EVALUASI JADWAL PRODUKSI JOBSHOP UNTUK MEMINIMALKAN MAKESPAN MENGGUNAKAN MIXED INTEGER LINEAR PROGRAMMING

Ratih Ardia Sari,Jeffan Darma Yuvandhi,Ceria Farela Mada Tantrika

2018-01-17

Abstract:Jika membutuhkan abstrak atau isi jurnal silahkan menghubungi author melalui email jeffandy24@gmail.com, ceria_fmt@ub.ac.id, rath.ardia@ub.ac.id.

Mathematics

What problem does this paper attempt to address?

OPTIMALISASI PENDISTRIBUSIAN BARANG DENGAN MODEL MIXED INTEGER LINEAR PROGRAMMING PADA PT. LOGISTIK EKSPRESINDO UTAMA

Zaharuddin,Rafika Apriani Pratiwi,Uun Novalia Harahap

DOI: https://doi.org/10.51804/jiso.v7i1.64-73

2024-06-28

Abstract:PT. LogistikEkspresindoUtama is a service company that has integration services ranging from land, sea and air Freight Forwarding services, PPJK (Customs Service Management Company), and Transportation Management for Projects, which is supported by a complete selection of land, sea and air transportation fleets specializing in handling cargo that requires special handling both at home and abroad. The company's subjective judgment alone has been used to choose the current route, and the shipping cost has not been considered. As a result, a unique approach is required to solve this issue. Consequently, this research aims to identify a cost-effective route and optimize distribution costs. This study uses the Integer Linear Programming method to optimize the delivery of goods and minimize transportation costs. Based on the data processing results using the Integer Linear Programming method, it can minimize the distance of 604 km or 13.04%; the minimum travel time is 14.9 hours or 12.88%; the minimum total distribution cost is Rp 1,154,650 or 16.47%. PT. Logistik Ekspresindo Utama merupakan salah satu Perusahaan Jasa yang memiliki layanan integrasi mulai dari jasa Freight Forwardingdarat, laut maupun udara, PPJK (Perusahaan Pengurusan Jasa Kepabeanan), Manajemen Transportasi untuk Project, yang didukung oleh pilihan lengkap armada transportasi darat, laut dan udara spesialisasi dalam menangani kargo yang membutuhkan penanganan khusus baik di dalam maupun luar negeri. Penilaian subjektif perusahaan saja yang digunakan untuk memilih rute saat ini, dan biaya pengiriman belum diperhitungkan. Akibatnya, untuk menyelesaikan masalah ini, diperlukan pendekatan yang unik. Oleh karena itu, tujuan penelitian ini adalah untuk mengidentifikasi rute yang hemat biaya dan mengoptimalkan biaya distribusi. Penelitian ini menggunakan metode Integer Linear Programming untuk mengoptimalkan pengiriman barang dan meminimalkan biaya transportasi. Berdasarkan hasil pengolahan data menggunakan metode Integer Linear Programming dapat meminimumkan jarak tempuh sebesar 604 km atau 13,04%, minimum waktu tempuh sebesar 14,9 jam atau 12,88%, minimum total biaya distribusi sebesar Rp. 1.154.650 atau 16,47%.
Meningkatkan UMKM Jus Buah Bu Ida dengan Mengoptimumkan Penjualan Menggunakan Metode Simpleks dalam Linear Programming

Ria Agustina,Ruth Sanaya Nainggolan,Suvriadi Panggabean

DOI: https://doi.org/10.55606/jurrimipa.v3i1.2223

2023-12-09

Abstract:household industry or usually known quantity when UMKM is an arising chance. Rephrase. This happens because there are very few job break. However, some UMKMs still have adversity determining the optimal production abundance broad- based on accessible expedient, so these troop cannot amplify. One of them is Bu Ida fruit juice, which consistently produces fruit juice according to crowd-pleasing orders of average consumer credit. admittedly utilize capital and basic materials enough, Ms. Ida's business is growing day by day. From this research, problems were distinguish and answer live needed, comprehend the employment of linear programming to determine the sales abundance that absence to be optimized to attain maximum earnings from juice sales Ida's fruit. There are 6 (six) juices and 6 (six) ingredients. In this study, a simple method linear programming algorithm is applied to obtain an optimization model to maximize the juice production quantity and obtain optimal profits. The POM-QM Windows application provides fast, accurate and precise calculation results.
Optimization of production planning using integer linear programming method (case study of bakpia menik)

