Abstract:This thesis describes the evaluation of using an inertial measurement unit (IMU) device to measure the movement of the abdomen with the aim to detect different breathing activities and to demonstrate the feasibility to use this technique for automatic control of Functional Electrical Stimulation of Abdominal Muscles (FESAM). People with high-level spinal cord injury (SCI) have difficulties on voluntary breathings, as well as forced respiration, such as cough. The method of FESAM can improve respiratory function. Respiratory activity can be obtained directly by measuring the airflow at the mouth and nose, using a face mask connected to a spirometer. While this approach is suitable in a laboratory environment, the face mask is inconvenient for long-term, every day use. An alternative way to detect respiratory activity is to measure the movement of the abdomen, which is less intrusive and more comfortable. Plethysmography is typically used to measure such movement in sleep studies. In this work, the suitability of an IMU sensor device attached to the abdomen is investigated. Experiments were conducted with 5 neurologically intact subjects with both an IMU and spirometer device. Signals recorded from both sensors during different breathing tasks such as quiet breathing, cough, deep breathing and talking are compared. The phase shifts between the signals from the two sensors are analysed and found to be within +/-U. Analysis of the magnitude of the IMU signals and their power spectrum confirm that it is possible to represent different breathing activities with these sensors. A control system which can detect breathing activity in real-time, and controls a stimulator to generate appropriate electrical stimulations to the abdominal muscles, is also presented in this thesis. A multi characteristic-analysis algorithm has been developed. This enhanced control system can analyse multiple characteristics of the breathing signal in real-time, and uses a flowchart structure to detect breathing activities. The results are used to control the stimulator which delivers suitable electrical stimulations during quiet breathing and coughing. A graphical user interface (GUI) was implemented to interface with the sensor system, control system and stimulator system. This GUI was designed to graphically control the parameters of the entire system, and to show the system results visually. By using the GUI, the entire control system is more accessible to non-technical people. In addition, the control of the three systems becomes easier and is simplified. The possibility to save and load profiles for different patients also makes the configuration of the system more convenient.

Design of a Wearable Dynamic Respiratory Monitoring System Based on a Distributed Inertial Measurement Unit

A Differential Inertial Wearable Device for Breathing Parameter Detection: Hardware and Firmware Development, Experimental Characterization

A Wearable Respiration Monitoring System Based on Digital Respiratory Inductive Plethysmography

A Wearable System with Embedded Conductive Textiles and an IMU for Unobtrusive Cardio-Respiratory Monitoring

Reliable Breathing Tracking With Wearable Mask Device

Respiro: Continuous Respiratory Rate Monitoring During Motion via Wearable Ultra-Wideband Radar

Design of Wearable Dynamic Sleeping Respiration Monitoring System

Wearable Inertial and Pressure Sensors-Based Chest Compression Quality Assessment to Improve Accuracy and Robustness

An Inertial-Based Wearable System for Monitoring Vital Signs during Sleep

A Multimodal Wearable System for Continuous and Real-Time Breathing Pattern Monitoring During Daily Activity

Ultrasound Sensors for Diaphragm Motion Tracking: An Application in Non-Invasive Respiratory Monitoring

A Wearable Multimodal Wireless Sensing System for Respiratory Monitoring and Analysis

How Do You Breathe-a Non-Contact Monitoring Method Using Depth Data

A Real-Time Respiration Monitoring and Classification System Using a Depth Camera and Radars

Integrated wearable smart sensor system for real-time multi-parameter respiration health monitoring

A Wearable RF Sensor for Monitoring Respiratory Patterns

Sensor Systems for Automatic Control of Abdominal Stimulation for Respiratory Support in Tetraplegia

A Smart Real-Time Human Respiratory Monitoring System Based on a High-Performance Flow Sensor and an Accurate Breathing Rate Recognition Algorithm

Contactless Respiration Monitoring Using Ultrasound Signal With Off-The-Shelf Audio Devices

Unobtrusive Respiratory Monitoring System for Intensive Care

Quantitative and Real‐Time Evaluation of Human Respiration Signals with a Shape‐Conformal Wireless Sensing System