Abstract:Karst disasters pose a substantial threat to geological environmental stability, resulting in ground collapse and groundwater contamination. To determine the spatial distribution of karst terrain, high-resolution underground imaging is essential. However, traditional synchronous observation systems struggle to achieve high-density spatial sampling due to limitations in instrument quantity. In this study, we conducted short-term synchronous and asynchronous ambient noise observations in a deserted parking lot in Hangzhou, China, to overcome the limitations of insufficient sampling density. We performed the first-round observation on one half of the parking lot for around 24 hours, followed by an immediate relocation of the stations to the other half for the second-round ~24-hour observation. Additionally, 29 fixed stations were placed outside the parking lot to continuously record ambient noise.The imaging results of noise source distribution indicate that high-frequency noise sources exhibit significant non-uniform distribution during the daytime, which could affect the accuracy of the retrieved surface waves. To address this, we propose using the similarity of cross-component cross-correlation functions to select only data segments with stronger in-line noise sources, thereby enhancing the reliability of synchronous cross-correlation functions. Furthermore, we utilized the cross-component cross-correlation stacking method to suppress higher-mode surface waves and reduce their impact on the accuracy of the computation of asynchronous cross-correlation functions. Applying the ambient noise source-receiver interferometry method to the synchronous cross-correlation functions, we successfully retrieved the surface waves between asynchronous stations. In total, we obtained 66,472 pairs of cross-correlation functions, comprising 38,416 synchronous pairs and 28,056 asynchronous pairs. We extracted phase velocity dispersion curves of the fundamental mode surface wave for station pairs within the parking lot and utilized the direct surface wave tomography method to obtain the subsurface 3D shear-wave velocity structure.The inversion results revealed the presence of two distinct low-velocity anomalies in the northeastern and southwestern parts of the site at depths around 40 m, which align with the location and depth of karst caves obtained from drilling data, confirming the reliability of the inversion results. Furthermore, we uniformly subsampled half of the data to simulate the case of insufficient station quantity, and the inversion model exhibited less apparent responses to the low-velocity anomalies, emphasizing the necessity of dense array observations. This study demonstrates that the combined observations of synchronous and asynchronous ambient noise can be utilized for high-resolution imaging of karst characteristics.

Analysis of Nonlinear Elastic Spatiotemporal Characteristics of the Shallow Subsurface

Shallow Shear-Wave Velocity Structure Beneath the West Lake Area in Hangzhou, China, from Ambient-Noise Tomography

Near Surface Attenuation Compensation Using Downhole Seismic Data in the Qianjiang New Town Area in Urban Hangzhou

Long-Term Monitoring and Safety Evaluation of A Metro Station During Deep Excavation

Research on Signal Characteristics of Urban Geological Defects Detected by Soil Stress Waves Excited by Subway

Microseismic Monitoring of Rock Mass Fracture Response to Blasting Excavation of Large Underground Caverns Under High Geostress

Deformation and Stability Analysis of Surrounding Rock Mass in Deep Underground Cavern Based on Microseismic monitoring and Numerical Modelling

Monitoring damage growth and topographical changes in plate structures using sideband peak count-index and topological acoustic sensing techniques

Monitoring performance of slopes via ambient seismic noise recordings: Case study in a colluvium deposit

Distribution characteristics and the evolution law of excavation damage zone in the large-span transition section of high-speed railway tunnel based on microseismic monitoring

Deformation and failure analysis of surrounding rock mass in deep buried tunnels subjected to excavation

Short-term synchronous and asynchronous ambient noise tomography in urban areas: Application to Karst investigation

Microseismic Monitoring, Positioning Principle, and Sensor Layout Strategy of Rock Mass Engineering

Microseismic Monitoring of the Fracture Nucleation Mechanism and Early Warning for Cavern Rock Masses

Near-surface imaging from traffic-induced surface waves with dense linear arrays: An application in the urban area of Hangzhou, China

Seismic Imaging of Mine Tunnels by Ambient Noise along Linear Arrays

Rock fracturing observation based on microseismic monitoring and borehole imaging: In situ investigation in a large underground cavern under high geostress

Research on Technology and Application of Buried Faults Identification in Urban Underground Space

Urban Near-Surface Imaging from Ambient Noise Tomography Using Dense Seismic Networks

Acoustic emission response characteristics and numerical simulation of soil failure under uniaxial compression

A method for monitoring acoustic emissions in geological media under coupled 3-D stress and fluid flow