Abstract:A steel–concrete composite beam bridge fully exploits the mechanical advantages of the concrete structure and steel structure, and has the advantages of a fast construction speed and large stiffness. It is of certain research value to explore the application of this bridge type in the field of railway bridges. However, with the rapid development of domestic high-speed railway construction, the problem of vibration and noise radiation of high-speed railway bridges caused by train loads is becoming more and more serious. A steel–concrete composite beam bridge combines the tensile characteristics of steel and the compressive characteristics of concrete perfectly. At the same time, it also has the characteristics of a steel bridge and concrete bridge in terms of vibration and noise radiation. This feature makes the study of the vibration and noise of the bridge type more complicated. Therefore, in this paper, the characteristics of vibration and noise radiation of a high-speed railway steel–concrete composite box girder bridge are studied in detail from two aspects: the theoretical basis and a numerical simulation. The main results obtained are as follows: Relying on the idea of vehicle–rail–bridge coupling dynamics, a structural dynamics analysis model of a steel–concrete combined girder bridge for a high-speed railroad was established, and numerical program simulation of the vibration of the vehicle–rail–bridge coupling system was carried out based on the parametric design language of ANSYS 18.0 and the language of MATLAB R2021a, and the structural vibration results were analyzed in both the time domain and frequency domain. By using different time-step loading for the vehicle–rail–bridge coupling vibration analysis, the computational efficiency can be effectively improved under the condition of guaranteeing the accuracy of the result analysis within 100 Hz. Based on the power flow equilibrium equation, a statistical energy method of calculating the high-frequency noise radiation is theoretically derived. Based on the theoretical basis of the statistical energy method, the high-frequency noise in the structure is numerically simulated in the VAONE 2021 software, and the average contribution of the concrete roof plate to the three acoustic field points constructed in this paper is as high as 50%, which is of great significance in the study of noise reduction in steel–concrete composite girders.

Characteristics and Mechanism of Sound Radiation of Urban Railway Bridge Installed with Sound Barrier

Study on low-frequency noise radiated from steel multi-box girder bridge induced by traffic vibration

Acoustic–vibration characteristics and low–structural–noise optimization design of upright sound barrier for rail transit

The Computing Model of Noise Iinfluence for Elevated Railway in Urban

Assessment on Transient Sound Radiation of a Vibrating Steel Bridge Due to Traffic Loading

Acoustic performance of near-rail low-height noise barriers installed on suburban railway bridges

MEASUREMENT AND ANALYSIS ON NOISE RADIATION OF ELEVATED BRIDGE STRUCTURE UNDER TRANSIT TRAINS

Investigating noise radiation pattern of railway bridges for urban rail transit

Experimental noise and vibration characteristics of elevated urban rail transit considering the effect of track structures and noise barriers

Test and analysis of high-speed trains induced environmental noise and sound barriers

Noise reduction research of high-speed railway U-shaped beam

Study on Structure-Borne Noise Characteristics of Long-Span Steel Truss Bridge in Urban Rail Transit

Analysis of the effect of combined noise reduction measures of trapezoidal sleeper and sound barrier on elevated line

Current Status and Prospects of Application of Sound Barrier for High-Speed Railway in China

A Theoretical Investigation on Characteristic Frequencies of Ground Vibrations Induced by Elevated High Speed Train

Full-scale experiment of transient aerodynamic pressures acting on a bridge noise barrier induced by the passage of high-speed trains operating at 380–420 km/h

Study on Vibration and Noise of Railway Steel–Concrete Composite Box Girder Bridge Considering Vehicle–Bridge Coupling Effect

Dynamic Response Analysis of Sound Barrier Structures under High Speed Train Traveling Condition

Design of Embedded Sound-barrier of Urban Rail Transit and Simulated Research on Its Acoustic Performance

A review on aerodynamic load and dynamic behavior of railway noise barriers when high-speed trains pass

Dynamic response of existing railway bridge sound barrier under train induced impulsive pressure with increased speed to 250km/h