Abstract:Solar energy utilization will play an increasingly important role in sustainable urban development because it will help motivate low-carbon development. This study proposed a framework that calculates the solar irradiance on roofs and facades of city-scale buildings, as well as the potential reductions in energy consumption and CO2 emissions that can be derived from solar energy utilization. This framework consolidates data acquired using 3D remote sensing techniques (e.g., light detection and ranging (LiDAR) data and digital photogrammetry) with existing 3D building vector models from urban planning and building design. To further the economical use of solar energy, the framework provides a new strategy based on three aspects (threshold, structure, and orientation), for a more realistic analysis of the available area of roofs and facades, by combining street view images and point clouds. Nanjing, China, was selected as a study area for validating and analyzing the proposed framework. The experimental area covers approximately 30 km(2) and 5216 buildings. The reliability of the proposed method was validated by comparing the results with the computation modules of mainstream commercial programs and previous international studies. The following conclusions were drawn from the experimental area. (1) Annual solar energy on the roofs of all buildings was 9647.89 GWh, corresponding to a PV yield of 1447.18 GWh, which equates to reductions of 584.66 kt in standard coal consumption and 1261.94 kt in CO2 emissions. The annual solar energy on the facades was 5364.63 GWh, corresponding to a PV yield of 804.69 GWh, which equates to reductions of 325.10 kt in standard coal consumption and 701.69 kt in CO2 emissions. (2) Based on the calculated potential solar energy utilization of the building envelopes, it was shown that the utilization of solar radiation on roofs and facades would promote low-carbon urban development. The utilization of solar energy on the facades of high buildings will contribute to the supply of energy for these buildings and help balance their energy consumption. (3) As the solar incidence angle changes over time, the reductions in energy consumption and CO2 emissions related to PV power generation are maximal in summer for building roofs, whereas no significant seasonal differences were observed for facades. (4) Incorporating the available area translates the utilization of solar energy and potential CO2 reductions from theory to practical application by reducing inefficient and invalid areas. The percentages of available area of roof and facade were estimated at 47% and 16% by comprehensive calculations considering three aspects (threshold, structure, and orientation). The corresponding potential of solar energy on the roofs and facades in the validation area B are 167.18 GWh and 53.63 GWh, respectively, compared to the original theoretic values of 316.97 GWh and 237.98 GWh.

A method of calculating urban-scale solar potential by evaluating and quantifying the relationship between urban block typology and occlusion coefficient: A case study of Wuhan in Central China

An Estimation of the Available Spatial Intensity of Solar Energy in Urban Blocks in Wuhan, China

Evaluation for block-scale solar energy potential of industrial block and optimization of application strategies: A case study of Wuhan, China

A morphology-based evaluation on block-scale solar potential for residential area in central China

Solar Energy Utilization Potential in Urban Residential Blocks: A Case Study of Wuhan, China

Impact of Urban Form on Building Energy Consumption in Different Climate Zones of China

Energy Utilization and Carbon Reduction Potential of Solar Energy in Residential Blocks: A Case Study on a Tropical High-Density City in China

An Urban-Scale Method for Building Roofs Available Wind Resourceevaluation Based on Aerodynamic Parameters of Urban Sublayer Surfaces

Deep learning method for evaluating photovoltaic potential of urban land-use: A case study of Wuhan, China

Estimating Roof Solar Energy Potential in the Downtown Area Using A Gpu-Accelerated Solar Radiation Model and Airborne Lidar Data

Influence of urban morphological factors on building energy consumption combined with photovoltaic potential: A case study of residential blocks in central China

Solar Energy Potential of Urban Buildings in 10 Cities of China

Assessing the potential and utilization of solar energy at the building-scale in Shanghai

City-scale solar PV potential estimation on 3D buildings using multi-source RS data: A case study in Wuhan, China

RETRACTED: Calculating Potential of Solar Energy and CO2 Emissions Reduction for Cityscale Buildings Based on 3D Remote Sensing Technologies

Impact of urban form on building energy consumption and solar energy potential: A case study of residential blocks in Jianhu, China

Solar Energy Potential Using Gis-Based Urban Residential Environmental Data: A Case Study of Shenzhen, China

Evaluation of solar energy potential for residential buildings in urban environments based on a parametric approach

Impact of Urban Form at the Block Scale on Renewable Energy Application and Building Energy Efficiency

Integrated physical approach to assessing urban-scale building photovoltaic potential at high spatiotemporal resolution