An Assessment of a Photovoltaic System's Performance Based on the Measurements of Electric Parameters under Changing External Conditions

Agata Zdyb,Dariusz Sobczyński

DOI: https://doi.org/10.3390/en17092197

IF: 3.2

2024-05-04

Energies

Abstract:This article presents an analysis of the performance of a 14.04 kWp grid-connected photovoltaic (PV) installation consisting of monocrystalline silicon, polycrystalline silicon and bifacial glass–glass monocrystalline silicon modules. The photovoltaic system was mounted in Poland, a location characterized by temperate climate conditions. On the basis of the obtained results, the photovoltaic parameters were determined in accordance with the international standard. The annual energy yield of the entire system was 1033 kWh/kWp, and the performance ratio achieved was 83%. The highest average daily final yield was in the range of 4.0–4.5 kWh/kWp for each photovoltaic technology under investigation. In the cold part of the year, the efficiency of the photovoltaic modules was estimated to be 15%, and it was estimated to be 7% during the warm part of the year. Array capture losses accounted for around 0.75 kWh/kWp of energy loss per day, whereas the inverter efficiency was over 95% during the months that are beneficial for energy production.

energy & fuels

What problem does this paper attempt to address?

This paper attempts to address the issue of performance evaluation of different types of photovoltaic (PV) systems (including monocrystalline silicon, polycrystalline silicon, and bifacial monocrystalline silicon modules) under actual external conditions in Poland's temperate climate. Specifically, the study focuses on the following aspects:

1. **Performance of PV systems under different climatic conditions**:
- Investigate how the power generation efficiency of PV systems varies across different seasons (cold season and warm season).
- Analyze the impact of solar radiation intensity and ambient temperature on the performance of PV modules.

2. **Comparison of standardized performance indicators**:
- Use standardized PV performance indicators to compare the performance of different PV system configurations at various locations.
- Provide a benchmark for evaluating the advantages and disadvantages of PV technologies under different climatic conditions.

3. **Practical application of bifacial PV modules**:
- Evaluate the performance of bifacial PV modules in real-world environments, especially in high-latitude regions.
- Explore the advantages of bifacial modules compared to traditional monofacial modules.

4. **Meteorological data and energy loss analysis**:
- Record in detail the energy output, performance ratio, module efficiency, inverter efficiency, array yield, final yield, and losses of PV systems throughout the year.
- Analyze the impact of meteorological data over the entire year, particularly in terms of energy losses.

Through these studies, the authors hope to provide more detailed data support for investors when planning PV installations and to promote the application and development of bifacial PV technology.