Abstract:Thermal plasma-driven dry reforming of methane (DRM) has gained increased attention in recent years due to its high conversion and energy conversion efficiency (ECE). Recent experimental work investigated the performance of a pure CO 2 plasma with post-plasma CH 4 injection. The rationale behind this strategy is that by utilizing a pure CO 2 plasma, all plasma energy can be used to dissociate CO 2 , while CH4 reforming proceeds post-plasma in the reforming reactor with residual heat, potentially improving the energy efficiency compared to injecting both CO2 and CH4 into the plasma. To assess whether post-plasma CH 4 injection indeed improves the DRM performance, we developed a chemical kinetics model describing the post-plasma conversion process. We first validated our model by reproducing the experimental results of the pure CO 2 plasma with post-plasma CH 4 injection. Subsequently, we compared both strategies: injecting only CO 2 inside the plasma while injecting CH 4 post-plasma, vs classical plasma-based DRM. Our modeling results indicate that below specific energy inputs (SEI) of 220 kJ/mol, the total conversion slightly improves (ca. 5 %) with the first strategy. However, the ECE is slightly lower due to the low H 2 selectivity caused by substantial H 2 O formation. The highest conversion and ECE are obtained at SEI values of 240 - 280 kJ/mol, where both strategies yield nearly identical results, indicating the limited potential of improving the performance of DRM by pure CO 2 plasma with post-plasma CH 4 injection. Nevertheless, the approach is still very valuable to allow higher CH 4 /CO 2 ratios without problems of coke formation within the plasma, and thus, to improve plasma stability and reach higher syngas ratios, which is more useful for further Fischer-Tropsch or methanol synthesis.

Recent Advances in Plasma-Based Methane Reforming for Syngas Production

Progress on Reforming of Carbon Dioxide and Methane to Synthesis Gas by Thermal Plasma

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

Plasma Assisted Dry Reforming of Methanol for Clean Syngas Production and High-Efficiency CO2 Conversion

Experimental study on dry reforming of methane by a plasma catalytic hybrid system

A review of different catalytic systems for dry reforming of methane: Conventional catalysis-alone and plasma-catalytic system

Reforming of Methane and Carbon Dioxide by DC Water Plasma at Atmospheric Pressure

Plasma‐Assisted Reforming of Methane

Microwave plasma-based dry reforming of methane: Reaction performance and carbon formation

Bi-reforming of Methane in a Carbon Deposit-Free Plasmatron with High Operational Adaptability

Non-Thermal Plasma for Process and Energy Intensification in Dry Reforming of Methane

Recent advances in unconventional heating and external field-assisted enhancement for dry reforming of methane

CH4 reforming with CO2 using a nanosecond pulsed dielectric barrier discharge plasma

Recent Advances in Nanostructured Catalysts for Photo-Assisted Dry Reforming of Methane

Reforming of CH4 and CO2 by Combination of Alternating Current-Driven Nonthermal Arc Plasma and Catalyst

Comparative analysis of methane conversion: pyrolysis, dry and steam thermal plasma reforming

The panorama of plasma-assisted non-oxidative methane reforming

Optimization of Discharge Plasma Reactor for Dry Reforming of Methane using Response Surface Methodology

Plasma Assisted Dry Methane Reforming Using Gliding Arc Gas Discharge: Effect of Feed Gases Proportion

Recent progress in photo-thermal synergistic catalysis for methane dry reforming

Can post-plasma CH 4 injection improve plasma-based dry reforming of methane? A modeling study