Abstract:Raised roads and their appurtenances (i.e., ditches and culverts) can considerably modify the natural hydrologic processes (e.g., flow direction and runoff spatial distribution) of low-relief watersheds. However, these effects are not well understood and are poorly documented in literature. Also, there is a serious lack of effective approach that can be used to describe these effects in common simulation models, including the Soil and Water Assessment Tool (SWAT). As a result, these effects have been rarely taken into account by the existing model applications. The results from those applications are likely to be misleading for watershed management decisions. The objectives of this study were to (1) develop an approach that enables the incorporation of the aforementioned effects into hydrologic models (e.g., SWAT), and (2) evaluate whether and how a model's simulation performance can be improved by taking these effects into account. The evaluation was conducted for the low-relief Wild Rice River watershed located in northwestern Minnesota by comparing the SWAT-NoRoad model, which is based on a "conventional flow direction map" derived using the deterministic eight-neighbor (D8) algorithm, with the SWAT-Road model, which is based on a "corrected flow direction map" generated by using the approach developed in this study. The corrected map provided more realistic flow directions for the regions adjacent to the raised roads than the conventional map. Compared with the SWAT-NoRoad model, the SWAT-Road model had a compatible performance for a calibration period but was more robust and did a better job in reproducing the observed streamflows for a validation period at two U.S. Geological Survey gauging stations, as indicated by the larger values for Nash-Sutcliffe (E-j(2)> 0.60) and determination (R-2 > 0.68) coefficients, as well as from the watershed perspective view, as indicated by the larger values for performance virtue (PVk > 0.64). In addition, the spatial patterns of water yield predicted by the SWAT-Road model were more accurate because they are more similar to those of the topographic wet index values than the spatial patterns predicted by the SWAT-NoRoad model. Furthermore, if the raised roads were neglected, the mean daily water yields for the study area would be erroneously predicted by up to 0.6 mm. A reasonable generalization of this study is that hydrologic effects of raised roads are important for accurately simulating watersheds with a low topographic relief and thus need to be taken into account. DOI: 10.1061/(ASCE)HE.1943-5584.0000351. (C) 2011 American Society of Civil Engineers.

Backwater Rise Upstream of a Stream-Crossing Culvert Due to Large Wood Accumulation and Sediment Deposition

Clogging Development and Hydraulic Performance of the Horizontal Subsurface Flow Stormwater Constructed Wetlands: a Laboratory Study

Application and Design of an Efficient Siphon Dewatering System for Debris Flow Mitigation: A Case Study of a Small Catchment in Zhejiang Province, China

A Scaled Physical Model Study of Culvert Blockage Exploring Complex Relationships Between Influential Factors

Identification method and application of critical load contribution areas based on river retention effect

Sediment transport and riverbed evolution of sinking streams in a dammed karst river

Upstream morphological effects of a sequential check dam adjustment process

A watershed-scale multi-approach assessment of design flood discharge estimates used in hydrologic risk analyses for forest road stream crossings and culverts

Simulating Hydrologic Effects of Raised Roads Within A Low-Relief Watershed

Assessment of flood regulation service based on source–sink landscape analysis in urbanized watershed

Method for analyzing urban waterlogging mechanisms based on a 1D-2D water environment dynamic bidirectional coupling model

Clarifying urban flood response characteristics and improving interpretable flood prediction with sparse data considering the coupling effect of rainfall and drainage pipeline siltation

Blockage slope and ratio effects on box culvert hydraulics

Comparative Roles Of Roughness Reduction And Bed Erosion On Downstream Peak Discharge Increase

Experimental study on the upstream water level rise and downstream scour length of a submerged dam

Amplification of Downstream Flood Stage Due to Damming of Fine-Grained Rivers.

Development of an Integrated Urban Flood Model and Its Application in a Concave-Down Overpass Area

Changes in lateral floodplain connectivity accompanying stream channel evolution: Implications for sediment and nutrient budgets

Modelling urban flooding integrated with flow and sediment transport in drainage networks

Research on bearing behaviour of buried double corrugated steel culvert with high fill considering spacing effect

Mechanisms of Reservoir Impoundment-Induced Large Deformation of the Guobu Slope at the Laxiwa Hydropower Station, China: Preliminary Insights from Remote Sensing and Numerical Modelling