Abstract:A series of sulfonated poly(arylene ether nitrile) (SPEN) copolymers with controlled degrees of sulfonation were successfully synthesized by the direct copolymerization of hydroquinonesulfonic acid potassium salt (SHQ), 2,6-difluorobenzonitrile (DFBN), and different proportions of bisphenols with different structures. Five bisphenols (bisphenol A, phenolphthalein, phenolphthalin, biphenol, and hydroquinone) were investigated for the syntheses of novel copolymers with controlled degrees of sulfonation and different compositions. The composition and structures of the SPEN copolymers were characterized by Fourier transform infrared spectroscopy. Due to their different structural units, the derived copolymers showed different glass transition temperatures of 171–199 °C, and also exhibited high thermal stability, with their 5 % weight loss temperatures ranging from 277 °C to 327 °C. Moreover, they all showed good flexibility and film-forming properties along with excellent tensile strengths of 51–67 MPa in the dry state and 18–41 MPa in the wet state. Solubility tests confirmed that the SPEN copolymers possess good solubility in polar solvents such as NMP, DMAc, DMF, and DMSO. Furthermore, these copolymer membranes exhibited good water uptake values ranging from 30.1 % to 71.2 %, and outstanding ion exchange capacities of 1.27–2.32 mmol g−1. Thus, the membranes presented good proton conductivities of 2.2 × 10−4 to 4.3 × 10−3 S cm−1 at 25 °C and 100 % RH. Furthermore, the SPEN copolymer membranes showed much lower methanol permeabilities and higher selectivities than Nafion 117. All of these attributes indicate that these SPEN copolymers are promising candidates for application in high-temperature proton exchange membranes.

Investigation into the performance decay of proton-exchange membranes based on sulfonated heterocyclic poly(aryl ether ketone)s in Fenton's reagent

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Modified sulfonated poly(phthalazinone ether ketone) membranes with inorganic particles for potential applications in PEMFCs

A Kinetic Model for the Chemical Degradation of Perfluorinated Sulfonic Acid Ionomers: Weak End Groups Versus Side Chain Cleavage

Effect of “bridge” on the performance of organic-inorganic crosslinked hybrid proton exchange membranes via KH550

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Proton exchange membrane deriving from sulfonated N-heterocyclic poly(aryl ether ketone)s containing ether-free proton conducting units and performing enhanced physicochemical stability and conduction properties

High performance sulfonated poly(phthalazinone ether phosphine oxide)s for proton exchange membranes

The Preparation of Metal–Organic‐Framework/Boron Phosphate Hybrid Materials for Improved Performances in Proton Exchange Membranes

Advanced proton exchange membrane prepared from N-heterocyclic poly(aryl ether ketone)s with pendant benzenesulfonic moieties and performing enhanced radical tolerance and fuel cell properties

High-performance proton exchange membrane derived from N-heterocycle poly(aryl ether sulfone)s with ether-free hydrophilic blocks and exhibiting good stability and proton-conducting performance

Chemical stability of proton exchange membranes synergistically promoted by organic antioxidant and inorganic radical scavengers

High Performance Proton Exchange Membranes Obtained by Adjusting the Distribution and Content of Sulfonic Acid Side Groups.

Proton-conducting membranes based on benzimidazole-containing sulfonated poly(ether ether ketone) compared with their carboxyl acid form

Performance of functionalized graphene oxide with organic radical scavengers in proton exchange membranes

Proton exchange membranes based on sulfonated polybutylene fumarate: Preparation and characterization

Preparation and characterization of sulfonated polyether ether ketone/zirconium phosphate composite proton exchange membranes obtained by sol-gel process

Influence of Composition on the Proton Conductivity and Mechanical Properties of Sulfonated Poly(aryl Ether Nitrile) Copolymers for Proton Exchange Membranes

Influence of the Hydroquinone with Different Pendant Groups on Physical and Electrochemical Behaviors of Directly Polymerized Sulfonated Poly(ether Ether Sulfone) Copolymers for Proton Exchange Membranes

Novel sulfonated N-heterocyclic poly(aryl ether ketone ketone)s with pendant phenyl groups for proton exchange membrane performing enhanced oxidative stability and excellent fuel cell properties