Abstract:Mapping structural discontinuities in subsurface environments is critical for several engineering applications. Most instances require stable rock mass to ensure safety while some require an unstable rock mass, such as in block-cave mining, for gravity induced smooth and continuous production of ore. Structural discontinuities have previously been mapped using manual, semi-automated and automated methods which have limitations in terms of required effort, processing time, definition of parameters and accuracy. Most of the semi-automated and automated approaches employ point cloud data, obtained either through structure from motion photogrammetry or laser scanner, and rely on point normal vectors in some form for discontinuity characterisation. Such methods can lead to inaccurate results in the presence of noise as normal vectors tend to show high variability in a local region. This study proposes a new automated algorithm that uses the spatial distribution of points on discontinuities to capture unique signatures in the form of a sinusoidal wave. Each discontinuity points are distinguished by unique amplitude and phase, achieved using fast Fourier transform (FFT), for characterisation in a 3-dimensional (3D) point cloud. The presented amplitude and phase decomposition (APD) approach requires minimal pre-processing and can be applied directly to a raw point cloud as filtering is inherently included in the signal processing. The method has been evaluated on an underground tunnel dataset, consisting of exposed structural discontinuity planes. The efficacy of the developed approach was tested against open-source semi-automated software (discontinuity set extractor), proprietary semi-automated software (Maptek PointStudio), manual segmentation using virtual compass plugin in open-source software (Cloud Compare), and other automated algorithmic approach based on point normal clustering and region growing. When compared against the manual discontinuity segmentation, the APD approach indicated the least error in estimating mean discontinuity dip angle and dip direction which was ±1.15° and ±1.39 with a dispersion error of ±2.24° and ±1.54°, respectively.

Rock Mass Structure Characterization Considering Finite and Folded Discontinuities: A Parametric Study

Modeling Rock Failure Using the Numerical Manifold Method Followed by the Discontinuous Deformation Analysis

Numerical Method to Determine Mechanical Parameters of Engineering Design in Rock Masses

A Comprehensive Dissimilarity Method of Modeling Accuracy Evaluation for Discontinuity Disc Models Based on the Sampling Window

Determination of discontinuity persistent ratio by Monte-Carlo simulation and dynamic programming

Stability Analysis of Jointed Rock Mass in Large Underground Caverns Based on Multi-Scale Analysis Method

A Discrete Fracture Network Approach to Rock Mass Classification

An unsupervised method for rock discontinuities rapid characterization from 3D point clouds under noise

Integration of Automatic Discontinuity Identification and Multi-Scale Hierarchical Modeling for Stability Analysis of Highly-Jointed Rock Slopes

A Rough Discrete Fracture Network Model for Geometrical Modeling of Jointed Rock Masses and the Anisotropic Behaviour

Characterization of a jointed rock mass based on fractal geometry theory

On the role of pre-existing discontinuities on the micromechanical behavior of confined rock samples: a numerical study

A Machine Learning Approach to Extract Rock Mass Discontinuity Orientation and Spacing, from Laser Scanner Point Clouds

Automated rock mass discontinuity set characterisation using amplitude and phase decomposition

Control of structural damage on the rock mass characteristics and its influence on the rock slope stability along National Highway-07, Garhwal Himalaya, India: an ensemble of discrete fracture network (DFN) and distinct element method (DEM)

Simulation of the Nonlinear Mechanical Behaviors of Jointed Rock Masses Based on the Improved Discontinuous Deformation and Displacement Method

Study on Discrete Fracture Network Model and Rock Mass Quality Evaluation of Tunnel Surrounding Rock

Characterization of discontinuity surface morphology based on 3D fractal dimension by integrating laser scanning with ArcGIS

Size effect on triaxial strength of randomly fractured rock mass with discrete fracture network

Generation and Verification of Three-Dimensional Network of Fractured Rock Masses Stochastic Discontinuities Based on Digitalization

Extraction and Statistics of Discontinuity Orientation and Trace Length from Typical Fractured Rock Mass: A Case Study of the Xinchang Underground Research Laboratory Site, China