Abstract:Carbon emissions, climate change and the finite resource of fossil fuels are driving an increasing need for renewable energy, and in particular, an interest in photovoltaic (PV) cells. Most PV cells operate in temperatures above 25 oC, and the performance of PV cells reduces with increased operation temperature. This research aims to resolve some engineering issues by integrating PV cells with a thermoelectric generator (TEG). Integrating TEG with PV cells helps to transfer heat from the PV through the TEG to an actively or passively cooled heat sink. The temperature difference established across the TEG can generates additional electrical power by the Seebeck effect. The main objective of this research is to investigate the feasibility of developing a PV/TEG hybrid system that can offer better performance than that can be obtained from each individual system. The key parameters, which are crucial to the development of efficient hybrid system, were investigated. These include the temperature coefficient of PV cells, geometry of TEGs and thermal coupling between the PV and TEG. It was found that the dye sensitised solar cells (DSC) has a preferred temperature coefficient that are the most suitable for use in a PV/TEG system. In this work, a theoretical model was also developed for determination of the optimal geometry of the TEG for PV/TEG hybrid systems. A special type of DSCs was designed and fabricated which employ titanium as the counter electrode (other than conventional FTO-glass) to improve the thermal coupling between the PV and TEG. A unique DSC/TEG hybrid system was constructed using this special type of DSC and its generating performance was studied in comparison with a similar system that uses conventional FTO-glass counter electrode. The experimental results show that the power output and efficiency of the hybrid PV/TEG system with Ti counter electrode is significantly higher than the similar system with a conventional FTO-glass electrode due to an improved thermal coupling between the DSC and TEG. It is concluded that a hybrid PV/TEG system can provide improved performance beyond that of each individual system. However, the improvement can only be achieved with appropriate type of PV cells, optimised TEGs and advanced structures for integration, such as Ti counter electrode.

Scalable Spectrally Selective Solar Cell for Highly Efficient Photovoltaic Thermal Conversion

Scalable Selective Absorber with Quasiperiodic Nanostructure for Low-Grade Solar Energy Harvesting

Parametric Characteristics and Optimization of a Novel Near-Field Thermophotovoltaic and Thermoelectric Hybrid System for Energy Harvest

Three-junction Tandem Photovoltaic Cell for a Wide Temperature Range Based on a Multilayer Circular Truncated Cone Metamaterial Emitter

Toward high-efficiency solution-processed tandem solar cells

Thermodynamic Theorical and Parametric Analysis of a Photovoltaic-Photo/thermochemistry Synergistic Conversion System with Full Spectrum Cascading Utilization

Highly Efficient Semitransparent Solar Cells with Selective Absorption and Tandem Architecture.

A Hybrid Parabolic Trough Solar Collector System Integrated with Photovoltaics

Synergistic photothermal-thermoelectric-photovoltaic energy generation via a transparent spectral modulating solar module

An Efficient Ordered Conversion System for Hydrogen and Electricity Cogeneration Driven by Concentrated Solar Energy

Comparison between spectrum-split conversion and thermophotovoltaic for solar energy utilization: Thermodynamic limitation and parametric analysis

Perovskite Solar Cell-Thermoelectric Tandem System with a High Efficiency of over 23%

Hybrid Photon-Enhanced Thermionic Emission and Photovoltaic Converter with Concentrated Solar Power

A Highly-Efficient Concentrated Perovskite Solar Cell-Thermoelectric Generator Tandem System

Full-spectrum solar energy harvesting using nanotechnology-enabled photovoltaic/thermoelectric hybrid system

A perovskite solar cell-photothermal-thermoelectric tandem system for enhanced solar energy utilization

Total solar spectrum energy converter with integrated photovoltaics, thermoelectrics, and thermal energy storage: System modeling and design

Spectral Selectivity of CdTe Cells with Substrate Configuration for Photovoltaic/Thermal Applications

Thermodynamic and optical analyses of a novel solar CPVT system based on parabolic trough concentrator and nanofluid spectral filter

Multi-scale multi-physic coupled investigation on the matching and trade-off of conversion and storage of optical, thermal, electrical, and chemical energy in a hybrid system based on a novel full solar spectrum utilization strategy

Solar radiation transfer and performance analysis of an optimum photovoltaic/thermal system