Abstract:Along with the exponentially increasing quantity of intelligent terminals connected to the Internet, the spectrum competition among users becomes more and more severe in wireless networks. The network have not the ability to satisfy all communication requirements due to the significantly increasing users and demanded rates. Energy-aware admission control has been proved to be an efficient way to tackle the infeasibility caused by the severe spectrum competition among users. However, the traditional admission control is limited by gradually removing chosen users, and pays less attention to the fairness. In this article, we elaborate the concept of the fairness in a max-min optimization problem with respect to the transmission rates, by leveraging the model of bit error rates with $Q$<math>Q</math>-function for general fading communications. Then, we make use of the max-min rate fairness to smartly determine the subset of users to be admitted in wireless networks. Meanwhile, the overall energy consumption is minimized and the network fairness is guaranteed. In particular, the algorithms can tackle more than one user at each iteration. Numerical evaluations show the effectiveness of the algorithms.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the impact of the selection of Transformer Winding Architectures (TWAs) on system performance in high - voltage capacitor charging and discharging applications. Specifically, the paper focuses on how to select the optimal transformer winding architecture by analyzing and calculating the parasitic parameters of the transformer (such as leakage inductance \(L_{\text{lk}}\), self - capacitance \(C_s\) and AC resistance \(R_{\text{AC}}\)) to reduce the losses caused by these parasitic parameters and improve the energy efficiency of the system.
### Background and Problem Description
In high - voltage drivers (such as drivers for driving Dielectric Electro Active Polymer (DEAP) actuators), the Flyback Converter is a commonly used topology. The key component of this converter is the transformer, especially the design of its winding architecture. However, the parasitic parameters of the transformer, such as leakage inductance, self - capacitance and AC resistance, can significantly affect the performance of the system, for example, increasing switching losses and generating Electromagnetic Interference (EMI).
### Research Objectives
The main objectives of the paper are:
1. **Provide Analytical Expressions**: Develop analytical expressions for calculating leakage inductance, self - capacitance and AC resistance under different transformer winding architectures.
2. **Experimental Verification**: Verify the accuracy of these analytical expressions through experiments and Finite Element Analysis (FEA).
3. **Select the Optimal Winding Architecture**: Based on the calculation and experimental results, select the transformer winding architecture that performs best in specific applications.
### Specific Research Contents
- **Winding Architecture Types**: The paper studies four common winding architectures (Type A, Type B, Type C and Type D), as well as multiple winding arrangements (such as S/P, S/P/S, etc.).
- **Parameter Calculation**: Provide detailed calculation methods and formulas for calculating self - capacitance, leakage inductance and AC resistance under different winding architectures.
- **Experiment and Simulation**: Use Ansoft Maxwell software for finite - element simulation and verify the calculation results through experimental measurements.
- **Performance Evaluation**: Analyze the losses of different winding architectures to determine the winding architecture that performs best in high - voltage bidirectional flyback converters.
### Conclusions
Through the above research, the paper draws the following conclusions:
- Different winding architectures have a significant impact on the parasitic parameters of the transformer.
- Through reasonable winding design, leakage inductance, self - capacitance and AC resistance can be significantly reduced, thereby improving the energy efficiency and reliability of the system.
- In specific applications (such as high - voltage DEAP actuator driving), some winding architectures (such as interleaved windings) show better performance.
In general, through detailed theoretical analysis and experimental verification, this paper provides important guidance for transformer design in high - voltage capacitor charging and discharging applications.