Marni Astuti,Ardian Prabowo,Esa Rengganis Sullyarta,Yasrin Zabidi

DOI: https://doi.org/10.28989/compiler.v12i2.1919

2023-11-30

Compiler

Abstract:Bakpia Menik is a Small and Medium Enterprise (UKM) which operates in the field of bakpia production. Bakpia is one of the local cakes which is the main souvenir from Yogyakarta, so there is a big potential for increasing production. However, SMEs still lack production management planning to optimize resource use. So it is difficult to capture this big opportunity to maximize profits for SMEs. Seeing these problems, this research designed an integer linear programming mathematical model to optimize profits by using existing resources. Integer Linear Programming (ILP) is a mathematical model for maximizing profit and minimizing cost based on a mathematical model involving integer variables represented in a linear relationship. This research produces an integer linear programming model that presents the variables, resources, and constraints of Bakpia Menik. The model output shows that the optimal production amount by maximizing resource use is 31232 units and the maximum profit is IDR 33,431,750. From the model output, it can also show the advantages and disadvantages of Bakpia resources, so that resource availability planning can be carried out which can minimize holding costs.
ANALISIS PENGENDALIAN BAHAN BAKU JASA MAKLON DENGAN MENGGUNAKAN METODE EOQ (ECONOMIC ORDER QUALITY) BERBASIS BIG DATA LOGISTIK GUNA MEMINIMALISIR BIAYA PRODUKSI PADA PT BARATA INDONESIA (PERSERO)

Dina Eka Shofiana,Dwi Novita Sari

DOI: https://doi.org/10.31334/bijak.v15i2.202

2018-10-12

Majalah Ilmiah Bijak

Abstract:This study aims to determine the control of raw materials by using EOQ (Economic Order Quality) method to minimize production costs in PT Barata Indonesia (Persero). This research uses Adeskriptif with qualitative approach.The results of this study indicate that the control of raw materials using the EOQ (Economic Order Quallity) method can minimize production costs in PT Barata Indonesia (Persero) as follows: Silica Sand raw material can minimize production cost of Rp 16,321,500. Fero Silicon minimize the production cost of Rp 7,520,550,000, the raw material of Fero Mangan Mc can minimize the cost of Rp 2,255,625,000, the raw material of Fero Mangan Hc can minimize the cost of Rp 1.098,600. the raw material of Scrap can minimize the cost of Rp 324,995,000.
The Establishment of Decision Making Support Tool for Inventory Control and Production Planning with Periodic Review System and Linear Programming Approach

Redy Ardiansyah,I Nyoman Pujawan,Niniet Indah Arvitrida

DOI: https://doi.org/10.12962/j23546026.y2020i1.11946

2022-01-04

IPTEK Journal of Proceedings Series

Abstract:PT. Mortars is an instant cement producer with many product variants. Some problems that PT. Mortars encountered are uncertainty of demand, limitation on production capacity, and inventory capacity, which caused product shortages and high inventory costs. The production scheduling process is produced manually so it requires a long time, relying on the ability and experience of the production planner which is vulnerable to mistakes. Therefore, new methods and tools are needed for inventory control and production scheduling to make sure goods are delivered to customer just in time while maintaining operational efficiency. Periodic review system (R,S) and (R, s, S) methods are proposed in this study to improve inventory parameters and reorder systems that have an impact on service levels and inventory costs. The tools are designed using Microsoft Excel software with solver add-ins functions and linear programming approaches to generate optimal production schedule decisions automatically. In order to determine the level of service and inventory costs generated by each method, a simulation is conducted by using the tools that have been made. The simulation of the existing method produces a service level of 98,64% and a total inventory cost of Rp. 1.167.160.494. The periodic review system (R, S) method resulted in increasing service level of 0,96% and lower inventory cost of Rp. 15.130.801 while the periodic review system (R, s, S) method resulted in increasing service level of 1,29% and a lower inventory cost of Rp. 448.653 compared to the existing method. The periodic review system (R, S) method produces the lowest inventory costs while the method (R, s, S) produces the highest service level compared to other methods.
Aplikasi Kalkulator Full Costing UD Roti Bakery dengan Visual Basic 6.0

