Abstract:<p>This article put forward an adaptive neural fault-tolerant control strategy for a class of switched nonlinear systems subject to actuator fault by means of the command filter approach. By using neural networks, the unknown nonlinear functions of the system under consideration are approximated, while its unmeasurable states are estimated by establishing a switched observer. Furthermore, the "explosion of complexity" issue, which arises from the derivatives of virtual controllers, is addressed with the command filter method. In order to reduce filter errors and overcome the drawbacks of the most traditional approaches, such as the ones based on dynamic surface control techniques, an error compensation mechanism was developed. In summary, by taking advantage of the command filter approach, backstepping algorithm, and average dwell time method, an adaptive NNs fault-tolerant controller is established for the system under consideration. Finally, the designed controller has the ability to make the reference signal which can be tracked by the output of the system as close as possible and the boundness of all signals within the closed-loop system can be guaranteed. The usefulness of the designed controller is illustrated by the simulation example.</p>

What problem does this paper attempt to address?

The problem this paper attempts to address is the design of an adaptive neural network fault-tolerant control strategy for a class of switched nonlinear systems with actuator faults. Specifically, the paper focuses on the following aspects: 1. **System Modeling and Control**: The research object is a class of switched nonlinear systems affected by actuator faults. These systems may encounter various uncertainties and external disturbances in practical applications, thus requiring a control strategy that can effectively cope with these challenges. 2. **Complexity Issue**: Traditional backstepping algorithms face the "complexity explosion" problem when dealing with high-order nonlinear systems, where the derivative calculation of virtual controllers becomes very complex. The paper addresses this issue by introducing command filtering technology, thereby simplifying the controller design process. 3. **State Estimation**: Since some states of the system are unmeasurable, the paper proposes a switched neural observer to estimate these states, thereby reducing conservativeness and improving control performance. 4. **Error Compensation**: To overcome the filtering error problem in traditional dynamic surface control technology, the paper introduces an error compensation mechanism that reduces tracking errors through compensation signals. 5. **Fault Tolerance**: The designed controller can ensure the normal operation of the system in the presence of actuator lock-in faults or control effectiveness loss, making the system output as close as possible to the reference signal while ensuring the boundedness of all signals in the closed-loop system. In summary, this paper aims to propose an effective adaptive neural network fault-tolerant control strategy to address actuator fault issues in switched nonlinear systems by combining command filtering technology, backstepping algorithms, and the average dwell time method.

Adaptive fault-tolerant control for switched nonlinear systems based on command filter technique

Adaptive Neural Control for Nonlinear Systems with Actuator Faults and Unknown Control Directions Via Command Filter

Adaptive Learning Based Fault Tolerant Control for Uncertain Nonlinear Systems

Fixed‐time adaptive fault‐tolerant tracking control for uncertain strict‐feedback nonlinear systems via command filtered backstepping

Command Filtered Neuroadaptive Fault-Tolerant Control for Nonlinear Systems With Input Saturation and Unknown Control Direction

Command Filter-Based Adaptive Fuzzy Switching Event-Triggered Control for Non-Affine Nonlinear Systems with Actuator Faults.

Command Filtering‐based Adaptive Neural Network Control for Uncertain Switched Nonlinear Systems Using Event‐triggered Communication

Adaptive Fault‐tolerant Control of Switched Nonlinear Systems Based on Tuning Function Method

Neural Network Adaptive Switched Fault-Tolerant Control of Uncertain Nonlinear Systems with Full State Constraints

Observer Based Adaptive Fault-Tolerant Control Of Switched Nonlinear Systems

Neural Networks-Based Adaptive Finite-Time Fault-Tolerant Control for a Class of Strict-Feedback Switched Nonlinear Systems

Finite Time Command Filtered Adaptive Fault Tolerant Control for a Class of Uncertain Nonlinear Systems

Adaptive Finite-Time Event-Triggered Command Filtered Control for Nonlinear Systems with Unknown Control Directions

Command filter‐based adaptive fixed‐time fault‐tolerant control for stochastic nonlinear systems with actuator hysteresis

Observer-Based Fault Tolerant Control for a Class of Nonlinear Systems Via Filter and Neural Network

Adaptive neural fault‐tolerant optimal control for nonlinear uncertain systems with dynamic state constraints

Command Filter-Based Finite-Time Adaptive Fuzzy Control for Nonlinear Systems with Uncertain Disturbance

Adaptive NNs backstepping fault control for a class of nonlinear systems

Command filter‐based event‐triggered adaptive neural network control for uncertain nonlinear time‐delay systems

Neural networks-based command filtering control of nonlinear systems with uncertain disturbance.

Command filtered‐based fixed‐time fault‐tolerant tracking control for nonlinear systems