Abstract:Scale-up in droplet microfluidics achieved by increasing the number of devices running in parallel or increasing the droplet makers in the same device can compromise the narrow droplet-size distribution, or requires high fabrication cost, when glass- or polymer-based microdevices are used. This paper reports a novel way using parallelization of needle-based microfluidic systems to form highly monodispersed droplets with enhanced production rates yet in cost-effective way, even when forming higher order emulsions with complex inner structure. Parallelization of multiple needle-based devices could be realized by applying commercially available two-way connecters and 3D-printed four-way connectors. The production rates of droplets could be enhanced around fourfold (over 660 droplets/min) to eightfold (over 1300 droplets/min) by two-way connecters and four-way connectors, respectively, for the production of the same kind of droplets than a single droplet maker (160 droplets/min). Additionally, parallelization of four-needle sets with each needle specification ranging from 34G to 20G allows for simultaneous generation of four groups of PDMS microdroplets with each group having distinct size yet high monodispersity (CV < 3%). Up to six cores can be encapsulated in double emulsion using two parallelly connected devices via tuning the capillary number of middle phase in a range of 1.31 × 10-4 to 4.64 × 10-4 . This study leads to enhanced production yields of droplets and enables the formation of groups of droplets simultaneously to meet extensive needs of biomedical and environmental applications, such as microcapsules with variable dosages for drug delivery or drug screening, or microcapsules with wide range of absorbent loadings for water treatment.

Fabrication of Size‐Coded Amphiphilic Particles with a Configurable 3D‐Printed Microfluidic Device for the Formation of Particle‐Templated Droplets

Tunable picoliter-scale dropicle formation using amphiphilic microparticles with patterned hydrophilic patches

Scalable Droplet Generator Design Using Parallel-Arranged Capillaries with Axial Misalignment

Fabrication of Crescent Shaped Microparticles for Particle Templated Droplet Formation

Picoliter Droplet Generation and Dense Bead-in-Droplet Encapsulation via Microfluidic Devices Fabricated via 3D Printed Molds

A 3D printed size-tunable flow-focusing droplet microdevice to produce cell-laden hydrogel microspheres

A Versatile Microchannel Array Device for Portable and Parallel Droplet Generation

Scalable Production of Monodisperse Functional Microspheres by Multilayer Parallelization of High Aspect Ratio Microfluidic Channels

Microfluidic formation of highly monodispersed multiple cored droplets using needle-based system in parallel mode

Droplet generation in cross-flow for cost-effective 3D-printed “plug-and-play” microfluidic devices

Highly Parallel Droplet Dispensing Approach to Provide Homogeneous and Controllable Droplet Arrays for Diagnostic Test Manufacturing

Fabrication of monodisperse, large-sized, functional biopolymeric microspheres using a low-cost and facile microfluidic device

Numerical simulation and analysis of droplet formation within an amphiphilic particle

Controllable Synthesis of Multicompartmental Particles Using 3D Microfluidics.

A 3D-Printed Standardized Modular Microfluidic System for Droplet Generation

A home-made pipette droplet microfluidics rapid prototyping and training kit for digital PCR, microorganism/cell encapsulation and controlled microgel synthesis

Synthesis of Bio-Functionalized Copolymer Particles in 3D Microfluidic Devices

Rapid prototyping of a polymer MEMS droplet dispenser by laser-assisted 3D printing

Fabrication of 3D printed modular microfluidic system for generating and manipulating complex emulsion droplets

Droplet Microfluidics for Fabrication of Non-Spherical Particles

An Injection-Mold Based Method with a Nested Device for Microdroplet Generation by Centrifugation