Novia Fatimah,Wigiyanti Wigiyanti

DOI: https://doi.org/10.34010/aisthebest.v7i2.8384

2023-01-04

is The Best Accounting Information Systems and Information Technology Business Enterprise this is link for OJS us

Abstract:Konsumen selalu tertarik pada produk/jasa berkualitas dengan harga yang kompetitif. Harga kompetitif dapat dicapai dengan menekan biaya produksi. Untuk menekan biaya produksi, perusahaan harus cermat menentukan harga pokok produksi. Salah satu cara menentukannya dengan menggunakan metode full costing, yaitu metode perhitungan harga pokok produksi dengan cara menghitung seluruh biaya tetap dan variabel. UD Roti Bakery yang bergerak dibidang produksi roti manis di Jakarta Selatan, menghitung harga pokok produksi secara manual. Sering terjadi kesalahan pada proses tersebut karena unsur biaya yang akan dihitung tidak sedikit sehingga proses memasukkan datanya dan proses menghitung dapat berulang kembali untuk memastikan kebenaran hasil perhitungan. Hal ini sangat tidak efisien. Dengan tujuan mengefisienkannya, penulis membangun aplikasi sederhana berbasis komputer menggunakan pemrograman Visual Basic 6.0 dan metode Rapid Application Development berdasarkan data laporan keuangan UD Roti Bakery periode Januari 2020. Penelitian ini menggunakan metode kuantitatif dan kualitatif karena data berupa angka-angka dan diperoleh melalui wawancara dan catatan pengamatan langsung dengan pihak perusahaan. Hasil akhir penelitian ini berupa aplikasi komputer siap pakai berbasis desktop bernama Aplikasi Kalkulator Full Costing UD Roti Bakery dengan batasan hanya untuk operator UD Roti Bakery dan tidak dapat memasukkan lebih dari satu tanggal untuk data yang sama. Aplikasi ini berimplikasi memberi warna lain dalam komputerisasi perhitungan harga pokok produksi dengan metode full costing.
Proposed assembly line balancing using mixed integer programming to minimize idle time of union fuselage

Ni Putu Cynthia Sasmita Dewi,Dida Diah Damayanti,Murni Dwi Astuti

DOI: https://doi.org/10.1088/1757-899X/1007/1/012094

2021-01-01

IOP Conference Series: Materials Science and Engineering

Abstract:This study is aimed to help the company doing an assembly line balancing to minimize station time as not to exceed takt time and minimize idle time between workstation, using Mixed Integer Programming (MIP) method with Multi-manned Assembly Line Balancing (MmALBP) approach using two mathematical model, which 1 st model aimed to minimize the cycle time of all workstation, then those cycle time being a parameter in 2 nd Mathematical model to specified the optimal number of workers also balancing workload between operators. Result from this research were able to minimize station time from 218.56 hour to 166.3 hour so it didn't exceed the takt time and also could reduce total idle time until 45% from 905.2 hour in actual condition become 499.49 hour with decreased number of operator from 52 to 22 person, and increase the efficiency of assembly line from 54% in previous to 67% in the proposed line.
Production scheduling by implementing Campbell Dudek Smith (CDS) and Dannenbring methods: A PVC pipe green production case study

R Hanafi,S Mangngenre,S Asmal,I Setiawan,C Gloryantho

DOI: https://doi.org/10.1088/1755-1315/343/1/012007

2019-10-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract Production scheduling in the industrial sector has a crucial role as the optimization of sources. The companies attempt to have an effective and efficient scheduled to increase the productivity with minimum lead time and cost. The objective of this research is to determine the production schedule of the machines at the minimum level in a manufacturing company to obtain the minimum makespan value. The planning with minimum makespan value will implement in the production process. Production scheduling performed by a PVC pipe factory named PT J during the time based on the longest production time. During the production process, ineffective production planning usually occurred, which caused longer lead time to create a massive production. This research aims to provide the optimal solution for appropriate job sequence to obtain the lowest makespan value as a result. In this research, the authors use two comparative methods, namely Campbell Dudek Smith (CDS) method and Dannebring method to determine the optimal job sequence. According to data processing, by implementing those methods, it obtained the makespan results. The makespan value from CDS method is 14,943.51 minutes with the job sequence J1 – J6 – J2 – J7 – J3 – J4 – J5 on the iteration 1, and the job sequence J1 – J6 – J2 – J7 – J4 – J3 – J5 on iteration 2 and 3. By using Dannebring method, the makespan value is 15,152.61 minutes with the work sequence J1 – J6 – J2 – J7 – J4 – J3 – J5. The makespan value from CDS method on the iteration 1 is 14,943.51 minutes. This value is 14.18% less than the company’s method used with 17,412.48 minutes as the makespan value.
Adaptive Production Rescheduling System for Managing Unforeseen Disruptions

