Abstract:This present study focused on the synthesis of BTHAAlg and BTHAGel hybrid composites using bentonite (BT), hydroxyapatite (HA), alginate (Alg) and gelatin (Gel) materials by in situ method. The developed BTHAAlg and BTHAGel bio‐clay‐ceramic hybrid composites were utilized for methylene blue (MB) adsorption. The developed BTHAAlg and BTHAGel hybrid composites can be reusable upto five cycles. Dyeing industries release their hazardous dyeing effluents into the environment which affects the human health and ecosystem. Hence, the removal of dye from waste‐water is mandatory one. In this present study, focus on the fabrication of bio‐clay‐ceramic hybrid composites by dispersing bentonite (BT) clay and ceramic hydroxyapatite (HA) into alginate (Alg) and gelatin (Gel) polymeric matrixes by in‐situ method which gives BTHAAlg and BTHAGel hybrid composites for methylene blue (MB) removal. The various adsorption influencing parameters such as shaking time, adsorbent dosage, pH and initial MB concentration were optimized under batch method. The highest MB adsorption capacities of BTHAAlg and BTHAGel composites were found to be 43.70 and 47.50 mg/g respectively with optimized conditions of 100 mg/L of initial MB concentration, 40 min shaking time and 0.1 g dosages. In pH studies, the high MB adsorption capacity of bio‐clay‐ceramic composites were noticed at pH 11. The characterization techniques like FTIR, SEM and EDAX analysis were performed to find the physico‐chemical properties of bio‐clay‐ceramic composites. The equilibrium data of hybrid composites towards MB adsorption was well fitted with Langmuir isotherm model than D‐R and Fruendlich models because of higher r and low sd values. The negative values of ▵Go at three different temperatures (303, 313 and 323 K) indicate that the spontaneous nature of MB adsorption, while positive values of ΔHo and ΔSo revealed that the MB adsorption onto hybrid composites was endothermic in nature and more randomness occurred at solid/liquid interfaces. In kinetic studies, the MB adsorption onto hybrid composites was well fitted with pseudo‐second‐order and intra‐particle diffusion models. The electrostatic attraction and hydrogen bonding plays a dominant role in MB adsorption onto BTHAAlg and BTHAGel bio‐clay‐ceramic composites. The regeneration studies proposed that the hybrid composites can be reusable upto five cycles. Hence, the developed bio‐clay‐ceramic hybrid composites were act as best adsorbents for MB removal.

Hybrid Banana Pseudo Stem biochar- poly (N-hydroxyethylacrylamide) hydrogel and its magnetic nanocomposite for effective remediation of dye from wastewater

Development of banana pseudo stem cellulose fiber based magnetic nanocomposite as an adsorbent for dye removal

Modified gum ghatti based hybrid hydrogel nanocomposite as adsorbent material for dye removal from wastewater

Development of gum acacia based magnetic nanocomposite adsorbent for wastewater treatment

Carboxymethyl cellulose grafted poly(acrylamide)/magnetic biochar as a novel nanocomposite hydrogel for efficient elimination of methylene blue

Surface charge alteration of charcoal derived from bamboo leaves and understanding the interaction with anionic and cationic dye

Encapsulated cobalt-doped coconut husk biochar (Co@CHBc) for the remediation of anionic dye from wastewater

In Situ Synthesis of Magnetic Poly(DMAEAB-co-NIPAm)@Fe3O4 Composite Hydrogel for Removal of Dye from Water

A smart and sustainable pathway for abatement of single and binary mixtures of dyes through magnetically retrievable Ca4Fe9O17 anchored on Biochar matrix

Biopolymer-Grafted, Magnetically Tuned Halloysite Nanotubes as Efficient and Recyclable Spongelike Adsorbents for Anionic Azo Dye Removal

Heavy metal and organic dye removal via a hybrid porous hexagonal boron nitride-based magnetic aerogel

A Biocompatible, pH-Sensitive, and Magnetically Separable Superparamagnetic Hydrogel Nanocomposite as an Efficient Platform for the Removal of Cationic Dyes in Wastewater Treatment

Multifunctional poly-(Acrylamide-acrylic acid)/sesbania gum/bentonite hydrogel composite for removal of methylene blue and malachite green dyes from water

Facile Fabrication of Hydroxyapatite and Bentonite Encapsulated Biopolymeric Hybrid Composites for Selective Removal of Methylene Blue

Enhanced hybrid hydrogel based on wheat husk lignin-rich nanocellulose for effective dye removal

Efficient Decontamination of Cationic Dyes from Synthetic Textile Wastewater Using Poly(acrylic acid) Composite Containing Amino Functionalized Biochar: A Mechanism Kinetic and Isotherm Study

Utilization of nano-biosorbents based on pine needles and banana peel for methylene blue removal: equilibrium, kinetics, thermodynamic study, and application

Humic acid functionalized magnetic nanomaterials for remediation of dye wastewater under ultrasonication: Application in real water samples, recycling and reuse of nanosorbents

Fabrication of magnetic activated carbon from corn-cob biomass for the removal of acidic dyes from wastewater

Highly Porous Poly(o-Phenylenediamine) Loaded Magnetic Carboxymethyl Cellulose Hybrid Beads for Removal of Two Model Textile Dyes

The application of magnetite biochar composite derived from parthenium hysterophorus for the adsorption of methylene blue from aqueous solution