Abstract:Due to the concerns about the depletion of fossil fuel sources and the deteriorating environment, the attempt to investigate the production of renewable energy will play a crucial role as a potential to alleviate the dependency on mineral fuels. One particular area of interest is generation of bio-oil through sewage sludge (SS) pyrolysis. SS can be a potential candidate in contrast to other types of biomasses due to its availability and low cost. However, the presence of high molecular weight hydrocarbons and oxygenated compounds in the SS bio-oil hinders some of its fuel applications. In this context, catalytic pyrolysis is another attainable route to upgrade bio-oil quality. Among different catalysts (i.e., zeolites) studied for SS pyrolysis, activated chars (AC) are eco-friendly alternatives. The beneficial features of AC derived from SS comprise the comparatively large surface area, porosity, enriched surface functional groups and presence of a high amount of metal species that can improve the catalytic activity. Hence, a sludge-based AC catalyst was fabricated in a single-step pyrolysis reaction with NaOH as the activation agent and was compared with HZSM5 zeolite in this study. The thermal decomposition and kinetics were invested via thermogravimetric analysis (TGA) for guidance and control of pyrolysis and catalytic pyrolysis and the design of the pyrolysis setup. The results indicated that the pyrolysis and catalytic pyrolysis contain four obvious stages and the main decomposition reaction occurred in the range of 200-600 °C. Coats-Redfern method was applied in the 2nd and 3rd devolatilization stages to estimate the reaction order and activation energy (E) from the mass loss data. The average activation energy (Em) values for the reaction orders n = 1, 2 and 3 were in the range of 6.6720.37 kJ/mol for SS; 1.51-6.87 kJ/mol for HZSM5; and 2.29-9.17 kJ/mol for AC, respectively. According to the results, AC and HZSM5 both were able to improve the reaction rate of SS pyrolysis by abridging the Em value. Moreover, to generate and examine the effect of the catalysts on the quality of bio-oil, a fixed-bed pyrolysis system was designed and implemented. The composition analysis of the produced bio-oil was carried out via gas chromatography/mass spectrometry (GC/MS). The selected SS to catalyst ratios were 1:1, 2:1 and 4:1. The optimum ratio in terms of cracking the long-chain hydrocarbons and removing oxygen-containing compounds was 1:1 for both catalysts. The upgraded bio-oils with HZSM5 and AC were in the total range of C4-C17 with around 72% in the range of C4-C9. The bio-oil from pyrolysis of SS contained 49.27% oxygenated compounds while the presence of HZSM5 and AC dropped to 7.3% and 13.02%, respectively. Meanwhile, generation of value-added chemicals such as light aromatic compounds were significantly improved in the catalytic process. Furthermore, the fabricated AC catalyst was characterized by BET, SEM-EDX, FT-IR and TGA techniques. Overall, this research demonstrated that AC is an efficient catalyst in the pyrolysis of SS and can be used as a cost-competitive catalyst in contrast to HZSM5. Z. C. is with the Department of Building, Civil, and Environmental Engineering, Concordia University, Montreal, Canada H3G 1M8 (corresponding author, e-mail: zhichen@bcee.concordia.ca). Keywords—Activated char, bio-oil, catalytic pyrolysis, HZSM5, sewage sludge.

A Study of Catalytic Copyrolysis of Sewage Sludge and Waste Plastics Using Taguchi Method

A Study of Copyrolysis Characteristics of Sewage Sludge and Waste Polypropylene

Ex-Situ Catalytic Pyrolysis of Wastewater Sewage Sludge - A Micro-Pyrolysis Study

Investigation of Catalytic Co-Pyrolysis Characteristics and Synergistic Effect of Oily Sludge and Walnut Shell

Enhancement of catalytic combustion and thermolysis for treating polyethylene plastic waste

Catalyst-mediated pyrolysis of waste plastics: tuning yield, composition, and nature of pyrolysis oil

Co-pyrolysis of Oil Sludge with Hydrogen-Rich Plastics in a Vertical Stirring Reactor: Kinetic Analysis, Emissions, and Products

Probing the influence of synthesized hierarchical ZSM-5 catalyst in ex-situ catalytic conversion of real-world plastic waste into aromatic rich liquid oil

Study on the kinetics of catalytic pyrolysis of single and mixed waste plastics by spent FCC catalyst

Catalytic Pyrolysis of Sewage Sludge for Upgrading Bio-Oil Quality Using Sludge-Based Activated Char as an Alternative to HZSM5

Catalytic copyrolysis of metal impregnated biomass and plastic with Ni‐based HZSM‐5 catalyst: Synergistic effects, kinetics and product distribution

Synergistic interactions between sewage sludge, polypropylene, and high-density polyethylene during co-pyrolysis: An investigation based on iso-conversional model-free methods and master plot analysis

Researches on The Low-temperature Catalyst Pyrolysis of Sewage Sludge

Catalytic Pyrolysis of Polypropylene Plastics and Product Properties with Fe-loaded Sludge Biochar

Co-pyrolysis of Sewage Sludge with Hydrogen-Rich Polythene: Effects on Synergistic Promotion and Bio-Oil Quality

Effect of Reaction Conditions on Pyrolysis Performance of Waste Plastics Loaded with Ni/ZSM-5 Catalyst

Catalytic Pyrolysis of Polyethylene and Polypropylene Over Y Zeolite

OPTIMIZATION OF NATURAL CATALYSTS IN OIL PRODUCTION FROM PLASTIC WASTE PYROLYSIS

Thermal and catalytic pyrolysis of a synthetic mixture representative of packaging plastics residue

Products obtained from catalytic pyrolysis of oily sludge over ZSM-5 zeolite

Influence of the Ratio of Fe/Al2O3 on Waste Polypropylene Pyrolysis for High Value-Added Products