Abstract:In order to address the problems of metal leaching and low electron transfer efficiency, the iron (Fe) nitrogen (N) co-doped MOFs derived carbon catalysts presented a promising strategy to activate peroxymonosulfate (PMS) for water purification . In this work, using the MOF-5 as a template and iron phthalocyanine (FePc) and dicyandiamide (DCD) as a source, Fe, N co-doped carbons were prepared through milling and two-step pyrolysis . The catalytic performance and mechanism of the materials on tetracycline hydrochloride (TC) degradation in the PMS activation system (0.1Fe/N-CPMS) was systematically investigated. The results showed that the stable framework structure of MOFs-derived carbon conduced to encapsulate the Fe nanoparticles within the carbon skeleton, and then the xFe/N-C catalyst with hierarchical pore structure and good electrical conductivity was obtained, which significantly improved the TC catalytic performance. Notably, the 0.1Fe/N-C exhibited the greatest degradation performance achieving a degradation rate of 0.6315 min -1 , which was approximately five times higher than that of N-C. Moreover, the degradation performance of the 0.1Fe/N-C kept the stability in various interference conditions, and still remained over 80% after three cycles test. Combine with the characterization and DFT calculation, the mechanism of the TC degradation in 0.1Fe/N-CPMS system was revealed by a non-radical process dominated by electron transfer, and the degradation efficiency was greatly improved by the synergistic effect of Fe/N on the as-prepared material. The received findings provide an electron transfer tuning strategy of Fe/N co-doped carbon nanomaterials synthesis for promoting the non-radical degradation pathways in the application of organic pollutants removal.

Homogeneously Dispersed Fe and N Sites in a Porous Carbon Framework for Persulfate Activation in Tetracycline Hydrochloride Degradation

Synergistic effect of iron and nitrogen on porous carbon to improve electron transfer efficiency resulting in the enhancement of tetracycline hydrochloride removal

An electron transfer tuning strategy for the efficient degradation of tetracycline hydrochloride by Fe-N co-doped carbon materials activated with peroxymonosulfate

Fe/Co Bimetallic Nanoparticles Embedded In Mof-Derived Nitrogen-Doped Porous Carbon Rods As Efficient Heterogeneous Electro-Fenton Catalysts For Degradation Of Organic Pollutants

Encapsulation of Fe-0-dominated Fe3O4/Fe-0/Fe3C Nanoparticles into Carbonized Polydopamine Nanospheres for Catalytic Degradation of Tetracycline Via Persulfate Activation

Porous N-doped Carbon Nanospheres with Encapsulated Cobalt Nanocrystals for Persulfate Activation to Degrade Tetracycline

Nitrogen-doped Fe-MOFs derived carbon as PMS activator for efficient degradation of tetracycline

Hierarchical porous N-doped carbon encapsulated CoFe2O4-CoO nanoparticles derived from layered double hydroxide/chitosan biocomposite for the enhanced degradation of tetracycline

Iron–Cobalt Bimetallic Metal–Organic Framework-Derived Carbon Materials Activate PMS to Degrade Tetracycline Hydrochloride in Water

Mechanisms and Degradation Pathways of Tetracycline by Co7Fe3 Nanoparticles Anchored Porous Carbon Activated Peroxymonosulfate

High efficiency degradation of tetracycline by peroxymonosulfate activated with Fe/NC catalysts: Performance, intermediates, stability and mechanism

Nonradical-dominated Peroxydisulfate Activation by Nitrogen-Rich Hierarchical Porous Graphite Carbon for Efficient Degradation of Tetracycline

MOF derived highly dispersed bimetallic Fe-Ni nitrogen-doped carbon for enhanced peroxymonosulfate activation and tetracycline degradation

Facile fabrication of Fe/Fe3C embedded in N-doped carbon nanofiber for efficient degradation of tetracycline via peroxymonosulfate activation: Role of superoxide radical and singlet oxygen

A Magnetic Biochar Catalyst with Dual Active Sites of Fe3C and Fe4N Derived from Floc: the Activation Mechanism for Persulfate on Degrading Organic Pollutant

Activation of Peroxodisulfate Coupled with Photocatalysis by Pyrrolic N‐Rich Fe‐N4 Sites for High Efficiency Degradation of Tetracycline Hydrochloride

Nitrogen-doped Porous Carbon Derived from Graphite of Solid Waste for Activating Peroxymonosulfate to Degradation Tetracycline

Nitrogen-doped Porous Carbon Transformed from Polymer Carbon Nitride for Persulfate Activation Towards Efficient Degradation of Tetracycline Via the Electron Transfer-Dominated Non-Radical Pathway

Self-Supporting CoFe2O4 Nanoparticles on 2D G-C3n4/2d Loofah Activated Carbon Mediated Peroxymonosulfate Activation for Tetracycline Degradation

Mesoporous bimetallic Fe/Co as highly active heterogeneous Fenton catalyst for the degradation of tetracycline hydrochlorides

Synthesis of Novel Fe-CNs-P/S Carbon Materials for Sustainable Water Treatment: Activation of Persulfate for Efficient Tetracycline Degradation