Abstract:Four solid wastes including sludge, watermelon rind, corncob, and eucalyptus and their demineralized samples were selected to conduct pyrolysis experiments under different experimental conditions, including temperature, residence time, carrier gas flow rate, and heating rate, respectively. The co‐pyrolysis experiment was carried out after mixing different types and different ratios of solid wastes to investigate the influence of different factors on yield of char, tar, and gas. A three‐layer artificial neural network (ANN) based on back propagation (BP) algorithm was developed and trained to simulate and predict the yield of products. The experimental conditions and characteristic parameters of samples, including the content of C, H, K, Ca, Mg, Fe, volatile, ash, and fixed carbon, were selected as input parameters while the yields of char, tar, and gas were selected as output parameters. The effect of input parameters including residence time, carrier gas flow rate, heating rate, and the content of metal elements on the network performance was investigated in detail to optimize the ANN model. It was found that the metal element has the greatest influence, and its importance to the yield of each product exceeds 25%. The pyrolysis experimental data of single‐component solid waste were selected as the model training set for model learning and training and then use the trained model to predict the co‐pyrolysis experimental data of multi‐component solid waste. Good agreement was achieved between experimental and predicted results; the correlation coefficient was 0.9836, and the root mean square error (RMSE) was only 2.4273, which revealed that the ANN method can be effectively used in predicting of the gas‐liquid‐solid product distribution after solid waste pyrolysis process.Novelty StatementIn this manuscript, based on the principle of artificial neural network, experimental conditions and sample characteristic parameters are used as input variables to model the distribution of different sample pyrolysis products. The model is used to predict the co‐pyrolysis data, and the influences of input parameters on the accuracy of the model are analyzed. The model values are in good agreement with the experimental data, indicating that the model is a high accurate general model and can be applied to different samples.

Machine Learning Approach for the Prediction of Biomass Waste Pyrolysis Kinetics from Preliminary Analysis

Comparison of Artificial Neural Networks and kinetic inverse modeling to predict biomass pyrolysis behavior

Machine learning based prediction of biomass pyrolysis with detailed reaction kinetics for thermally-thick particles: from 1D to 0D

A machine learning model to predict the pyrolytic kinetics of different types of feedstocks

Application of machine learning methods for lignocellulose biomass pyrolysis: Activation energy prediction from preliminary analysis and conversion degree

Direct Prediction of Steam Cracking Products from Naphtha Bulk Properties: Application of the Two Sub-Networks ANN

A review on biomass thermal-oxidative decomposition data and machine learning prediction of thermal analysis

Interpretable Machine Learning Model for Activation Energy Prediction Based on Biomass Properties

Applied machine learning for prediction of waste plastic pyrolysis towards valuable fuel and chemicals production

Prediction of MSW pyrolysis products based on a deep artificial neural network

Multi-output neural network model for predicting biochar yield and composition

Enhancing pyrolysis process monitoring and prediction for biomass: A machine learning approach

Machine learning prediction of biochar physicochemical properties based on biomass characteristics and pyrolysis conditions

Prediction of gas‐liquid‐solid product distribution after solid waste pyrolysis process based on artificial neural network model

Machine Learning Prediction of Biochar Yield and Carbon Contents in Biochar Based on Biomass Characteristics and Pyrolysis Conditions

EXPERIMENTAL STUDY ON MSW PYROLYSIS AND ITS NEURAL NETWORKS PREDICTION MODEL

Predicting Co-Pyrolysis of Coal and Biomass Using Machine Learning Approaches

Autonomous kinetic modeling of biomass pyrolysis using chemical reaction neural networks

Machine learning applications in biomass pyrolysis: From biorefinery to end-of-life product management

Kinetic and Artificial neural network modelling of marabú (Dichrostachys cinerea) pyrolysis based on thermogravimetric data

Gasification Characteristics of MSW and an ANN Prediction Model