Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

Configurable Organic Charge Carriers toward Stable Perovskite Photovoltaics

Inorganic perovskite solar cells: an emerging member of the photovoltaic community

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Methods and strategies for achieving high-performance carbon-based perovskite solar cells without hole transport materials

Charge transporting materials for perovskite solar cells

Molecular Design of Hole Transport Materials to Immobilize Ion Motion for Photostable Perovskite Solar Cells

Carbon‐Based Perovskite Solar Cells without Hole Transport Materials: The Front Runner to the Market?

Pyrene-Cored Hole-Transporting Materials for Efficient and Stable Perovskite Solar Cells

Review of Inorganic Hole Transport Materials for Perovskite Solar Cells

Efficient Carbon-Based CsPbBr3 Inorganic Perovskite Solar Cells by Using Cu-Phthalocyanine as Hole Transport Material

A charge-separated interfacial hole transport semiconductor for efficient and stable perovskite solar cells

Advances in hole transport materials engineering for stable and efficient perovskite solar cells

Stabilizing and Scaling Up Carbon-Based Perovskite Solar Cells

Regulating Charge Carrier Extraction and Transport with Dual-interface Modification for Efficient Perovskite Solar Cells

Inorganic–organic halide perovskites for new photovoltaic technology

Over 20% PCE Perovskite Solar Cells with Superior Stability Achieved by Novel and Low-Cost Hole-Transporting Materials

Stable and efficient perovskite solar cells via hydrogen bonding and coordination

Carbon-based Perovskite Solar Cells with Electron and Hole-Transporting/-blocking Layers

The Insolubility Problem of Organic Hole-Transport Materials Solved by Solvothermal Technology: Toward Solution-Processable Perovskite Solar Cells

Exploring the electrochemical properties of hole transporting materials from first-principles calculations: an efficient strategy to improve the performance of perovskite solar cells

Regulating Charge Carrier Recombination in the Interconnecting Layer to Boost the Efficiency and Stability of Monolithic Perovskite/Organic Tandem Solar Cells