Abstract:Structural Health Monitoring, Ahead of Print. Ultrasonic-guided waves full wavefield scanning technology can realize non-destructive testing with non-contact. The damage detection method based on ultrasonic-guided waves' full wavefield data is widely used in thin-walled plate structures. The defect imaging method based on full wavefield data faces the challenge of simultaneously obtaining the defect contour and thickness direction information. Based on the ultrasonic-guided waves full wavefield scanning detection technology, this paper proposes a multi-time Lamb waves space wavenumber imaging method. In this method, the analytic signal of Lamb wavefield at each moment is constructed by Hilbert transform, and the phase unwrapping is carried out by amplitude sorting and multi-clustering method. Then the wavenumber information is obtained by calculating the phase gradient. The wavenumber at different times of each measurement point is arranged in descending order, and the median wavenumber is extracted as the wavenumber at each measurement point. Based on the dispersion relationship of the tested specimen, the quantitative detection of the plate thickness in the detection area is realized. This method is first applied to the simulation model. Then it is applied to the defect imaging and quantitative detection of aluminum plates with rectangular groove defects and carbon fiber reinforced plastics (CFRP) plates with delamination defects. In simulation and experiment, the local wavenumber imaging method, the frequency domain instantaneous wavenumber imaging method, and the multi-time Lamb waves space wavenumber imaging method are used for defect imaging and quantification. The imaging results are compared and analyzed. The result shows that the multi-time Lamb waves space wavenumber imaging method can restore the morphology of groove defects in aluminum plates and delamination defects in CFRP plates, and accurately estimate the depth of groove defects and the location of delamination defects.

Time‐domain spectra of ultrasonic wave transmitted through granite and gypsum samples containing artificial defects

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Combined acoustic methods in monitoring the crack development in granite

Passive Tomography to Image Stress Redistribution Prior to Failure on Granite

Quantifying the Progressive Fracture Damage of Granite Rocks by Stress–Strain, Acoustic Emission, and Active Ultrasonic Methods

Application of Ultrasonic Computed Tomography (UCT) Technology to Detect Defects in Stone

Geological detection of hard rocks by GPR and signal time-frequency characteristics analysis in urban underground trenchless construction

Experimental and numerical investigation of the fatigue behaviour and crack evolution mechanism of granite under ultra-high-frequency loading

Real-Time Ultrasonic Features and Damage Characterization of Deep Shale

Application of Long-Range Cross-Hole Acoustic Wave Detection Technology in Geotechnical Engineering Detection: Case Studies of Tunnel-Surrounding Rock, Foundation and Subgrade

Study on Spectrum Characteristics and Clustering of Acoustic Emission Signals from Rock Fracture

Study on the Acoustic Emission and Thermal Infrared Signal Characteristics of Granite with Freeze-Thaw Damage in Cycle Loading Process

Time-frequency domain characteristics of intact and cracked red sandstone based on acoustic emission waveforms

Fatigue Damage Mechanism and Deformation Behaviour of Granite Under Ultrahigh-Frequency Cyclic Loading Conditions

Identification of Crack Development in Granite under Triaxial Compression Based on the Acoustic Emission Signal

Nondestructive Testing of Local Microcracking in Laboratory Mineral Samples Using an Acoustic Method with a Laser Source of Ultrasound and Its Verification with X-ray Computed Tomography

Investigation of internal damage evolution in gneiss considering water softening

Nondestructive testing of local microcracking in laboratory mineral samples using an acoustic technique with a laser source of ultrasound and its verification with x-ray computer tomorgaphy

Multi-time Lamb waves space wavenumber imaging method based on ultrasonic-guided wavefield

Investigation into the Failure Characteristics and Mechanism of Rock with Single Elliptical Defects under Ultrasonic Vibrations

Microcrack Growth Properties of Granite under Ultrasonic High-Frequency Excitation