Abstract:It is known that the reaction rate of the thermal decomposition of polymer-bonded explosives exposed to cook-off has a certain relation with temperature, confining pressure and some other factors, which were verified by many experiments. Temperature-dominated thermal-decomposition models were developed for various high explosives and applied to study their decomposition process, such as HMX- and TATB-based polymer-bonded explosives. These models have reasonable accuracy. For example, the multistep thermal-decomposition model of PBX 9501 (which consists of 95% HMX, 2.5% Estane and 2.5% BDNPA/F) proposed by Tarver considers decomposition of both HMX and polymer binders. The temperature-dominated thermal-decomposition model only applies to preignition thermal decomposition. After ignition occurs, the dominant mechanism of the reaction transforms to deflagration and subsequent explosion, where the effect of pressure can no longer be neglected. Furthermore, the time scale of deflagration and explosion (millisecond or microsecond) differs significantly from the time scale of slow thermal decomposition (hours or minutes). The numerical model of postignition phenomenon (deflagration and final explosion) is still under investigation and is far from maturity. The predicted violence scale resulting from thermal explosion does not agree with experiment very well. An alternative method is to conduct a thermal–mechanical analysis for preignition stage, which takes advantage of a developed temperature-dominated thermal-decomposition model, and to analyze the stress caused by quasi-static thermal expansion. Herein, a thermal–mechanical analysis is implemented for a one-dimensional time-to-explosion experiment (ODTX) and a scaled thermal explosion experiment (STEX) with HMX-based polymer-bonded explosives inside using the finite element method. Then, the finite element model is applied to investigate the thermal decomposition of PBX 9501 inside an explosive device exposed to cook-off. The regions that have maximum temperature, maximum hydrostatic pressure and maximum von Mises stress are identified based on simulation results, which can benefit future improvement of the explosive device.

An analytical method for overlapping of the melting and decomposition of 2-oximemalononitrile

The Non-isothermal Kinetic Analysis of Thermal Decomposition of Mg(OH)2

Investigation of the Thermal Decomposition Mechanism and Thermal Hazards of Hydroxylamine Aqueous Solution Utilizing Combined Calorimetric Methods and DFT Calculations

Investigative calorimetric studies and kinetic parameters estimation using analytical methods for self-reactive hazardous chemicals in a chemical manufacturing plant

Numerical study of countermeasure against thermal stimuli for HMX-based polymer-bonded explosives

Thermal Hazard Analysis and Decomposition Mechanism of Energetic Nitration of 4-Methoxy-2-nitroacetanilide

Reaction mechanism and kinetic modeling of gas-phase thermal decomposition of prototype nitramine compound HMX

Thermal Behaviors and Decomposition Mechanism of PNIMMO with CL-20

Reactive molecular dynamics simulation of thermal decomposition for nitromethane/nano-aluminum composites

Multi-aspect and comprehensive atomic insight: the whole process of thermolysis of HMX/Poly-NIMMO-based plastic bonded explosive

Thermal hazards of benzaldehyde oxime: Based on decomposition products and kinetics analysis by adiabatic calorimeter

New Method for Kinetic Analysis of Decomposition of Biomass Materials—based on Critical Analysis of Moll Method

Experimental and Numerical Simulation Study on Thermal Decomposition Model of Ammonium Nitrate

Calorimetric studies on the thermal hazard of methyl ethyl ketone peroxide with incompatible substances

A green approach towards adoption of chemical reaction model on 2,5-dimethyl-2,5-di-(tert-butylperoxy)hexane decomposition by differential isoconversional kinetic analysis

Temperature-dependent decomposition of the CL-20/MTNP cocrystal after phase separation

Multi-aspect simulation insight on thermolysis mechanism and interaction of NTO/HMX-based plastic-bonded explosives: a new conception of the mixed explosive model

Mechanistic Investigation on the Initial Thermal Decomposition of Energetic Materials FOX-7 and RDX in the Crystal and Gas Phase: An MM/DFT-Based ONIOM Calculation.

Thermal–mechanical analysis for confined HMX-based polymer-bonded explosives

Reactive molecular dynamics simulations on thermal decomposition of 3-methyl-2,6-dinitrophenol

Non-isothermal Decomposition Reaction Kinetics of the Magnesium Oxalate Dihydrate