Abstract:China has been vigorously promoting the use of prefabricated steel structure buildings (PSSBs) 1 in recent years. However, owing to the deficit in carbon emission (CE) research and the lack of basic CE parameters for PSSB components (PSCs), it is not feasible to conduct reliable CE calculations or develop scientific strategies for CE reduction. Based on the actual situation in China, this study investigated the CE of upstream raw steel sheet production ( CE A1-A3 ), measured the CEs of PSC prefabrication ( CE A3+ ), and obtained a carbon emission factor (CEF) for PSCs in the "cradle-to-gate" stage. The CEF of PSCs was found to be 2175.7 kgCO 2 e/t; CE A1-A3 contributed 1959 kgCO 2 e/t (90.0%), while CE A3+ contributed 216.7 kgCO 2 e/t (10.0%). Previous studies focused almost exclusively on CE A1-A3 , whereas this study systematically investigated the direct, indirect, and embodied CEs for the A3+ stage of PSCs. The sources of CE A3+ were quantified; this showed that the CEs for energy and material consumption accounted for 59.6% and 40.4%, respectively. Compared with CE A1-A3 , the CE types of CE A3+ were more diverse, with indirect CE (52.4%) > embodied CE (38.4%) > direct CE (9.2%). For this reason, CE calculation methods suitable for these characteristics were discussed, mainly based on consumption–production (CP) and process analysis (PA). In the CO 2 gas-shielded welding test, it was found that the CO 2 shielding gas decomposed in large quantities during the welding process, and the degree of decomposition was positively correlated with the welding power; the CP method regarded the CO 2 supply as the direct CE and overestimated the CE A3+ . In this study, the CE parameters of the main prefabrication processes were measured and the corresponding empirical formulas were fitted, which made the PA-based CE calculations feasible. Finally, the temporal and spatial ranges of the results were clarified, and the CEF trends for PSCs were predicted according to the expected CEs for crude steel and power grids in China. The results show that the scrap proportion in the production of raw steel sheets has a major impact on the CEFs of PSCs, whereas low-carbon electricity offers considerable CE reduction potential for PSC prefabrication.

IFC-enabled LCA for carbon assessment in pumped storage hydropower (PSH) with concrete face rockfill dams

Exergoenvironmental Evaluation for Combined Cycle Power Generation System Based on Life Cycle Assessment

Life Cycle Assessment-Based Carbon Footprint Accounting Model and Analysis for Integrated Energy Stations in China

Embodied carbon emissions induced by the construction of hydropower infrastructure in China

Systems Accounting for Carbon Emissions by Hydropower Plant

Study on carbon emissions of a small hydropower plant in Southwest China

Life Cycle Assessment of Closed-Loop Pumped Storage Hydropower in the United States

Holistic LCA evaluation of the carbon footprint of prefabricated concrete stairs

Life-Cycle Assessment of Concrete Dam Construction: Comparison of Environmental Impact of Rock-Filled and Conventional Concrete

Enhancing life cycle assessment for reversible ground-coupled heat pump systems through dynamic analysis

The carbon footprint of large- and mid-scale hydropower in China: Synthesis from five China's largest hydro-project

Case Study on Carbon Footprint Life-Cycle Assessment for Construction Delivery Stage in China

Quantification of Building Embodied Energy in China Using an Input–output-Based Hybrid LCA Model

Calculation and Analysis of Carbon Emissions in the Construction Industry of Zhejiang Province

An Assessment Framework for Analyzing the Embodied Carbon Impacts of Residential Buildings in China

Carbon emissions of prefabricated steel structure components: A case study in China

Process-based evaluation of carbon emissions from the on-site construction of prefabricated steel structures: A case study of a multistory data center in China

Holistic life-cycle accounting of carbon emissions of prefabricated buildings using LCA and BIM

Integrated assessment method for building life cycle environmental and economic performance

Investment Efficiency Assessment Model for Pumped Storage Power Plants Considering Grid Operation Demand under Fuzzy Environment: A Case Study in China

Lifecycle Analysis of Coal-Fired Power Plants with Ccs in China