Abstract:Purpose A computational fluid dynamics (CFD) analysis has been carried out on the aerodynamic and thermal behavior of an incompressible Newtonian fluid having a constant property and flowing turbulently through a two-dimensional horizontal high-performance heat transfer channel with a rectangular cross section. The top surface of the channel was kept at a constant temperature, while it was made sure to maintain the adiabatic condition of the bottom surface. Two obstacles, with different shapes, i.e. flat rectangular and V-shaped, were inserted into the channel; they were fixed to the top and bottom surfaces of the channel in a periodically staggered manner to force vortices to improve the mixing and consequently the heat transfer. The first fin-type obstacle is placed on the heated top channel surface, and the second baffle-type one is placed on the insulated bottom surface. Five different obstacle situations were considered in this study, which are referred as cases FF (flat fin and flat baffle), FVD (flat fin and V-downstream baffle), FVU (flat fin and V-upstream baffle), VVD (V-downstream fin and V-downstream baffle) and VVU (V-Upstream fin and V-upstream baffle). Design/methodology/approach The flow model is governed by Reynolds-averaged Navier–Stokes equations with the k-epsilon turbulence model and the energy equation. These governing equations are discretized by the finite volume method, in two dimensions, using the commercial CFD software FLUENT software with the Semi Implicit Method for Pressure Linked Equations (SIMPLE) algorithm for handling the pressure-velocity coupling. Air is the test fluid with the flow rate in terms of Reynolds numbers ranging from 12,000 to 32,000. Findings Important deformations and large recirculation regions were observed in the flow field. A vortex causes a rotary motion inside the flow field, which enhances the mixing by bringing the packets of fluid from the near-wall region of the channel to the bulk and the other way around. The largest value of the axial variations of the Nusselt number and skin friction coefficient is found in the region facing the baffle, while the smallest value is in the region near the fin, for all cases. The thermal enhancement factor (TEF) was also introduced and discussed to assess the performance of the channel for various obstacle situations. It is found that the TEF values are 1.273-1.368, 1.377-1.573, 1.444-1.833, 1.398-1.565 and 1.348-1.592 for FF, FVD, FVU, VVD and VVU respectively, depending on the Re values. In all cases, the TEF was found to be much larger than unity; its maximum value was around 1.833 for FVU at the highest Reynolds number. Therefore, the FVU may be considered as the best geometrical configuration when using the obstacles to improve the heat transfer efficiency inside the channel. Originality/value This study can be a real application in the field of shell-and-tube heat exchangers and flat plate solar air collectors.

Body Shape Optimisation for Enhanced Aerodynamic Cooling

Aerothermodynamic Shape Optimization of a Hypersonic Lifting Body

Multiobjective Shape Optimization of A Hypersonic Lifting Body Using A Correlation-Based Transition Model

Gradient-Based Aerothermodynamic Optimization of A Hypersonic Wing Profile

Sensitivity-Based Parameterization for Aerodynamic Shape Global Optimization

Aero Heating Optimization of a Hypersonic Thermochemical Non-Equilibrium Flow around Blunt Body by Application of Opposing Jet and Blunt Spike

Adjoint-based shape optimization for compressible flow based on volume penalization method

Adjoint shape optimization for enhanced heat transfer in sweeping jet impingement on concave surface

Revisiting the optimal shape of cooling fins: A one-dimensional analytical study using optimality criteria

Shape Optimization in the Navier‐Stokes Flow with Thermal Effects

Evaluation of Various Flow Control Methods in Reducing Drag and Aerodynamic Heating on the Nose of Hypersonic Flying Objects

Turbulent Flow and Heat Transfer Enhancement for Turbine Blade Trailing Edge Cooling with Gyroid-Type Triply Periodic Minimal Surfaces

Aerodynamic Shape Optimization with Grassmannian Shape Parameterization Method

Integrated Aerodynamic Shape and Aero-Structural Optimization: Applications from Ahmed Body to NACA 0012 Airfoil and Wind Turbine Blades

A Mesh-Based Approach for Computational Fluid Dynamics-Free Aerodynamic Optimisation of Complex Geometries Using Area Ruling

Automated shape optimisation of a plane asymmetric diffuser using combined Computational Fluid Dynamic simulations and multi-objective Bayesian methodology

Fluid-Thermal Topology Optimization of Gas Turbine Blade Internal Cooling Ducts

Multi-objective Optimization Towards Cooling Performance of Teardrop Section Kagome Trusses Array Jet Impingement Composite Cooling Structure with Cross-Flow

Enhanced Thermal Performance of a Pin-Fin Cooling Channel for Gas Turbine Blade by Density-Based Topology Optimization

Baffle orientation and geometry effects on turbulent heat transfer of a constant property incompressible fluid flow inside a rectangular channel

Numerical Investigation on a Double Layer Combined Cooling Structure for Aerodynamic Heat Control of Hypersonic Vehicle Leading Edge