Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. In this paper, experiments and numerical simulations were used to study the mechanical properties of all-C/C composite hybrid bonded/bolted joints. Experiments were conducted to investigate the failure mechanisms, modes, and strengths of composite single-lap joints, namely, bolted joints with and without bonds. The results demonstrated that the failure mode of all-C/C composite mechanical joints was bolt shear failure, while the failure mode of the bonded joints was cohesive force failure. In hybrid bonded/bolted joints, cohesive force failure of the adhesive layer and bolt shear failure have both been noted. The C/C composite plates of all joints were not discovered to have any evident deterioration. The load-displacement curve of the hybrid joints was a double-peak curve, the first peak load corresponds to bonding failure, and the second peak load corresponds to bolt failure. For the failure process, mode, and strength of hybrid (bonded/bolted) joints, a 3D progressive damage finite element model was proposed. It is based on the nonlinear finite element code ABAQUS and Hashion failure criteria. The VUMAT subroutine compiled Hashion failure criteria to simulate the damage of fiber and matrix in the composite material. Furthermore, the adhesive layer's failure was simulated using the cohesive element. Comparing failure loads and failure modes to the outcomes of experiments served to validate the model. The gradual damage evolution process and failure mechanism of bonded and hybrid bonded/bolted joints were determined, as well as the mechanism by which the cohesive layer influences the mechanical properties of the hybrid bonded/bolted joints. On the mechanical characteristics of composite joints, the impacts of bolt diameter and adhesive layer modulus were investigated.

Loading Capacities of Bonded Composite Pipe Joints of Different Structures

Investigation on Failure Mode of Short Carbon Fiber Reinforced Thermoplastic Composites Joints of Non-metallic Pipeline

Joint Capacity of Bonded Sleeve Connections for Tubular Fibre Reinforced Polymer Members

Study on progressive damage performance of basalt‐fiber wound composite tube

Bilinear Constitutive Model-Based Theoretical Study on Interfacial Properties of Pipeline Joints Coupling Tension and Temperature

The Bridging Analysis of Dynamic Crack Propagation in Fiber Reinforced Pe Pipelines

Analysis of the Mechanical Behaviors of Fiber Reinforced Unbonded Flexible Pipe Under Combined Load

The debonding failure analysis of corroded pipes repaired with CFRP under tension and the bending moment

Parametric study on the load-carrying capacity of plain-woven composites hybrid bonded-bolted joints

Experimental Investigation and Numerical Simulation of Bonded, Bolted, and Hybrid Joints in CFRP Laminates Under Tensile Loading

Mechanical properties of all-C/C composite hybrid bonded/bolted joints

Numerical Study on the Effect of Defect Length upon Burst Capacity of Composite Repaired Pipe

Theoretical analysis and numerical simulation of axial tensile behavior of pipe joints based on bi-linear cohesive bond-slip model

EXPERIMENTAL INVESTIGATION ON ADHESIVE BONDED JOINTS OF CARBON FIBER COMPOSITE LAMINATES CONTAINING DISBOND DEFECT

Structural Analysis of Fibreglass Reinforced Bonded Flexible Pipe Subjected to Tension

Study on interfacial mechanical properties of bonded pipe joint under dynamic load

Behavior of hybrid bonded/bolted GFRP single-lap joint under static tensile loading: An experimental and numerical study

Mechanical Characteristics of Fiber-Reinforced Flexible Pipe Subjected to Axial Tensile Load

Effect of fiber layout on low-velocity impact response of intralaminar hybrid carbon/glass fiber braided composite pipes under internal pressure

Application Of Compressive Strain Capacity Models To Multiple Grades Of Pipelines

Experimental study of bonded, bolted, and hybrid braided CFRP joints with different stacking sequences and lapping patterns