Abstract:The physical properties of tight shale reservoirs have always been a hot topic of discussion, and the tuff reservoirs have also attracted more and more attention. Log predicting of the porosity is also important for the exploration and development of tight oil. Tight oil resources have been found in tight shale and tuff reservoirs in the Chang 7 Member of the Upper Triassic Yanchang Formation in the Ordos Basin, China. However, the logging method that effectively predicting porosity of the Chang 7 Member is lacking, and few people have discussed how to optimize the log interpretation methods. In this study, the characteristics of shale and tuff reservoirs were summarized by microscope and scanning electron microscope observation, X-ray diffraction, pore and permeability experiment, and the logging data. In order to find the optimal method of porosity prediction, four methods were performed: multiple regression fitting, multi-component volume model, porosity logging formula, and back propagation neural network method.The "Zhangjiatan Shale" of the Chang 7 Member is characterized by abundant sandy lamina and tuff lamina, compared with the tuff reservoir, the enrichment of pyrite (average 22.7 wt%) and total organic matter (>6%) increase the content of intercrystalline pores and organic matter related pores, the logging response is characterized by high natural gamma ray, low spontaneous potential and high acoustic. The tuff reservoir is mainly composed of vitric tuff and crystal-vitric tuff, hence, the rich in intergranular pore and micro-fracture can be explained by the dissolution and devitrification of vitric and crystal fragments, and the logging characteristic is opposite to that of the "Zhangjiatan Shale". Four methods for predicting porosity are established. First, appropriate logging parameters are selected for regression fitting in the "Zhangjiatan Shale" (e.g., gamma ray, deep lateral logging resistivity, density and spontaneous potential) and tuff reservoir (e.g., acoustic, density, compensated neutron logging). Then, the rock multi-component volume model was established as rock skeleton, clay or tuff matter, organic matter, and pores. The logging parameters of the skeleton, clay and organic matter were obtained by intersection graphs, which were applied in the improved porosity logging formulas. The effect of organic matter on logging was considered into the traditional porosity prediction formula, a third prediction method was established. Finally, the BP method was introduced into the porosity prediction work, and the neural network parameters were adjusted according to the log and porosity data. The learning rate and the learning accuracy were set as 0.1 and 10−6 in the study area. The error analysis between the result predicted and measured shows that the multi-component volume model is suitable for the "Zhangjiatan Shale" (the correlative coefficient R>80%), while the back propagation neural network is the best method for the tuff reservoir (the correlative coefficient R>90%).

Optuna-XGBoost Porosity Prediction for Logging Profiles of Carbonate Formations

Production Feature Analysis of Global Onshore Carbonate Oil Reservoirs Based on XGBoost Classier

Bottomhole Pressure Prediction of Carbonate Reservoirs Using XGBoost

Prediction and application of porosity based on support vector regression model optimized by adaptive dragonfly algorithm

NMR log response prediction from conventional petrophysical logs with XGBoost-PSO framework

Application of Xgboost Algorithm in Rate of Penetration Prediction with Accuracy

Study on optimal selection of porosity logging interpretation methods for Chang 73 segment of the Yanchang Formation in the southwestern Ordos Basin, China

Permeability Prediction of Carbonate Reservoir Based on Nuclear Magnetic Resonance (NMR) Logging and Machine Learning

Logging Interpretation Method Based on Bayesian Optimization XGBoost

A Borehole Porosity Prediction Method with Focusing on Local Shape

Production Capacity Prediction of Fractured Horizontal Wells Based on XGBoost

Permeability Predictions for Tight Sandstone Reservoir Using Explainable Machine Learning and Particle Swarm Optimization

Total organic carbon content prediction based on support-vector-regression machine with particle swarm optimization

Facies-controlled Porosity Prediction of Sandstone Reservoirs Based on Semi-Supervised Gaussian Mixture Model and Gradient Boosting Tree

Machine-Learning-Based Approach to Optimize CO2-WAG Flooding in Low Permeability Oil Reservoirs

Well-Logging Prediction Based on Hybrid Neural Network Model

Porosity prediction through well logging data: A combined approach of convolutional neural network and transformer model (CNN-transformer)

A novel prediction method for coalbed methane production capacity combined extreme gradient boosting with bayesian optimization

Research on prediction of PPV in open-pit mine used RUN-XGBoost model

Porosity prediction using ensemble machine learning approaches: A case study from Upper Assam basin

Deep learning reservoir porosity prediction method based on a spatiotemporal convolution bi-directional long short-term memory neural network model