Abstract:The success of a robotic pick and place task depends on the success of the entire procedure: from the grasp planning phase, to the grasp establishment phase, then the lifting and moving phase, and finally the releasing and placing phase. Being able to detect and recover from grasping failures throughout the entire process is therefore a critical requirement for both the robotic manipulator and the gripper, especially when considering the almost inevitable object occlusion by the gripper itself during the robotic pick and place task. With the rapid rising of soft grippers, which rely heavily on their under-actuated body and compliant, open-loop control, less information is available from the gripper for effective overall system control. Tackling on the effectiveness of robotic grasping, this work proposes a hybrid policy by combining visual cues and proprioception of our gripper for the effective failure detection and recovery in grasping, especially using a proprioceptive self-developed soft robotic gripper that is capable of contact sensing. We solved failure handling of robotic pick and place tasks and proposed (1) more accurate pose estimation of a known object by considering the edge-based cost besides the image-based cost; (2) robust object tracking techniques that work even when the object is partially occluded in the system and achieve mean overlap precision up to 80%; (3) contact and contact loss detection between the object and the gripper by analyzing internal pressure signals of our gripper; (4) robust failure handling with the combination of visual cues under partial occlusion and proprioceptive cues from our soft gripper to effectively detect and recover from different accidental grasping failures. The proposed system was experimentally validated with the proprioceptive soft robotic gripper mounted on a collaborative robotic manipulator, and a consumer-grade RGB camera, showing that combining visual cues and proprioception from our soft actuator robotic gripper was effective in improving the detection and recovery from the major grasping failures in different stages for the compliant and robust grasping.

Reliable object handover through tactile force sensing and effort control in the Shadow Robot hand

A Haptic Shared Control Architecture for Tracking of a Moving Object.

A Human-Robot Collaboration System for Object Handover

Compliant Human-Robot Object Transfer Based on Modular 3-Axis Force Sensor for Collaborative Manufacturing.

ContactHandover: Contact-Guided Robot-to-Human Object Handover

Object-Independent Human-to-Robot Handovers Using Real Time Robotic Vision

Robot to Human Object Handover using Vision and Joint Torque Sensor Modalities

An Affordance Sensitive System for Robot to Human Object Handover

Tactile-Driven Gentle Grasping for Human-Robot Collaborative Tasks

Fast and Comfortable Robot-to-Human Handover for Mobile Cooperation Robot System

Towards natural handshakes for social robots: human-aware hand grasps using tactile sensors

In-Hand Object Stabilization by Independent Finger Control

A Study of Human-Robot Handover through Human-Human Object Transfer

Integrating vision, haptics and proprioception into a feedback controller for in-hand manipulation of unknown objects

Adaptive Fingers Coordination for Robust Grasp and In-Hand Manipulation Under Disturbances and Unknown Dynamics

Overcoming the Cognition-Reality Gap in Robot-to-Human Handovers with Anisotropic Variable Force Guidance

Multifingered Robot Hand Compliant Manipulation Based on Vision-Based Demonstration and Adaptive Force Control

Enabling Robot Manipulation of Soft and Rigid Objects with Vision-based Tactile Sensors

Safe Grasping with a Force Controlled Soft Robotic Hand

Task-Agnostic Adaptation for Safe Human-Robot Handover

Failure Handling of Robotic Pick and Place Tasks With Multimodal Cues Under Partial Object Occlusion