Abstract:Polymerase chain reaction (PCR) is the most common method used for nucleic acid (DNA) amplification. The development of PCR-performing microfluidic reactors (μPCRs) has been of major importance, due to their crucial role in pathogen detection applications in medical diagnostics. Closed loop (CL) is an advantageous type of μPCR, which uses a circular microchannel, thus allowing the DNA sample to pass consecutively through the different temperature zones, in order to accomplish a PCR cycle. CL μPCR offers the main advantages of the traditional continuous-flow μPCR, eliminating at the same time most of the disadvantages associated with the long serpentine microchannel. In this work, the performance of three different CL μPCRs designed for fabrication on a printed circuit board (PCB) was evaluated by a computational study in terms of the residence time in each thermal zone. A 3D heat transfer model was used to calculate the temperature distribution in the microreactor, and the residence times were extracted by this distribution. The results of the computational study suggest that for the best-performing microreactor design, a PCR of 30 cycles can be achieved in less than 3 min. Subsequently, a PCB chip was fabricated based on the design that performed best in the computational study. PCB constitutes a great substrate as it allows for integrated microheaters inside the chip, permitting at the same time low-cost, reliable, reproducible, and mass-amenable fabrication. The fabricated chip, which, at the time of this writing, is the first CL μPCR chip fabricated on a PCB, was tested by measuring the temperatures on its surface with a thermal camera. These results were then compared with the ones of the computational study, in order to evaluate the reliability of the latter. The comparison of the calculated temperatures with the measured values verifies the accuracy of the developed model of the microreactor. As a result of that, a total power consumption of 1.521 W was experimentally measured, only ~7.3% larger than the one calculated (1.417 W). Full validation of the realized CL μPCR chip will be demonstrated in future work.

Thermal Bed Design for Temperature-Controlled DNA Amplification Using Optoelectronic Sensors

Digital Loop-Mediated Isothermal Amplification on a Commercial Membrane

Research on temperature measuring positions selection and verification for Polymerase Chain Reaction instruments.

Simulation and experimental study of temprature lag time for Polymerase Chain Reaction instrument

Low-Temperature Loop-Mediated Isothermal Amplification Operating at Physiological Temperature

A digital microfluidic system for loop-mediated isothermal amplification and sequence specific pathogen detection

Implementation of Rapid Nucleic Acid Amplification Based on the Super Large Thermoelectric Cooler Rapid Temperature Rise and Fall Heating Module

Loop-Mediated Isothermal Amplification Using a Lab-on-a-Disc Device with Thin-film Phase Change Material

Detection and Application of Microfluidic Isothermal Amplification on Chip

Phosphorothioated Primers Lead to Loop-Mediated Isothermal Amplification at Low Temperatures.

Design and development of a field-deployable water bath for loop-mediated isothermal amplification assay

Highly Precise and Fast Polymerase Chain Reaction Thermal Cycling Module with a Novel Integrated Temperature Control Strategy

Study on Large Area Temperature Control System for a Low-cost PCR Chip

A Microchip-Based PCR Device Using Flexible Printed Circuit Technology

Three-Dimensional-Printed Instrument for Isothermal Nucleic Acid Amplification with Real-Time Colorimetric Imaging

Temperature control technology for PCR

Simulation of Rapid Thermal Cycle for Ultra-Fast PCR

Closed-Loop Microreactor on PCB for Ultra-Fast DNA Amplification: Design and Thermal Validation

Portable Heating System Based on a Liquid Metal Bath for Rapid PCR.

A Thermal Cycler Based on Magnetic Induction Heating and Anti-Freezing Water Cooling for Rapid PCR

Real-Time Detection of Loop-Mediated Isothermal Amplification Reaction on Microfluidic Chip