Abstract:This paper presents a new pose measurement method of microminiature parts that is capable of transforming one dimension (1D) contour size obtained by optical micrometer to three dimension (3D) data with six parameters for microassembly. Pose measurement is one of the most important processes for microminiature parts' alignment and insertion in microassembly. During the past few years, researchers have developed their microassembly systems focusing on visual identification to obtain two or three dimension data with no more than three parameters. Scanning electronic microscope (SEM), optical microscope, and stereomicroscope are applied in their systems. However, as structures of microminiature parts become increasingly complex, six parameters to represent their position and orientation are specifically needed. Firstly, The pose measurement model is established based on the introduction of measuring objects and measuring principle of optical micrometer. The measuring objects are microminiature parts with complex 3D structure. Two groups of two dimension (2D) data are gathered at two different measurement positions. Then part pose with 6 parameters is calculated, including 3 position parameters of feature point of the part and 3 orientation parameters of the part axis. Secondly, pose measurement process for a small shaft, vertical orientation determination, and position parameters obtaining are presented. 2D data is gathered by scanning the generatrix of the part, and valid data is extracted and saved in arrays. A vertical orientation criterion is proposed to determine whether the part is parallel to the Z-axis of the coordinate. If not, 2D data will be fixed into a linear equation using least square algorithm. Then orientation parameters are calculated. Center of Part End (CPE) is selected as feature point of the part, and its position parameters are extracted form two group of 2D data. Finally, a fast pose measurement device is developed and representative experiments are carried out. Results show that the measurement method could obtain pose of complex 3D micro parts fast and accurately, and can meet the demand of microassembly system.

High-accuracy 6-D Pose Measurement Method for 3C Thin Parts in Robotic Assembly by Monocular Vision

WireframePose: Monocular 6D Pose Estimation of Metal Parts Based on Wireframe Extraction and Matching

6D Pose Estimation Method of Metal Parts for Robotic Grasping Based on Semantic-Level Line Matching

ContourPose: Monocular 6D Pose Estimation Method for Reflective Texture-Less Metal Parts

6D Pose Estimation Based on 3D Edge Binocular Reprojection Optimization for Robotic Assembly

High-Precision Pose Estimation Method of the 3C Parts by Combining 2D and 3D Vision for Robotic Grasping in Assembly Applications.

Pose Estimation Algorithm of 3C Parts Based on Virtual 3D Sensor for Robot Assembly

A High-Precision Assembly System of 3C Parts Based on 6D Pose Estimation and Visual Servoing

Sparse Template-Based 6-D Pose Estimation of Metal Parts Using a Monocular Camera.

Binocular vision and priori data based intelligent pose measurement method of large aerospace cylindrical components

High-precision Human Body Acquisition Via Multi-View Binocular Stereopsis

Pose Measurement Method with Six Parameters for Microassembly Based on an Optical Micrometer

An Improved Robust Method for Pose Estimation of Cylindrical Parts with Interference Features.

A high-accuracy pose measurement system for robotic automated assembly in large-scale space

High-Precision Monocular Vision Guided Robotic Assembly Based on Local Pose Invariance

6D Assembly Pose Estimation by Point Cloud Registration for Robot Manipulation

Fast 6D Object Pose Estimation of Shell Parts for Robotic Assembly

Reconstruction-based 6D Pose Estimation for Robotic Assembly.

A Method for Unseen Object Six Degrees of Freedom Pose Estimation Based on Segment Anything Model and Hybrid Distance Optimization

Pose Measurement Method Based on Machine Vision and Novel Directional Target

High-Accuracy Relative Pose Measurement of Noncooperative Objects Based on Double-Constrained Intersurface Mutual Projections