Abstract:In this study, successful joints were fabricated on 4-mm-thick aluminum alloy 5052 sheets by using friction stir spot welding (FSSW) method. This research thoroughly investigated the impacts of welding parameters, specifically dwell time (DT) and rotational speed (RS), on the microstructure, and joint efficiency mechanical characteristics of the joints. The finding of this study highlighted the importance of optimization of process parameters to achieve superior weld joints. The most noteworthy achievement of this study was the attainment of maximum tensile shear load TSL of 2439 N with 19.4% joint efficiency at DT of 2 s and RS of 1300 rpm. A remarkable 48% improvement was observed in the obtained results at lower RS of 850 rpm and longer DT of 5 s. Simultaneously, maximum microhardness was 37.2 HV which was attained in thermal–mechanical affected zone at DT of 2 s and RS of 850 rpm, which was about 51% higher than the condition involving lower RS. Microstructure examination unveiled the significant influences of process parameters on hook deformation and penetration around the pin area. Additionally, in this study, a novel prediction model was introduced to estimate the temperature evaluation and tensile shear load of the samples. The model was constructed employing various machine learning techniques, multi-linear regression (MLR), support vector machine (SVM), adoptive neuro-fuzzy inference system (ANFIS) and including artificial neural network (ANN). The results obtained using this model served as a pioneering approach to predict the tensile shear load and temperature evaluation of welded samples. Remarkably, ANFIS model surpassed the other models due to its accuracy in perdition. The average error of this model for tensile shear load was only 4.3%, and for temperature evaluation, it was only 0.803%. The outcome of this study revealed that this predictive model could be a milestone in this field, enabling more precise and reliable prediction of key welding process parameters which significantly enhanced the efficiency and quality of welding processes.

Performance Evaluation of Machine Learning-based Algorithm and Taguchi Algorithm for the Determination of the Hardness Value of the Friction Stir Welded AA 6262 Joints at a Nugget Zone

Process parameter optimization of 6061AA Friction Stir Welded Joints using Supervised Machine Learning Regression-based Algorithms

Process parameter optimization of Friction Stir Welding on 6061AA using Supervised Machine Learning Regression-based Algorithms

Machine learning algorithms for prediction of penetration depth and geometrical analysis of weld in friction stir spot welding process

Assessment of friction stir spot welding of AA5052 joints via machine learning

ANN modeling and optimization of friction stir welding performance for AA6061 and AA5083 alloy joints

Prediction of properties of friction stir spot welded joints of AA7075-T651/Ti-6Al-4V alloy using machine learning algorithms

Optimization of Dissimilar AA5052 and AA2219 Alloy Joints in Friction Stir Welding Using Taguchi Grey Relational Analysis

Optimization of 2024-T3 Aluminum Alloy Friction Stir Welding Using Random Forest, XGBoost, and MLP Machine Learning Techniques

Optimization of the Welding Parameters of High-Quality Aluminum/Copper FSSW Joints Using Taguchi Method Combined with Back Propagation Neural Network and Genetic Algorithm

Multiobjective Optimization of Friction Stir Welding Process Parameters on Aluminum Alloy AA 5083 Using Taguchi-Based Grey Relation Analysis

A Multiple Response Prediction Model for Dissimilar AA-5083 and AA-6061 Friction Stir Welding Using a Combination of AMIS and Machine Learning

Optimization of Process Parameters in Under Water Friction Stir Welded AA2014 and AA6082 joints.

Optimization and Characterization Studies of Dissimilar Friction Stir Welding Parameters of Brass and Aluminum Alloy 6063 Using Taguchi

Enhancing Predictive Capabilities: Machine Learning Approaches for Predicting Mechanical Behavior in Friction Stir Welded Aluminum Alloys

A Novel Method for Predicting Tensile Strength of Friction Stir Welded AA6061 Aluminium Alloy Joints Based on Hybrid Random Vector Functional Link and Henry Gas Solubility Optimization

Experimental investigation and optimization of mechanical properties on combination of higher and lower strength of aluminum alloys

Artificial intelligence algorithms for prediction of the ultimate tensile strength of the friction stir welded magnesium alloys

A Survey of Machine Learning in Friction Stir Welding, including Unresolved Issues and Future Research Directions

Post Weld Heat Treatment Optimization of Dissimilar Friction Stir Welded AA2024-T3 and AA7075-T651 Using Machine Learning and Metaheuristics

An integration of RSM and ANN modelling approach for prediction of FSW joint properties in AA7178/AA5456 alloys