Catalytic Effect Of Zinc Acetate On Products Distribution And Reaction Process Of Biomass Pyrolysis
Shanshan Li,Yang Pan,Liqiang Zhang,Lingrui Huang,Xifeng Zhu
DOI: https://doi.org/10.1360/N972019-00289
2019-01-01
Chinese Science Bulletin
Abstract:Zinc salt is widely used in biomass selective catalytic pyrolysis. Monitoring the formation process of target products in biomass pyrolysis through current experimental methods is difficult, and the evolution of pyrolysis products is rarely reported. Online pyrolysis photoionization time-of-flight mass spectrometry (Py-PI-TOFMS) can be conducted for the real-time monitoring of biomas pyrolysis process. In this study, the catalytic effects of zinc acetate on biomass pyrolysis products and process were investigated through pyrolysis experiments on rice hulls impregnated with zinc acetate of different concentrations. Pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) and Py-PI-TOFMS were performed. Before the loading of zinc acetate, the rice husk was washed with acetate acid for the removal of alkali and alkaline metals.Pyrolysis temperature was set at 400, 450, 500, 550, or 600 degrees C in the Py-GC/MS experiments, and the chemical compositions of the pyrolysis gases were analyzed. The results showed that the contents of acids, furans, and anhydrosugars increased, whereas those of phenols, aldehydes, and ketones decreased. Zinc acetate promoted the dehydration and cyclization reaction in cellulose and hemicellulose pyrolysis but suppressed the pyrolysis of lignin. At increased zinc acetate loading, the acid content continuously increased, furan, anhydrosugar, and ketone contents increased first and then stabilized, and the contents of aldehydes and phenolic products decreased first and then stabilized. Acetate acid, furfural, 1-hydroxy-3,6-dioxabicyclo[3.2.1]octan-2-one, and 4-vinylphenol yield increased under the catalytic effects of zinc acetate. The Lewis acidity of zinc acetate greatly increased the yield of furfural and1-hydroxy-3,6-dioxabicyclo [3.2.1]octan-2-one and decreased the yield of 4-vinylphenol significantly.The instantaneous mass spectrum of pyrolysis gas was obtained through Py-PI-TOFMS at a certain frequency during pyrolysis. The pyrolysis temperature was set at 400 degrees C. Different kinds of products reached the maximum production rate at different times. Under the catalysis of zinc acetate, the time for the maximum production rate of furan and cyclopentanone products was advanced, and the advancement increased with zinc acetate loading. The time-evolved profiles of m/z 96 and 126 showed that furfural was mainly generated at the early stage of biomass pyrolysis, and 5-hydroxymethylfurfural was mainly generated at the late stage. This showed that the main generation pathway of furfural is not the secondary cleavage of 5-hydroxymethylfurfural and the formation pathway of furfural and 5-hydroxymethylfurfural is competitive. Moreover, zinc acetate has no significant effect on the time at which the furfural reaches the maximum formation rate, but it can advance the time for the maximum production rate of 5-hydroxymethylfurfural.