monoimide group, which is detrimental to n-type performance.In this Account, we review a series of BTI derivatives developed via various strategies, including ring fusion, thiazole substitution, fluorination, cyanation, and chalcogen substitution, and elaborate the synthesis routes designed to overcome the synthesis challenges due to their high electron deficiency. After structural optimization, these BTI derivatives can not only retain the advantages of good solubility, a planar backbone, and small steric hindrance inherited from BTI but also have greatly suppressed FMO levels. These novel building blocks enable the construction of a great number of n-type organic and polymeric semiconductors, particularly acceptor–acceptor (or all-acceptor)-type polymers, with remarkable performance in various devices, including electron mobility (μe) of 3.71 cm2 V–1 s–1 in organic thin-film transistors (OTFTs), a power conversion efficiency (PCE) of 15.2% in all-polymer solar cells (all-PSCs), a PCE of 20.8% in inverted perovskite solar cells (PVSCs), electrical conductivity (σ) of 0.34 S cm–1 and a power factor (PF) of 1.52 μW m–1 K–2 in self-doped diradicals, and σ of 23.3 S cm–1 and a PF of ∼10 μW m–1 K–2 in molecularly n-doped polymers, all of which are among the best values in each type of device. The structure–property–device performance correlations of these n-type semiconductors are elucidated. The design strategy and synthesis of these novel BTI derivatives provide important information for developing highly electron-deficient building blocks with optimized physicochemical properties. Finally, we offer our insights into the further development of BTI derivatives and semiconductors built from them.This article has not yet been cited by other publications.

Dithiene-fused quinoxalineimide-based all-acceptor polymers for n-type organic semiconductors

N-Type Semiconducting Polymers Based on an Bithiophene Imide-Bridged Isoindigo for Organic Field-Effect Transistors

Rational Design of a Narrow-Bandgap Conjugated Polymer Using the Quinoidal Thieno[3,2-b]thiophene-Based Building Block for Organic Field-Effect Transistor Applications

Thiadiazoloquinoxaline-Fused Acenaphthenequinone imide: A Highly Electron-Withdrawing Acceptor for Ambipolar Semiconducting Polymers with Strong Near-Infrared Absorption

Aldol condensation-enabled acceptor-acceptor type bithiophene imide polymer semiconductors for n‐Type field-effect transistors

n-Type Organic and Polymeric Semiconductors Based on Bithiophene Imide Derivatives

n-Type Polymer Semiconductors Based on Dithienylpyrazinediimide

Fused Bithiophene Imide Oligomer and Diketopyrrolopyrrole Copolymers for N-Type Thin-Film Transistors.

Thienoquinolinone-based acceptor-π-acceptor-type building block for polymer donors in organic solar cells

A Thieno[3,2‐c]Isoquinolin‐5(4H)‐One Building Block for Efficient Thick‐Film Solar Cells

An Imide-Based Pentacyclic Building Block for N-Type Organic Semiconductors

Isoquinoline-1,3-dione-derived conjugated polymers for field-effect transistors: Synthesis, properties, and the effect of inner aromatic bridges

IDTI based copolymers for p-type organic field-effect transistors

Unravelling the Role of Electron Acceptors for the Universal Enhancement of Charge Transport in Quinoid‐Donor‐Acceptor Polymers for High‐Performance Transistors

Novel Donor–acceptor Type Conjugated Polymers Based on Quinoxalino[6,5-F]quinoxaline for Photovoltaic Applications

A New Dibenzoquinoxalineimide-Based Wide-Bandgap Polymer Donor for Polymer Solar Cells

Synthesis and Characterization of Conjugated Polymers Based on Thieno[3,4‐b]thiophene Quinoidal Unit

Cyano-Functionalized Bithiophene Imide-Based n-Type Polymer Semiconductors: Synthesis, Structure–Property Correlations, and Thermoelectric Performance

Controlling Molecular Assembly and Charge Transport of N-Type Organic Semiconductors with Sterically Demanding Substituents

N -Type Semiconductive Polymers Based on Pyrene-1,5,6,10-Tetracarboxyl Diimide

Rational Design Dithieno[3,2‐f:2′,3′‐h]quinoxaline‐Based Polymers with Optimized Molecular Configuration and Charge Transfer for High‐Performance All‐Polymer Solar Cells