Abstract:Optimal capacitor placement and network reconfiguration are well-known methods to minimize losses, enhance reliability, and improve the voltage profile of electric distribution networks (EDNs). Distribution network reconfiguration (DNR) consists of altering the system topology by changing the states of ties and sectionalizing switches, while the optimal placement of capacitors (OPCAs) involves sizing and finding the optimal location of capacitor banks within the distribution network for reactive power control. DNR and OPCAs are challenging optimization problems involving both integer and continuous decision variables. Due to the nature of these problems (combinatorial optimization problems), most approaches that deal with DNR and OPCAs resort to metaheuristic techniques, and they are limited to applications in small-size distribution networks. Although these techniques have proven to be effective when dealing with non-convex optimization problems, their main drawbacks lie in the fact that they require the fine-tuning of several parameters and do not guarantee the finding of a globally optimal solution. This paper presents a mixed-integer linear programming (MILP) model to solve simultaneous DNR and OPCAs in radial distribution networks. The proposed model can be solved by commercially available software; it guarantees to obtain globally optimal solutions and requires low computational effort when compared with metaheuristic techniques employed for the same purpose. Several tests were carried out on seven benchmark EDNs ranging from 33 to 417 buses. In all cases, the proposed methodology was able to replicate the results reported in the specialized literature. Regarding the DNR alone, a novel solution was found for the 119-bus test system which is 1.86 % better than that previously reported in the specialized literature. Furthermore, new solutions are reported for the simultaneous optimal DNR and OPCAs for medium and large-size EDNs. T- e power loss reduction in the test system ranged from 21.12 % to 68.93 % evidencing the positive impact of the proposed approach in EDNs.

Identifying critical demand scenarios for the robust capacitated network design problem using principal component analysis

An Objective-Based Scenario Selection Method for Transmission Network Expansion Planning with Multivariate Stochasticity in Load and Renewable Energy Sources

Surrogate-Based Optimization for Solving a Mixed Integer Network Design Problem

A Fast Hybrid Primal Heuristic for Multiband Robust Capacitated Network Design with Multiple Time Periods

On feasibility cuts for chance-constrained multicommodity network design problems

An Approach for Capacitated Network Design with Uncertain Demand

A Mixed-Integer Linear Programming Model for Simultaneous Optimal Reconfiguration and Optimal Placement of Capacitor Banks in Distribution Networks

Continuous Equilibrium Network Design Model under Demand and Capacity Uncertainty

Network planning under demand uncertainty with robust optimization

Service Network Design Problem with Capacity-Demand Balancing

Robust Service Network Design Under Demand Uncertainty

The Scenario Approach for Demand Response Providers in Capacity Markets

Multi-Commodity Multi-Facility Network Design

Robust Gas Pipeline Network Expansion Planning to Support Power System Reliability

A solution robustness approach applied to network optimization problems

A decomposition method for network-constrained unit commitment with AC power flow constraints

Two-stage robust multimodal hub network design under budgeted demand uncertainty: A Benders decomposition approach and a case study

Capacity Planning of Energy Hub in Multi-Carrier Energy Networks: A Data-Driven Robust Stochastic Programming Approach

Hub Network Design Problem with Capacity, Congestion and Heterogeneous Economies of Scale

Simulation-based analysis of second-best multimodal network capacity