Abstract:Shape-stabilized phase change materials (SSPCM) offer significant potential in industrial applications, effectively addressing corrosion and thermal stress issues associated with phase change material (PCM) at high temperatures. To advance the large-scale development of SSPCMs, this study innovatively proposes the wet-state extrusion and sintering method to prepare SSPCM particles (SSPCM-P) and characterize them. Solar salt is the PCM, while calcined dolomite is the skeletal support material (SSM). Results indicate successful fabrication of SSPCM-P with salt content below 60 wt% post-sintering, a lower threshold than those achieved via cold-pressing and hot-sintering methods. This is because, during wet mixing and evaporation, salts migrate to the surface of the sample and mixtures with high salt content on the surface tend to bond together during sintering. SEM observations reveal a transparent interface between SSM and PCM pre-sintering, whereas post-sintering, PCM uniformly adheres to the SSM surface, with smaller particle sizes demonstrating enhanced densification. SSPCM-P shows commendable chemical stability, with the enthalpy of melting/solidification for SSPCM-P with 60 % salt content slightly below the theoretical value at 63.6/63.3 J/g. Charging and discharging experiments highlight significantly improved thermal properties of SSPCM-P compared to sensible heat materials, enabling oil heating to higher temperatures. SSPCM-P can maintain stability during recirculation. Furthermore, it is noted that SSPCM-P is unsuitable for vapour applications due to salt precipitation, making direct contact heat transfer with vapour unfeasible. As a solution, the study proposes the application of SSPCM-P in finned tube heat exchangers to circumvent chemical incompatibility issues with heat transfer fluid, leveraging its compact size, ease of preparation, and stacking capabilities. These pivotal findings present new industrial solutions for SSPCM preparation, promising significant technological advancements in energy storage and heat transfer.

Development of a Novel Salt Hydrate Phase Change Material Slurry for Thermal Management and Heat Transportation in Solar Photovoltaic Thermal Systems

Preparation, Characterisation and Property Modification of a Calcium Chloride Hexahydrate Phase Change Material Slurry with Additives for Thermal Energy Transportation

Enhancing the heat transfer and photothermal conversion of salt hydrate phase change material for efficient solar energy utilization

Preparation, Properties and Characterisation of Microemulsion PCM Slurry

A Method to Evaluate Natural Convection Heat Transfer in Microencapsulated Phase Change Material (MPCM) Slurry: an Experimental Study

Thermal Energy Storage Using Hybrid Nanofluid Phase Change Material (PCM) based on Waste Sludge Incorp Rated ZnO/α-Fe2O3

The Application of Solar-to-thermal Conversion Phase Change Material in Novel Solar Water Heating System

Thermal Enhancement of Solar Energy Storage Using Phase Change Materials

Preparation and characterizations of a novel temperature-tuned phase change material based on sodium acetate trihydrate for improved performance of heat pump systems

Preparation and characterization of shape-stable phase change particles: A new option for high-temperature thermal energy storage

A Review of Thermo-Fluidic Performance and Application of Shellless Phase Change Slurry: Part 1 – Preparations, Properties and Applications

Experimental Investigation of the Energy Performance of a Novel Micro-encapsulated Phase Change Material (MPCM) Slurry Based PV/T System

Study of the Phase-Change Thermal-Storage Characteristics of a Solar Collector

Sunlight-driven organic phase change material-embedded nanofiller for latent heat solar energy storage

Coal gasification slag-based-sodium acetate trihydrate composite phase change materials for solar thermal energy storage

Preparation and thermal properties of sodium carbonate decahydrate as a novel phase change material for energy storage

Enhanced thermal properties of hydrate salt/poly (acrylate sodium) copolymer hydrogel as form-stable phase change material via incorporation of hydroxyl carbon nanotubes

Experimental study on characteristics of a nano-enhanced phase change material slurry for low temperature solar energy collection

Review on the thermal property enhancement of inorganic salt hydrate phase change materials

Polyethylene Glycol-Based Phase Change Materials with High Photothermal Conversion Efficiency and Shape Stability in an Aqueous Environment for Solar Water Heater

A novel composite PCM for seasonal thermal energy storage of solar water heating system