Andy J. Figueroa,Raul Poler,Beatriz Andres

DOI: https://doi.org/10.3390/math12223478

IF: 2.4

2024-11-08

Mathematics

Abstract:This work presents a mixed-integer linear programming (MILP) model to solve the production rescheduling problem in a job shop manufacturing system impacted by unexpected events, aiming to minimize production costs and disruptions to the initial schedule. The approach begins by generating an optimal production plan through batch assignments to machines. When unforeseen events, such as machine breakdowns or raw material shortages, occur, a dynamic rescheduling process is triggered, employing an iterative and reactive algorithm to adapt the plan to the real-time conditions on the shop floor. The results demonstrate that this rescheduling method efficiently adjusts to the new conditions while minimizing deviations from the original schedule, achieving solutions within acceptable computational times.

mathematics
Time and cost optimization using scheduling job shop and linear goal programming model

Afina Lina Nurlaili,Biandina Meidyani,R. Sarno

DOI: https://doi.org/10.1109/ICOIACT.2018.8350720

2018-03-06

Abstract:Time and cost optimization is a way to determine the optimal time and cost to use. Usually the faster the time the cost is more. To determine the time of peractivity used schedulling jobshop. The problem is whether the system that companies do so far is the best system or not. Activity issues include how to design some regulatory activities while minimizing total time, and total distribution costs. This problem is encountered in the case of Surabaya Container. In this paper, we discussed how to apply goal programming method to create activity model with company's constraints to obtain more optimal results. By developing a pre-existing activity model and using the help of the LINGO 11.0 program, the determination of the route with the goal programming method can be completed. The results obtained show that activity is formed with time, and the minimum cost. Moreover, in this paper will also compare the scheduling flow shop and job shop. Job shop produces less time than flow shop.

Computer Science,Business,Engineering
Development of Scheduling of Operating Rooms and Allocation of Inpatient Rooms Model by Considering Patient Preferences on Surgeon and Inpatient Room Classes

Febryanti Valentina Sitanggang,Cucuk Nur Rosyidi,Pringgo Widyo Laksono,J. Hariyono,M. Anwar

DOI: https://doi.org/10.1051/e3sconf/202346502019

2023-12-19

E3S Web of Conferences

Abstract:Patient satisfaction on the services provided hospital indicates that hospital quality is improving. Surgery services and inpatient room services are two hospital health services that describe the hospital's quality. This study proposed the development of an operating room scheduling model and inpatient room allocation based on the patient's preference for surgeons and inpatient classes. Operating room scheduling and inpatient room allocation were optimized using Mixed Integer Linear Programming (MILP) and LINGO 18.0 software. The findings showed that the proposed model and algorithm could provide a feasible solution for minimizing hospital operating costs and maximizing patient preference. In order to obtain a satisfactory scheme for patients and hospitals, it was proposed to consider patient preferences in operating scheduling and inpatient room allocation
Energy-Aware Flexible Job Shop Scheduling Using Mixed Integer Programming and Constraint Programming

Andy Ham,Myoung-Ju Park,Kyung Min Kim

DOI: https://doi.org/10.1155/2021/8035806

IF: 1.43

2021-06-30

Mathematical Problems in Engineering

Abstract:Compromising productivity in exchange for energy saving does not appeal to highly capitalized manufacturing industries. However, we might be able to maintain the same productivity while significantly reducing energy consumption. This paper addresses a flexible job shop scheduling problem with a shutdown (on/off) strategy aiming to minimize makespan and total energy consumption. First, an alternative mixed integer linear programming model is proposed. Second, a novel constraint programming is proposed. Third, practical operational scenarios are compared. Finally, we provide benchmarking instances, CPLEX codes, and genetic algorithm codes, in order to promote related research, thus expediting the adoption of energy-efficient scheduling in manufacturing facilities. The computational study demonstrates that (1) the proposed models significantly outperform other benchmark models and (2) we can maintain maximum productivity while significantly reducing energy consumption by 14.85% (w/o shutdown) and 15.23% (w/shutdown) on average.

