Abstract:<p>Segregation behavior and capturing mechanism of phosphorus (P) in dual-phase steel were systematically investigated by Atom probe tomography (APT). The dual-phase steel is composed of lath martensite, irregular ferrite and MC-carbide (M = Ti, Mo). The P is mainly dissolved in ferrite and martensite grains, and a small amount of P segregates around MC-carbide. APT analysis confirms that the carbide is a type of (Ti, Mo) C. The MC-carbide has a competitive advantage over the ferrite/martensite interface in capturing P atoms. Therefore, it can be concluded that P segregation around the MC-carbide weakens P enrichment at the ferrite/martensite interface. In the end, it is expected that the MC-carbide significantly reduces the P damage to the mechanical properties of dual-phase steel, especially the impact properties.</p>

What problem does this paper attempt to address?

The paper attempts to address the issue of phosphorus (P) segregation behavior in dual-phase steel and its impact on material properties. Specifically, the researchers systematically studied the distribution and trapping mechanism of phosphorus in dual-phase steel using atom probe tomography (APT), particularly the competitive mechanism of phosphorus between MC carbides (M=Ti, Mo) and ferrite/martensite interfaces. ### Main Issues: 1. **Phosphorus Segregation Behavior in Dual-Phase Steel**: How is phosphorus distributed in dual-phase steel? In which phases is it primarily present? 2. **Phosphorus Trapping Mechanism**: What is the trapping mechanism of phosphorus at different phase interfaces? Specifically, what is the competitive relationship between MC carbides and ferrite/martensite interfaces? 3. **Impact of Phosphorus Segregation on Material Properties**: How does phosphorus segregation affect the mechanical properties of dual-phase steel, especially its impact performance? ### Research Background: - Dual-phase steel is widely used in the automotive industry due to its high strength, good ductility, and relatively low cost. - Phosphorus is a common alloying element, but its segregation at grain boundaries can lead to brittle fracture, affecting material performance. - Previous studies have mainly focused on the processing and heat treatment parameters of dual-phase steel, with less research on phosphorus segregation. ### Research Methods: - Use scanning electron microscopy (SEM) and transmission electron microscopy (TEM) to observe the microstructure and precipitates of dual-phase steel. - Use atom probe tomography (APT) to analyze the distribution of phosphorus at different phase interfaces. ### Main Findings: - Phosphorus mainly dissolves in ferrite and martensite grains, with a small amount of phosphorus enriched around MC carbides. - MC carbides have a competitive advantage in trapping phosphorus atoms, leading to reduced segregation of phosphorus at the ferrite/martensite interface. - This competitive mechanism helps to reduce the negative impact of phosphorus on the mechanical properties of dual-phase steel, especially improving its impact performance. ### Conclusion: - The distribution of phosphorus in dual-phase steel is influenced by the competition between MC carbides and ferrite/martensite interfaces. - MC carbides have an advantage in trapping phosphorus atoms, which can significantly reduce phosphorus segregation at the ferrite/martensite interface, thereby improving the mechanical properties of dual-phase steel, particularly its impact performance.

Competitive mechanism of phosphorus capturing between MC-carbide (M = Ti, Mo) and ferrite/martensite interface in dual-phase steel

Influencing mechanism of phosphorous on intragranular M23C6 of a Ni-base superalloy studied by atom probe tomography

Revealing carbide precipitation effects and their mechanisms during quenching-partitioning-tempering of a high carbon steel: Experiments and Modeling

Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation

Atomistic investigation of the mechanical and tribological responses of the ferrite-cementite interface with a Bagaryatskii orientation

Equilibrium segregation of phosphorus at grain boundaries of Fe–P, Fe–C–P, Fe–Cr–P, and Fe–Cr–C–P alloys

Interaction of Phosphorus, Carbon, Manganese, and Chromium in Intergranular Embrittlement of Iron

Transformation behavior of primary MC and M 2 C carbides in Cr4Mo4V steel

The existence and strengthening mechanism of phosphorus in Ni17Cr15Fe-based alloys

Phase-field analysis of quenching and partitioning in a polycrystalline Fe-C system under constrained-carbon equilibrium condition

Athermally induced MC carbide decomposition in gradient M50 bearing steels during electric pulse treatments

Carbide Precipitation Behavior of High‐Alloy Steel During Solidification and Cooling Process

Effect of grain orientation and interface coherency on the hydrogen trapping ability of TiC precipitates in a ferritic steel

Uncovering the isothermal transformation dynamics and elemental diffusion behavior of reversed austenite in PH13-8Mo steel

Effect of Cu addition on the precipitation behavior of M2C carbides in maraging steel

Engineering metal-carbide hydrogen traps in steels

Phosphorus as sintering activator in powder metallurgical steels: characterization of the distribution and its technological impact

Co-precipitation mechanism of Cu-rich phase and κ-carbide precipitates in Fe-28Mn-10Al-1C-3Cu austenitic low-density steel

Effect of Phosphorus on the Microstructure and Mechanical Properties of Strip Cast Carbon Steel

The Preparation Process, Microstructure and Properties of Cellular TiC-High Mn Steel-Bonded Carbide

Characterization of Carbide Precipitation in Low-Carbon Martensitic Steels Using an Ultrawide Field-of-View 3D Atom Probe