Abstract:The progress of industrial and agricultural pursuits, along with the release of inadequately treated effluents especially phenolic pollutant, has amplified the pollution load on environment. These organic compounds pose considerable challenges in both drinking water and wastewater systems, given their toxicity, demanding high oxygen and limited biodegradability. Thus, developing an eco-friendly, low-cost and highly efficient adsorbent to treat the organic pollutants has become an important task. The present investigation highlights development of a novel adsorbent (CFPAC) by activation of Cassia fistula pod shell for the purpose of removing phenol and 2,4-dichlorophnenol (2,4-DCP). The significant operational factors (dosage, pH, concentration, temperature, speed) were also investigated. The factors such as pH = 2 and T = 20°C were found to be significant at 1.6 g/L and 0.6 g/L dosage for phenol and 2,4-DCP respectively. Batch experiments were further conducted to study isotherms, kinetic and thermodynamics studies for the removal of phenol and 2,4-DCP. The activated carbon was characterised as mesoporous (specific surface area 1146 m 2 /g, pore volume = 0.8628 cc/g), amorphous and pH PZC = 6.4. At optimum conditions, the maximum sorption capacity for phenol and 2,4-DCP were 183.79 mg/g and 374.4 mg/g respectively. The adsorption isotherm was better conformed to Redlich Peterson isotherm (phenol) and Langmuir isotherm (2,4-DCP). The kinetic study obeyed pseudo-second-order type behaviour for both the pollutants with R 2 > 0.999. The thermodynamic studies and the value of isosteric heat of adsorption for both the pollutants suggested that the adsorption reaction was dominated by physical adsorption (Δ H x < 80 kJ/mol). Further, the whole process was feasible, exothermic and spontaneous in nature. The overall studies suggested that the activated carbon synthesised from Cassia fistula pods can be a promising adsorbent for phenolic compounds.

Integration of carbon microcapsules with beef omasum like shells by interconnected Macropores for removal of phenol from aqueous solution

Phenol adsorption properties and microstructural changes of organically modified bentonite

Preparation of imprinted phenol gel with ultra-high adsorption capacity based on porous biochar: 5-stage tandem column, response surface method, and mechanism analysis

Phenol Adsorption Mechanism of Organically Modified Bentonite and Its Microstructural Changes

Comparison of Carbonized Materials from Wastes of Different Origin for Nonylphenol Removal by Adsorption

Adsorption of phenol from aqueous solution on activated carbons prepared from antibiotic mycelial residues and traditional biomass

The effective removal of phenol from aqueous solution via adsorption on CS/β-CD/CTA multicomponent adsorbent and its application for COD degradation of drilling wastewater

Enhanced adsorption of phenolic compounds using biomass-derived high surface area activated carbon: Isotherms, kinetics and thermodynamics

Incorporation of humic acid into biomass derived carbon for enhanced adsorption of phenol

Removal of phenol by lignin-based activated carbon as an efficient adsorbent for adsorption of phenolic wastewater

Rapid adsorption of triclosan and p-chloro-m-xylenol by nitrogen-doped magnetic porous carbon

Preparation and application of porous activated carbon using phenolic distillation residue

One-pot Synthesis of Ultrahigh Surface Area Porous Carbon from Coal Tar Residue: Characterization and Application in Phenol Removal

Phenol Adsorption Performance of Nitrogen-Doped Porous Carbon Derived from Silicon Oxycarbide Ceramics

Biodegradation of Phenol from Wastewater by Microorganism Immobilized in Bentonite and Carboxymethyl Cellulose Gel

Magnesium Bicarbonate–Walnut Shell Dual-Template Synthesis of Multifunctional Layered Porous Carbon for Enhanced Adsorption of Aqueous Chlorinated Organic Compounds

Enhanced adsorption of phenol from aqueous solution by carbonized trace ZIF-8-decorated activated carbon pellets

Carbon Nanotube-Grafted Chitosan and Its Adsorption Capacity for Phenol in Aqueous Solution.

Peroxymonosulfate-activated molecularly imprinted bimetallic MOFs for targeted removal of PAHs and recovery of biosurfactants from soil washing effluents

Ionic Liquid Agar–Alginate Beads as a Sustainable Phenol Adsorbent

Phenanthroline-based microporous organic materials for removal of Cu(II) from aqueous solution and reutilization of spent adsorbent as catalysts