Abstract:Objective To evaluate the accuracy and feasibility of a custom robot system guided by navigation for lateral skull base tumor biopsy.Methods Two cadaver heads were used,with iopamidol injected into different areas in the skull base and infratemporal region to imitate the tumor.Cone beam CT (CBCT) scanning was performed before operation.With image data transferred to the graphical user interface of the computer workstation,the "tumor"was segmented as the target.The needle trajectory was determined by selecting the skin entry point and the target point on the surgical planning software.Following point-based registration,the data was sent to the robot control unit.The needle was automatically inserted into the intended target by the robot guided by optical navigation.After the procedure was performed,the instantaneous data of needle tip position acquired by navigation system was sent back to the computer workstation for accuracy verification.Subsequently,after the needle was released,CBCT scanning was performed again,and the pre-and post-operative skull were superimposed.The position data of needle tip was acquired on the postoperative image and the accuracy was re-verified.The paired t-test was used to compare the differences in the accuracy calculated by intraoperative navigation and postoperative image fusion.The independent samples t-test was used to compare the accuracy between the cadavers.The Pearson correlation coefficients (r) was used to analyze correlation between the needle intervention accuracy and insertion depth.Results All 20 interventions were successfully performed.The mean deviation of the needle tip was (0.67± 0.28) mm (measured by the navigation system) and (3.19±0.39) mm (measured by image fusion) respectively (t=-23.238,P＜0.001).The comparison of accuracy test showed no significant difference between the cadavers (t=-1.116,P=0.279).Pearson correlation coefficients (r=0.714,P＜0.001) showed the close correlation between the needle intervention accuracy and insertion depth.The mean insertion depth was (5.14±0.21) cm.Conclusions The experimental results show that the robot system is efficient and reliable.The navigation accuracy and the needle deflection are the most significant factors affecting robotic puncture procedures.

Biopsy Needle System With a Steerable Concentric Tube and Online Monitoring of Electrical Resistivity and Insertion Forces

Development and Control of A Robotic Arm for Percutaneous Surgery

Tissue Cutting Mechanics and Applications for Needle Core Biopsy and Guidance

Collaborative Robotic Biopsy with Trajectory Guidance and Needle Tip Force Feedback

Design and Kinematic Modeling of a Novel Steerable Needle for Image-Guided Insertion

Design and evaluation of a novel biopsy needle with hemostatic function

Design of the Image-Guided Biopsy Marking System for Gastroscopy

Real-Time Curvature Detection of a Flexible Needle with a Bevel Tip

A Non-Invasive Navigation System for Retargeting Gastroscopic Lesions

Biopsy needle integrated with multi-modal physical/chemical sensor array

Modeling of path planning and needle steering with path tracking in anatomical soft tissues for minimally invasive surgery

Autonomous Medical Needle Steering In Vivo

Needle-tissue interactive mechanism and steering control in image-guided robot-assisted minimally invasive surgery: a review

Flexible Tip-Steerable Needle Control with Tissue Uncertainty

Shape Manipulation of Bevel-Tip Needles for Prostate Biopsy Procedures: A Comparison of Two Resolved-Rate Controllers

Accuracy analysis of robotic assistant needle placement for lateral skull base biopsy

Needle Steering for Robot-Assisted Insertion into Soft Tissue: A Survey

Performance of Robotic Assistance for Skull Base Biopsy: A Phantom Study.

Design of micro biopsy device for wireless autonomous endoscope

Bevel-Tip Needle Deflection Modeling, Simulation, and Validation in Multi-Layer Tissues

A Preliminary Add-on Differential Drive System for MRI-Compatible Prostate Robotic System