Abstract:Adlayer chemistry has been a significant subject of interest in physical chemistry over the past decades. Considerable attention has been paid to the development of high-performance film-based gas sensors, and tremendous progress has been achieved. Among the different analytical techniques, fluorescence - sensing provides a highly sensitive and selective method for detecting a wide variety of analytes. Film-based fluorescent sensors have emerged as one of the most promising candidates for chemical sensing and are being further developed into portable devices. Theoretically, relative signal changes including static and dynamic characteristics are significantly used to determine the sensing process; these characteristics are associated with surface absorption, the interaction between the analytes and sensing adlayer, as well as desorption kinetics in the absence and presence of the targeted gaseous analytes. As revealed earlier, there are a number of factors that determine the sensing behavior of a film, and the most important factors have been identified. Firstly, the suitability of the employed sensing fluorophore, which is important as it ultimately determines the effectiveness of a sensing process. Secondly, the structure of the fluorescent adlayer of the film; this is another important factor as it significantly determines the efficiency of mass transfer, which is necessary for efficient and reversible sensing. Finally, the chemical nature and surface structure of the substrate as these could affect the sensing performance of the film via the screening or enriching of analyte molecules. However, in situ, online, fast, and sensitive detection and discrimination of toxic and hazardous species via vapor sampling is a challenge that will persist for many years. By using the simultaneous interaction of multiple analytes with different sensing materials, the sensor array-based approach can recognize the overall change in the composition of complex mixtures, rather than just identifying their specific elements. The data-rich outputs of array-based sensing methods have recently been widely adopted by the analytical community due to their improved capabilities with statistical and cheminformatic approaches during analysis. Moreover, the community has recognized that numerous complex sensing challenges cannot be solved with conventional analytical tools. In the past 20 years, our group has been committed to effectively research the formation of fluorescent sensitive films, optimization of sensing films, and fabrication of film-based fluorescent sensor arrays. A series of fluorescence sensitive thin-film materials have been developed, and high-performance fluorescence sensors have been successfully fabricated due to which a positive technological transformation has been achieved. Based on the recent progress in our group, this article briefly reviews the key points of the interactions between the gaseous analytes and adlayer. Moreover, their applications have also been addressed in the vapor phase detection of explosives, illicit drugs, and volatile organic contaminants based on the film-based fluorescent gas sensors. Further discrimination of the complex analytes was realized using a sensor array and pattern recognition strategy. It is strongly believed that our studies are the first to provide powerful fluorescent techniques for the efficient detection and discrimination of important or hazardous substances with remarkably different properties. Meanwhile, the large-scale production of our development demonstrates that interdisciplinary corporation and industry participation plays a vital role in converting laboratory techniques to a conceptual sensing system, which can manufacture commercial portable detectors. Furthermore, we offer insights on the future directions and challenges of film-based sensors in gas sensing.

Unambiguous Discrimination and Detection of Controlled Chemical Vapors by a Film‐Based Fluorescent Sensor Array

High-performance Virtual Sensors Array Based on a Single-chip FBAR for Volatile Organic Compounds (vocs) Detection and Classification

Determination of Explosives and Drugs Based on Chip-Based FAIMS Technology

Multichannel Discriminative Detection Of Explosive Vapors With An Array Of Nanofibrous Membranes Loaded With Quantum Dots

Non-contact identification and differentiation of illicit drugs using fluorescent films

Utilizing Different Diffusion Mechanisms for Thin Film Fluorescence-Based Detection and Discrimination of Illicit Drug Vapors

A portable and autonomous multichannel fluorescence detector for on-line and in situ explosive detection in aqueous phase.

Adlayer Chemistry on Film-based Fluorescent Gas Sensors

Discrimination of Five Classes of Explosives by a Fluorescence Array Sensor Composed of Two Tricarbazole-Nanostructures.

Fine structural tuning of fluorescent copolymer sensors for methamphetamine vapor detection

Highly Sensitive and Discriminative Detection of BTEX in the Vapor Phase: A Film-Based Fluorescent Approach.

Molecular design and architectonics towards film-based fluorescent sensing

Conjugated Polymer Nanoparticles Based Fluorescent Electronic Nose for the Identification of Volatile Compounds.

A single recognition unit-based virtual sensor Array: Applying 3D fluorescence spectroscopy to inner filter effect-based sensing

Recent advances in film-based fluorescence sensing

A rapid and efficient way to dynamic creation of cross-reactive sensor arrays based on ionic liquids.

A colorimetric sensor array for odour visualization

Portable Hydrogel-Based Tri-Channel Fluorescence Sensor Array for Visual Detection of Multiple Explosives

Discrimination of Saturated Alkanes and Relevant Volatile Compounds Via the Utilization of a Conceptual Fluorescent Sensor Array Based on Organoboron-Containing Polymers

Development of a Column-Shaped Fluorometric Sensor Array and Its Application in Visual Discrimination of Alcohols from Vapor Phase

A novel detector using a fluorescent sensor array and discrimination of pesticides