Abstract:Large-scale collimating solar simulators (CSSs) with a light half divergence angle (HDA) of less than 1° have been developed. The small HDA ensures that the CSS can effectively simulate the optical behavior between natural sunlight and optical devices. However, the construction of large-scale CSSs still has a strict threshold because additional optical modules (AOMs), such as large-area collimating mirrors, are usually required to correct the light into collimated light. The manufacturing, installation, and adjustment of these precision optical devices pose significant challenges. An excellent scheme to avoid AOMs is to use the collimating radiation module (CRM), which can directly produce collimated light. Unfortunately, CRM can only produce light with an HDA of more than 3° at present, far larger than that of CSS with AOMs. Here, we report a CRM that can directly produce light with excellent collimation (an HDA<0.955°) and uniformity (>90 %). We accomplished this by analyzing the deviations between an idealized geometric optical model and actual CRMs and eliminating them with high-precision parts and a high-resolution adjustment method. We further used 24 CRMs to prove that the single-module collimating solar simulator (SMCSS, a radiation area of 2.55 m × 1.57 m) could be modularly constructed by them. Experimental investigations involving light-concentrating experiments on a parabolic trough collector demonstrated the superior collimation and simulation capabilities of the SMCSS. By eliminating the need for AOMs, the CRM and SMCSS significantly reduce system complexity and cost and lower the construction threshold for large-scale CSSs. It will benefit all experimental scenarios that need large-area collimated light and greatly promote the application of large-scale CSS in civilian solar research.

Design and experimental verification on a deformable underwater solar concentrator with bi‐layer film structure

Design and experimental investigation on a solar concentrating photovoltaic underwater

Innovative Solar Concentrator Design for Space: Self-deployment and Energy Flux Density Uniformization

Optical and electrical behavior of an underwater linear-focusing solar concentrating photovoltaic

Constructing the Large-Scale Collimating Solar Simulator with a Light Half-Divergence Angle <1° Using Only Collimating Radiation Modules

3-D Underwater Acoustic Wave Focusing by Periodic Structure

Optical design of a solar dish concentrator based on hexagonal facets

Overall study of solar simulation optical system with large irradiated surface using free-form concentrator to improve uniformity

Design and Investigation of A Novel Lens-Walled Compound Parabolic Concentrator with Air Gap

Solar concentrators filled with liquid for enhancement of photocurrent generation and angular responses of light incidence

Design optimization and optical performance analysis on multi-sectioned compound parabolic concentrator with plane absorber

Design and Optical Performance Evaluation of the Three-Dimensional Solar Concentrators with Multiple Compound Parabolic Profiles and Elliptical and Rectangular Receiver Shapes

Simulation and on-site performance of a novel 3D concentrator for photovoltaic application

A concentrating light multistage rising film solar distiller with a central cooling structure

Development of a two-stage solar concentrator using fresnel lens and dish reflector

Optical design of a tension cable-membrane concentrator

A New Concept to Form Arc Cylinders to Parabolic Troughs Using Optimal Forces

Concentrating behavior of elastic fresnel lens solar concentrator in tensile deformation caused zoom

Design and Optical Analysis of the Band-Focus Fresnel Lens Solar Concentrator

Numerical investigation of the solar concentrating characteristics of 3D CPC and CPC-DC

Design of a Compound Parabolic Concentrator for a Multi-Source High-Flux Solar Simulator