Abstract:The decentralized production associated with material extrusion additive manufacture (MEX) has been proposed as an ideal path to increase the circularity of plastics through direct recycling. Although multiple studies have reported on the 3D printing of various recycled plastics, variability in recycled materials, in particular post-consumer waste, challenges the direct extension of these results into production through MEX. Here, we demonstrate filament fabrication and printing of post-consumer polypropylene (PP), where the PP is sourced from clear, cold drink cups from three large international food service and beverage retail chains to provide well defined plastic waste that is perfectly sorted for recycling. These sources for the recycled PP were selected due to their ready availability to enable the results to be directly applied for hobbyist printing, blow molded products to provide good mechanical performance, and the clarity of the PP which suggests formulation design to minimize the PP crystal size. Despite the similarities in the end use product and their physical appearance, the source for the PP impacted the mechanical properties and the visual appearance of the printed objects. These differences can be directly traced to the rheological properties and oxidative stability of the PP at conditions relevant with the print process. These results clearly illustrate differences in initial formulation design and branding details, even when the product is for the same application, impacts the performance of recycled plastics in AM. The high viscosity associated with the PP from blow molding leads to requirements for higher extrusion temperatures for printing. The combination of high temperature and shear during extrusion process of 3D printing degrades the recycled PP. For circularity with MEX with recycled PP, one needs to consider the evolution in the properties of the polymer. Rheological details of recycled plastics are critical to selection of processing conditions and performance of MEX parts. Reporting of rheological data of recycled plastics and after printing is critical to enable translation towards circular 3D printing of recycled plastics.

Machine learning model and input batch management tool for the composition of new recycled polypropylene plastic material with reduced variability in target properties

Melt index prediction by adaptively aggregated RBF neural networks trained with novel ACO algorithm

Enhancing the Quality of Polypropylene Recyclates: Predictive Modelling of the Melt Flow Rate and Shear Viscosity

Mechanical Recycling of Post-Industrial PC/ABS Blends from the Automotive Sector by Mixture Design

Dimensional Stability and Process Capability of an Industrial Component Injected with Recycled Polypropylene

In‐mold rheology and automated process control for injection molding of recycled polypropylene

Environmental sustainability: A machine learning approach for cost analysis in plastic recycling classification

Applied machine learning for prediction of waste plastic pyrolysis towards valuable fuel and chemicals production

Towards effective recycling routes for polypropylene: influence of a repair additive on flow characteristics and processability

A novel approach for accurate determination of polyethylene and polypropylene content in polyolefin blends and recyclates by cross-fractionation chromatography

Accurate determination of polyethylene (PE) and polypropylene (PP) content in polyolefin blends using machine learning-assisted differential scanning calorimetry (DSC) analysis

Material flow analysis and recycling performance of an improved mechanical recycling process for post-consumer flexible plastics

Subtle Differences in Recycled Polypropylene from Rheology to Additives Impacts Ease of Circularity in Materials Extrusion Additive Manufacture

Compatibility study of recycled Polypropylene (PP)/Poly(ethylene terephthalate) (PET) blends nanocomposites with PP‐g‐MAH: Modeling of twin screw extrusion

Upcycling of Poly(Lactic Acid) by Reactive Extrusion with Recycled Polycarbonate: Morphological and Mechanical Properties of Blends

Machine learning directed discrimination of virgin and recycled poly(ethylene terephthalate) based on non-targeted analysis of volatile organic compounds

Effect of oligomeric lactic acid plasticizer on the mechanical recycling of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Morphological analysis of mechanically recycled blends of high density polyethylene and polypropylene with strong difference in melt flow index

Assessment of property profile of post‐industrial polypropylene recyclates through a multivariable recycling process

Mechanical and crystallization properties of hot runner injection molded virgin and recycled polypropylene

Machine Learning in the Analysis of the Mechanical Shredding Process of Polymer Recyclates