Abstract:The current research of the global chassis control problem for the full drive-by-wire vehicle focuses on the control allocation (CA) of the four-wheel-distributed traction/braking/steering systems. However, the path following performance and the handling stability of the vehicle can be enhanced a step further by automatically adjusting the vehicle speed to the optimal value. The optimal solution for the combined longitudinal and lateral motion control (MC) problem is given. First, a new variable step-size spatial transformation method is proposed and utilized in the prediction model to derive the dynamics of the vehicle with respect to the road, such that the tracking errors can be explicitly obtained over the prediction horizon at varying speeds. Second, a nonlinear model predictive control (NMPC) algorithm is introduced to handle the nonlinear coupling between any two directions of the vehicular planar motion and computes the sequence of the optimal motion states for following the desired path. Third, a hierarchical control structure is proposed to separate the motion controller into a NMPC based path planner and a terminal sliding mode control (TSMC) based path follower. As revealed through off-line simulations, the hierarchical methodology brings nearly 1700% improvement in computational efficiency without loss of control performance. Finally, the control algorithm is verified through a hardware in-the-loop simulation system. Double-lane-change (DLC) test results show that by using the optimal predictive controller, the root-mean-square (RMS) values of the lateral deviations and the orientation errors can be reduced by 41% and 30%, respectively, comparing to those by the optimal preview acceleration (OPA) driver model with the non-preview speed-tracking method. Additionally, the average vehicle speed is increased by 0.26 km/h with the peak sideslip angle suppressed to 1.9°. This research proposes a novel motion controller, which provides the full drive-by-wire vehicle with better lane-keeping and collision-avoidance capabilities during autonomous driving.

Research on Path Tracking Control Based on Optimal Look-Ahead Points

Nonlinear Model Predictive Path Tracking Control for Autonomous Vehicles Based on Orthogonal Collocation Method

Predictive Control Method of Autonomous Vehicle Based on Tracking-error Model

Steering Wheel AGV Path Tracking Control Based on Improved Pure Pursuit Model

Adaptive Learning-Based Path-Tracking Control for Unknown Vehicle Systems under Performance Optimization

Path Tracking of Autonomous Vehicle Based on Adaptive Preview Trajectory Planning with the Consideration of Vehicle Stability

An adaptive path tracking controller for autonomous vehicles based on the Pure Pursuit algorithm

An Adaptive-PID Path Tracking Algorithm Based on High Accuracy Driving Map for an Autonomous Vehicle

Research on AGV steering control algorithm based on improving pure tracking model

Optimal Lateral Path-Tracking Control of Vehicles with Partial Unknown Dynamics Via DPG-Based Reinforcement Learning Methods

MPC-based Path Tracking Control with Forward Compensation for Autonomous Driving

Design, Analysis, and Experiments of Preview Path Tracking Control for Autonomous Vehicles.

Research on parallel parking path planning and tracking control of unmanned vehicles

Preview Path Tracking Control with Delay Compensation for Autonomous Vehicles

A Model Predictive Control with Preview-Follower Theory Algorithm for Trajectory Tracking Control in Autonomous Vehicles

Research on Path Tracking Control for Vision Based Intelligent Vehicle

Visual Path Tracking Control for Park Scene

Fuzzy PD Controller Based Path Tracking for Autonomous Vehicle under i-VICS

Event-triggered model predictive-preview control strategy for trajectory tracking of autonomous vehicle

Optimal Predictive Control for Path Following of a Full Drive-by-Wire Vehicle at Varying Speeds

Proximally Optimal Predictive Control Algorithm for Path Tracking of Self-Driving Cars