Abstract:The pseudocapacitive materials, like spinel NiCo2O4 (NCO), that use Faradaic reactions to store charge have been widespread paid attention for supercapacitors application. So, it is a basic fundamental guideline that the preparation of higher-performance pseudocapacitive materials depends on achieving and accelerating more Faradaic reactions in the aspect of electrodes. In this work, based on the mentioned principle, we report a facile method that could significantly promote the capacity of NiCo2O4 nanoelectrode through annealing precursor nanowires (NWs) in different volume ratios of N-2 and O-2 condition. The pristine NCO (V-N2: V-O2 = 0: 1) only exhibited inferior performance with a specific capacitance of 0.88 F cm(-2) (338.5 F g(-1) at 2mA cm(-2)) and capacitive retention of 54% from 2 to 30mA cm(-2). While, for a comparison, the highest comprehensive performance of NCO-9 (V-N2: V-O2 = 9: 1) electrodes delivered superior specific capacitance of 3.8 F cm(-2) (1461 F g(-1) at 2mA cm(-2)), excellent rate retention of 77% and good cycling stability. These boosted pseudocapacitive properties both in capacity and rate capability are attributed to the severe oxygen vacancy defects introduced in nitrided NCO NWs. The involving richness-enabled oxygen defects significantly enhance the electron/ions transportation, and then efficiently alter the well-known capacitive surfacial reaction into bulk pattern in the charge-discharge cycles. This dramatically increased electron/ions kinetics and electrochemical cites for Faradaic reactions. These results provide a deep insight into correlating oxygen vacancies induced structural and chemical evolution on enhanced capacitive performances of redox-active-NiCo2O4 materials. (C) 2018 Elsevier Ltd. All rights reserved.

High Electrochemical Performance of Bi2WO6/Carbon Nano-Onion Composites as Electrode Materials for Pseudocapacitors

High Pseudocapacitive Performance of MnO2 Nanowires on Recyclable Electrodes

Probing the electrochemical capacitance of MXene nanosheets for high-performance pseudocapacitors.

Ni–Co Sulfide Nanoboxes with Tunable Compositions for High-Performance Electrochemical Pseudocapacitors

Highly Conductive NiCo2S4 Urchin-Like Nanostructures for High-Rate Pseudocapacitors

One-Pot Synthesis Of Porous Nickel Cobalt Sulphides: Tuning The Composition For Superior Pseudocapacitance

Tungsten disulfide nanoparticles embedded in gelatin-derived honeycomb-like nitrogen-doped carbon networks with reinforced electrochemical pseudocapacitance performance

Efficient Utilization of Oxygen-Vacancies-enabled NiCo2O4 Electrode for High-Performance Asymmetric Supercapacitor

3D nitrogen-doped graphene/Co(OH)2-nanoplate composites for high-performance electrochemical pseudocapacitors

Pseudocapacitive Behavior Of Nickel Oxide/Carbon Nanotubes Composite Prepared By Cathodic Deposition

High pseudocapacitance electrode enabled by heterovalent doping and surface coating for rapid charge storage

Co3O4/carbon Nano-Onions Composite As Supercapacitor Electrode and Its Excellent Electrochemical Performance

Nickel–Cobalt Hydroxide Microspheres Electrodepositioned on Nickel Cobaltite Nanowires Grown on Ni Foam for High-Performance Pseudocapacitors

Carboxylated multi-walled carbon nanotube/polyaniline composites for high-performance supercapacitor electrodes

Nanocomposites of Ni(Oh)2/Reduced Graphene Oxides with Controllable Composition, Size, and Morphology: Performance Variations As Pseudocapacitor Electrodes

Design of mesoporous Ni-Co hydroxides nanosheets stabilized by BO2- for pseudocapacitors with superior performance

Polyaniline nanowires aligned on MOFs-derived nanoporous carbon as high-performance electrodes for supercapacitor

Synthesis and performances of a ZnCo2O4@MnMoO4 composite for a hybrid supercapacitor

In Situ Form Core-Shell Carbon Nanotube-Imide COF Composite for High Performance Negative Electrode of Pseudocapacitor

Approaching high-performance electrode materials of ZnCo2S4 nanoparticle wrapped carbon nanotubes for supercapacitors

High-performance electrode material synthesis via wet-chemical method: a study on NbN–Fe2O3 composite