Abstract:Zirconium alloys have been widely used because of their good mechanical properties, corrosion resistance, and suitable neutron absorption cross section. However, with the development of engineering technology, the requirements on the service performance, safety, and microstructure stability of zirconium structural materials are increasingly high. Creep refers to the phenomenon where the strain of the material increases with time under the action of stress lower than the yield strength, which will lead to the deformation of the structural material and eventually its failure. It is also an important problem faced by zirconium cladding materials in nuclear reactors. Nanocrystalline zirconium is a strengthening and toughening method, which may also improve other properties of nuclear materials. However, there are very few investigations on the microscopic creep mechanism in the atomic scale of nanocrystalline zirconium. Improving the creep resistance of zirconium materials plays an important role in the safety of components. Therefore, studying the creep behavior of nanocrystalline zirconium and its atomic mechanism is conducive to its better application in industries. In this study, the tensile creep behavior of nanocrystalline alpha-Zr under different conditions was investigated via molecular dynamics simulation. The main influencing factors of the creep process were analyzed and the influence of polycrystalline structure evolution and deformation mechanism during the steady-state creep process was studied. The effect of irradiation on the creep process was preliminarily explored. Results showed that temperature, stress, irradiation, and grain size affect the creep behavior of nanocrystalline alpha-Zr. Increasing the temperature and stress level and refining the grains can promote the creep process. The microstructure of the system changed significantly after the creep. Some grains grew up with the creep deformation process, while others gradually shrank, or even disappeared. During deformation, the lattice distortion gradually propagated from the grain boundary to the grains, partly reducing the degree of the hcp order. Simulation results showed that grain boundary migration is the main deformation mechanism of nanocrystalline alpha-Zr during steady-state creep. Increasing the temperature and stress level will thicken the grain boundary and promote the microstructure evolution. After the cascade collision due to neutrons of different energy levels, a large number of point defects were produced in the system and their diffusion contributed to the creep; these defects were finally collected at the grain boundary, improving the grain boundary mobility. Increasing the irradiation energy can increase the number and size of irradiation defects, promoting the creep process of the nanocrystalline system.

Atomic insight in the influence of temperature, stress and grain size on behavior of nano-polycrystalline niobium

Molecular dynamics study on the grain size, temperature, and stress dependence of creep behavior in nanocrystalline nickel

New Insights of the Microcrack Initiation Induced by Mo Addition in Ni-based Single Crystal Superalloys During Creep at 900 °C

Molecular Dynamics Simulation of Creep Mechanism in Nanocrystalline α-Zirconium Under Various Conditions

Molecular Dynamics Simulation of High-Temperature Creep Behavior of Nickel Polycrystalline Nanopillars

Investigation of reorganization of a nanocrystalline grain boundary network during biaxial creep deformation of nanocrystalline Ni using molecular dynamics simulation

Creep Behavior and Deformation Mechanism of a Third-Generation Single Crystal Ni-Based Superalloy at 980 °C

Microstructural Evolution and Its Influence on Creep and Stress Relaxation in Nanocrystalline Ni

Investigation on the effect of temperature, pressure and grain size on the creep behavior of nickel-chromium binary alloy through molecular dynamics simulation

Atomistic Simulations of High-Temperature Creep in Nanotwinned TiAl Alloys

Impacts of different designed microstructures on creep performance of a Ni-based wrought superalloy

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Effect of temperature on the creep properties of polycrystalline Cu-Ni alloy: insight from molecular dynamics simulation

Microstructure Evolution and Dislocation Mechanism of a Third-Generation Single-Crystal Ni-Based Superalloy during Creep at 1170 °C

Atomic-scale investigation of creep behavior in nanocrystalline Mg and Mg-Y alloys

Atomistic Study on High Temperature Creep of Nanocrystalline 316L Austenitic Stainless Steels

Effects of Strain Rate, Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Influence of composition and precipitation evolution on damage at grain boundaries in a crept polycrystalline Ni-based superalloy

Room temperature creep behavior of a single crystal nickel-based alloys

Competitive deformation induced by TCP precipitation and creep inconsistency on dendritic structures in a nickel-based single crystal superalloy crept at high temperatures

Implication of site-specific segregation on grain boundary structural transition and deformation response in nanocrystalline Ni-Nb alloy