Abstract:Subsurface drip irrigation (SDI) is a highly efficient and safe method for water reuse, particularly with biogas slurry. However, emitter clogging risks are high and it was hard to visualize the process. This study developed a high-precision numerical simulation method using 3D industrial computed tomography scanning, inverse modeling, and numerical simulation. We investigated the spatial distribution of clogging substances at various clogging levels. A new simulation method based on a porous media boundary was compared with the traditional fixed boundary method, showing improved accuracy. The results indicated that the cumulative growth of clogging substances on different walls of emitter increased with larger clogging degree, which also resulted in significantly different distributions. As the clogging degree increased to 50 %, the maximum and minimum values of the average volume of clogging substances appeared at the upstream face (2.36 mm3) and the downstream face (1.38 mm3), respectively. Compared to the traditional fixed-boundary simulation method, the method based on permeable porous media boundary improved the relative accuracy of the flow rate by 3.41 %6.86 %. Furthermore, for the hydrodynamic parameters of emitter flow channel cross-section, the average velocity, average shear force, and average turbulent kinetic energy were 3.54 %-5.75 %, 14.93 %-16.26 %, and 11.16 %-30.46 % lower than those predicted by the fixed boundary module, respectively. The traditional fixedboundary numerical simulation method tends to underestimate the clogging degree of the emitter and the influence of the clogging substances on the internal hydrodynamic characteristics to a certain extent. In summary, the results of this study can contribute to the development of anti-clogging emitter and facilitate the implementation of SDI system using biogas slurry.

Modelling of Slurry Infiltration in Saturated Porous Media Integrating Particle Dispersion and Blockage

Mathematical Modeling of Slurry Infiltration and Particle Dispersion in Saturated Sand

Numerical simulation of cutterhead and soil interaction in slurry shield tunneling

An Analytical Solution for Contaminant Extraction in a Radial Flow Field Using PVD-enhanced System

Multi-field numerical modeling of slurry infiltration in saturated soil

A Multivariate Model of Deep Slurry Infiltration in Slurry Shield Tunneling

Hydromechanical analysis of slurry infiltration with coupled CFD–DEM method

Analytical Model for Transient Coupled Consolidation and Contaminant Transport in Landfill Liner System

A Mesoscopic Viewpoint on Slurry Penetration and Pressure Transfer Mechanisms for Slurry Shield Tunneling

Infiltration characteristics of slurries in porous media based on the coupled Lattice-Boltzmann discrete element method

Study on diffusion mechanism of viscosity time-varying slurry in unsaturated soil based on displacement effect

A novel hydro‐mechanical coupled multiphysics model for slurry penetration in sand with application to face stability analysis of shield tunnel

Study on hydrodynamic diffusion law of the swelling particle slurry in karst pipeline

Characterization of Emitter Clogging Substances Boundary in Subsurface Drip Irrigation with Biogas Slurry Using Porous Media Model

Numerical analysis of slurry penetration and filter cake formation in front of tunnel face

A Pore-Scale Numerical Framework for Solute Transport and Dispersion in Porous Media

Smoothed Particle Hydrodynamics Simulation of Water-Soil Mixture Flows

CFD–DEM modelling of the infiltration of non-spherical slurry particles in granular soils

A Coupled Cfd-Dem Simulation Of Slurry Infiltration And Filter Cake Formation During Slurry Shield Tunneling

Computational Modeling of Free-Surface Slurry Flow Problems Using Particle Simulation Method

A coupled transport model of pollutants-suspended particles in saturated porous media based on granular thermodynamics