engineering, multidisciplinary,mathematics, interdisciplinary applications
PENERAPAN ALGORITMA K-MEANS CLUSTERING UNTUK MENGANALISA TRANSAKSI PENJUALAN JASA CETAK PADA UNIT PRINT ON DEMAND (POD) PERCETAKAN GRAMEDIA

Goldie Gunadi

DOI: https://doi.org/10.37365/jti.v8i2.148

2022-11-30

Abstract:Data mining is a method used to obtain valuable information contained in data banks. The information obtained can be used as input for determining the business strategy for the head of the company's agency. One of the most widely used data mining techniques is clustering using the K-Means method. Print on Demand (PoD) is one of the printing business units of PT. Gramedia which specifically provides printing services for various types of products, including: books, magazines, calendars, posters, promo materials such as product catalogs and brochures, as well as small-sized products such as business cards, tickets, coupons or vouchers and stickers. Currently every sales transaction data is stored in a SQL Server database, but until now the data processing is still done manually for reporting needs for company management. The purpose of this research is to perform K-Means Clustering analysis of the transaction data of sales of print services using the RapidMiner application to classify routine customer data based on the number of transactions made for each type of print product. The results of the application of the K-Means Clustering method resulted in 8 groups of customer data where the largest group consisted of 92.89% of the number of customers. The results of the analysis can be used by the company's management to determine various business strategies to increase the company's competitiveness.
Multi-parallel work centers scheduling optimization with shared or dedicated resources in low-volume low-variety production systems

Arya Russell,Sharareh Taghipour

DOI: https://doi.org/10.1016/j.apm.2019.11.047

IF: 5.336

2020-04-01

Applied Mathematical Modelling

Abstract:A new methodology for modeling large-scale scheduling problems in low-volume low-variety production systems is proposed through this paper. Such scheduling problems are constrained by limited time and resources, where each work center is assigned a unique statement of work, to be completed on-time with the budgeted number of resources. Products assembled in low-volume low-variety production systems are processed through a series of stations referred to as work centers, where varying levels and classifications of resources are deployed onto the product. Aircraft, heavy aero-structures, and heavy military equipment are examples of products assembled in low-volume low-variety production systems. To ensure products are delivered on-time and on-budget, it is crucial to execute to a detailed schedule, such that all precedence, resource, zonal, and other constraints and characteristics inherent in such production systems are successfully satisfied. Despite the criticality of detailed schedules in delivering products on-time and on-budget, limited research is reported on mixed-integer programming approaches for scheduling optimization of activities in low-volume low-variety production systems. The discrete-time linear mixed-integer mathematical programming model developed in this paper fills the gap in the current literature with a direct impact on the organizations' service levels and bottom line. The proposed mathematical programming models are validated through a real-world case-study of the assembly process of a narrow body aircraft to ensure compatibility in the modeling of large-scale industrial problems.

mechanics,engineering, multidisciplinary,mathematics, interdisciplinary applications
A Linear Programming Model for Product Mix Profit Maximization in A Small Medium Enterprise Company

S Mohd Baki,Jack Kie Cheng

DOI: https://doi.org/10.15282/ijim6120205330

2020-03-05

International Journal of Industrial Management

Abstract:Production planning is often challenging for small medium enterprises (SMEs) company. Most of the SMEs are having difficulty in determining the optimal level of the production output which can affect their business performance. Product mix optimization is one of the main key for production planning. Many company have used linear programming model in determining the optimal combination of various products that need to be produced in order to maximize profit. Thus, this study aims for profit maximization of a SME company in Malaysia by using linear programming model. The purposes of this study are to identify the current process in the production line and to formulate a linear programming model that would suggest a viable product mix to ensure optimum profitability for the company. ABC Sdn Bhd is selected as a case study company for product mix profit maximization study. Some conclusive observations have been drawn and recommendations have been suggested. This study will provide the company and other companies, particularly in Malaysia, an exposure of linear programming method in making decisions to determine the maximum profit for different product mix.
Implementasi Metode Multi-Objective Optimization On The Basis Of Ratio Analysis dalam Seleksi Mahasiswa Program Indonesia Pintar

