Abstract:Because of the multi-layer structure and the diversified connection modes of most battery modules, systematically investigating the thermal failure propagation principles and mechanisms of lithium-ion batteries is critical to provide early warnings and protection for thermal runaway. In this work, a series of experimental studies and mathematical deductions were conducted to investigate the propagation behavior of thermal failures within two types of cells under various heating modes, and their heat transfer mechanisms were analyzed. In general, the thermal runaway phenomenon in Li (Ni1/3Co1/3Mn1/3)O-2 cells is more severe than that in LiCoO2 cells. For different heating modes, lengthwise thermal failure propagation is more unlikely to occur in comparison with transversal thermal failure propagation; however, the former involves a more violent combustion. For different heating positions, heating near the positive pole results in the most violent phenomena. Additionally, a higher T-max of 185.6 degrees C was obtained via middle heating in comparison with that obtained via heating on the poles. The temperature rising rate also varied, taking 1619, 1578, and 1699 s for the temperature to rise from 20 degrees C to 168.9 degrees C, 185.6 degrees C, and 173.4 degrees C through bottom, middle, and top heating, respectively. These phenomena were consequently ascribed to the different heat transfer rates along different directions inside the cells, including transversal/lengthwise propagation, and positive-pole-directional/negative-pole-directional propagation. These encouraging results may raise concerns about developing more precise and suitable surveillance and control measures to further enhance the thermal safety performance of cells/modules from both external and internal perspectives.

An experimental analysis on thermal runaway and its propagation in Cell-to-Pack lithium-ion batteries

Numerical Study on the Use of Emergency Cooling During the Process of Lithium-Ion Battery Thermal Runaway

Experimental and simulation investigation of thermal runaway propagation in lithium-ion battery pack systems

Thermal runaway propagation behavior of the Cell-to-Pack battery system

Modeling the Propagation of Internal Thermal Runaway in Lithium-Ion Battery

Experimental Analysis of Thermal Runaway Propagation Risk Within 18650 Lithium-Ion Battery Modules

A Detailed Finite Element Model of Internal Short Circuit and Venting During Thermal Runaway in a 32650 Lithium-Ion Battery

Role of Heat Release from Inter-Electrode Chemical Crosstalk in Thermal Runaway Propagation Characteristics of Lithium-Ion Battery Modules

Investigating the Thermal Runaway Mechanisms of Lithium-Ion Batteries Based on Thermal Analysis Database

Effect of thermal impact on the onset and propagation of thermal runaway over cylindrical Li-ion batteries

Thermal Runaway Propagation within Lithium-Ion Battery Packs: Modes and Mechanisms

Dynamic thermophysical modeling of thermal runaway propagation and parametric sensitivity analysis for large format lithium-ion battery modules

Investigation of propagation of thermal runaway during large-scale storage and transportation of Li-ion batteries

Thermal Runaway Front Propagation Characteristics, Modeling and Judging Criteria for Multi-Jelly Roll Prismatic Lithium-Ion Battery Applications

Experimental and Modeling Study on Thermal Runaway of Battery System Considering Gas Eruption

Heating power and heating energy effect on the thermal runaway propagation characteristics of lithium-ion battery module: Experiments and modeling

Analysis of thermal runaway propagation characteristics of lithium-ion battery module under local high temperature

Thermal runaway front in failure propagation of long-shape lithium-ion battery

Model and Experiments to Investigate Thermal Runaway Characterization of Lithium-Ion Batteries Induced by External Heating Method

Comparative Study on the Transversal/lengthwise Thermal Failure Propagation and Heating Position Effect of Lithium-Ion Batteries

Numerical Analysis of Heat Transfer Mechanism of Thermal Runaway Propagation for Cylindrical Lithium-ion Cells in Battery Module