Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Synthesis and high gas sensitivity of tin oxide nanotubes

Synthesis of flowerlike nano-SnO2 and a study of its gas sensing response

Enhanced Ethanol-Sensing Characteristics of Au Decorated In-doped SnO2 Porous Nanotubes at Low Working Temperature

High-performance acetone sensor based on electrospun Tb-doped a-Fe<sub>2</sub>O<sub>3</sub> nanotubes

Preparation of gas sensors by hollow SnO 2 electrospun nanofibers

Two-step Solid-State Synthesis of Tin Oxide and Its Gas-Sensing Property

Preparation of {200} crystal faced SnO 2 nanorods with extremely high gas sensitivity at lower temperature

Ordered Mesoporous Tin Oxide Semiconductors with Large Pores and Crystallized Walls for High-Performance Gas Sensing

High surface area ceramic semiconductor SnO2 gas sensor

Templating Synthesis of Sno2 Nanotubes Loaded with Ag2o Nanoparticles and Their Enhanced Gas Sensing Properties

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

One-step Solid-State Reaction Synthesis and Gas Sensing Property of Tin Oxide Nanoparticles

Preparation of {200} crystal faced SnO2 nanorods with extremely high gas sensitivity at lower temperature

Assembling SnO2 Nanocubes to Nanospheres for High-Sensitivity Sensors

Nanosized tin dioxide based semiconductor materials for creation of gas sensors

Branching TiO2 Nanowire Arrays for Enhanced Ethanol Sensing

Room Temperature Ionic Liquids Assisted Green Synthesis Of Nanocrystalline Porous Sno2 And Their Gas Sensor Behaviors

Combination of chemical vapor deposition and thermal growth methods for facile synthesis of tin oxide-doped multiwalled carbon nanotubes

High Ethanol Sensitive SnO2 Microspheres

Synthesis of Sno2 Nanoparticles Using A Solution Plasma and Their Gas-Sensing Properties

Electrical and gas-sensing properties of mesostructured tin oxide-based H2 sensor