Abdul Karim

DOI: https://doi.org/10.47065/bulletincsr.v3i5.283

2023-08-31

Abstract:The Smart Indonesia Program (PIP) is assistance in the form of cash, expanding access, and learning opportunities from the government which are given to students and students who come from poor or vulnerable families to finance education. This study uses decision support system techniques with the Multi-Objective Optimization method basically of Ratio Analysis (MOORA) which can help in determining a good ranking. Criteria for Rapot Score, Parents' Income, Achievement, Place of Residence, PKH Recipients, KKS Participants. The results of applying the MOORA method of selecting the Smart Indonesia Student Selection Program are types with a value of 0.191937493 in Alternanip A10
Penyelesaian Vehicle Routing Problem Untuk Efisiensi Rute Pendistribusian Produk Minuman Teh Pucuk Harum Menggunakan metode Saving Matriks Studi Kasus (PT. Cipta Niaga Semesta Palu)

R Putrafi,A Sahari

DOI: https://doi.org/10.22487/2540766x.2020.v17.i1.15164

2020-06-01

JURNAL ILMIAH MATEMATIKA DAN TERAPAN

Abstract:Vehicle Routing Problem Is a Problem related to the route of product distribution to the consumers. With the existence of these problems a company is expected to seek away a way so that the distribution process can arrive on time to scattered consumers and obtain more efficient routes and costs. Therefore a method which can help the process of scheduling a good route and obtaining optimum costs and efficient delivery was used. One of the methods used was Saving Matrix, which in its operation could efficient the delivery route so that the minimum total distance was obtained. The company's actual mileage was greater than the distance travelled by the route after using the Saving Matrix method. The total difference in distance produced was 106,35 km or more saving 41,2 % from the actual distance of the company and using Saving Matrix could save the distribution costs of Rp. 5.687.640 or save 33,8 % of the cost before applying the method.
Penerapan Lean Operation Guna Meminimalkan Produk Cacat Menggunakan Metode PDCA

Arief Setyani Komara Arief Setyani Komara Sugama

DOI: https://doi.org/10.36456/wahana.v73i1.3337

2021-07-01

WAHANA

Abstract:Increasingly complex global competition, uncertain customer demands, and increasing customer expectations are the driving forces in implementing more optimal productivity such as the lean operation. In carrying out its operational activities, the company’s production process has not been able to run efficiently due to waste of defective products. This study uses primary and secondary data. This study also uses observation and documentation data collection method. To implement lean operation, the PDCA method is used which supported by tools such as the seven basic tools of TQM, VSM, and FMEA. By implementing the lean operation, it has been proved to reduce the number of defective products. For ODAKPR products, defects from overlock results are not paralleled decreased 72,95% to 102 pieces, perforated overdeck stitches decreased 76,42% to 75 pieces, misalignment of labels decreased 78,15% to 52 pieces. For OJAKPR products, defects from overlock results are not paralleled decreased 62,40% to 97 pieces, perforated overdeck stitches decreased 69,06% to 69 pieces, misalignment of labels decreased 73,77% to 48 pieces. For CJPPR products, defects of overdeck suture distance decreased 65,80% to 92 pieces, misalignment of labels decreased 76,76% to 56 pieces, overlock results are not paralleled decreased 77,96% to 41 pieces.
APLIKASI E-COMMERCE BERBASIS WEB MENGGUNAKAN METODE WEIGHTED MOVING AVERAGE DAN K-MEDOIDS

Arthian Terry Sammatha Sudarthio,Bagus Mulyawan,Darius Andana Haris

DOI: https://doi.org/10.24912/jiksi.v8i1.11461

2020-01-01

Jurnal Ilmu Komputer dan Sistem Informasi

Abstract:Sugi Jaya Mandiri, Ltd. is a company specializing in sales of industrial equipments, such as cables, pipes, construction materials, machine spareparts et cetera. The company processes data manually by using Microsoft Excel. The process complicates data recapitulation, especially concerning large amounts of data. Another issue is the lack of advertising towards customer. This application aims to solve the problems by implementing data processing feature with Weighted Moving Average timeseries method and favourite product feature to better market products to prospective customers using k-Medoids clustering method.Preliminary evaluations using k-Medoids method shows two products fit to advertise by considering attributes such as sold amount, mean sold amount and transaction amount. Data evaluation using Weighted Moving Average method acquires sales forecast with Accuracy rate of 92.456%.

English Else
METODE MARKOV CHAIN DALAM PENGENDALIAN PERSEDIAAN UNTUK PERENCANAAN BIAYA PERSEDIAAN BAHAN BAKU PADA TOKO AIRIN BAKERY & CAKE SHOP

Putri Rahma Novia,Fibri Rakhmawati,Rima Aprilia

DOI: https://doi.org/10.46306/lb.v4i1.259

2023-04-30

Abstract:Airin Bakery & Cake Shop produces various kinds of cakes and bread. This shop is often faced with problems that occur, namely the supply of raw materials that are insufficient or excess so that the production process does not go well. This study aims to determine the ordering capacity and the right time to order raw materials to minimize the total cost of raw material inventory using the silver meal method. The total inventory cost is Rp. 14,637,947.4 less than the cost set by the company. Inventory control, which is a stochastic process, can also be carried out without regard to safety stock, lead time, and reorder points. The stochastic process of total inventory can be described by a finite number of states. The probability of transitions between these states is described by a markov chain. The markov chain method can predict future raw material inventory costs. After making several states on the amount of raw material inventory, a prediction of the future raw material inventory costs of Rp.31.747.932,98 is obtained

EVALUASI JADWAL PRODUKSI JOBSHOP UNTUK MEMINIMALKAN MAKESPAN MENGGUNAKAN MIXED INTEGER LINEAR PROGRAMMING

OPTIMALISASI PENDISTRIBUSIAN BARANG DENGAN MODEL MIXED INTEGER LINEAR PROGRAMMING PADA PT. LOGISTIK EKSPRESINDO UTAMA

Meningkatkan UMKM Jus Buah Bu Ida dengan Mengoptimumkan Penjualan Menggunakan Metode Simpleks dalam Linear Programming

Optimization of production planning using integer linear programming method (case study of bakpia menik)

ANALISIS PENGENDALIAN BAHAN BAKU JASA MAKLON DENGAN MENGGUNAKAN METODE EOQ (ECONOMIC ORDER QUALITY) BERBASIS BIG DATA LOGISTIK GUNA MEMINIMALISIR BIAYA PRODUKSI PADA PT BARATA INDONESIA (PERSERO)

The Establishment of Decision Making Support Tool for Inventory Control and Production Planning with Periodic Review System and Linear Programming Approach

Aplikasi Kalkulator Full Costing UD Roti Bakery dengan Visual Basic 6.0

Proposed assembly line balancing using mixed integer programming to minimize idle time of union fuselage

Production scheduling by implementing Campbell Dudek Smith (CDS) and Dannenbring methods: A PVC pipe green production case study

Adaptive Production Rescheduling System for Managing Unforeseen Disruptions

Time and cost optimization using scheduling job shop and linear goal programming model

Development of Scheduling of Operating Rooms and Allocation of Inpatient Rooms Model by Considering Patient Preferences on Surgeon and Inpatient Room Classes

Energy-Aware Flexible Job Shop Scheduling Using Mixed Integer Programming and Constraint Programming

PENERAPAN ALGORITMA K-MEANS CLUSTERING UNTUK MENGANALISA TRANSAKSI PENJUALAN JASA CETAK PADA UNIT PRINT ON DEMAND (POD) PERCETAKAN GRAMEDIA

Multi-parallel work centers scheduling optimization with shared or dedicated resources in low-volume low-variety production systems

A Linear Programming Model for Product Mix Profit Maximization in A Small Medium Enterprise Company

Implementasi Metode Multi-Objective Optimization On The Basis Of Ratio Analysis dalam Seleksi Mahasiswa Program Indonesia Pintar

Penyelesaian Vehicle Routing Problem Untuk Efisiensi Rute Pendistribusian Produk Minuman Teh Pucuk Harum Menggunakan metode Saving Matriks Studi Kasus (PT. Cipta Niaga Semesta Palu)

Penerapan Lean Operation Guna Meminimalkan Produk Cacat Menggunakan Metode PDCA

APLIKASI E-COMMERCE BERBASIS WEB MENGGUNAKAN METODE WEIGHTED MOVING AVERAGE DAN K-MEDOIDS

METODE MARKOV CHAIN DALAM PENGENDALIAN PERSEDIAAN UNTUK PERENCANAAN BIAYA PERSEDIAAN BAHAN BAKU PADA TOKO AIRIN BAKERY & CAKE SHOP