Experimental Study of Liquid Sodium Flow and Heat Transfer Characteristics along a Hexagonal 7-Rod Bundle
Yandong Hou,Liu Wang,Mingjun Wang,Kui Zhang,Xisi Zhang,Wenjun Hu,Yingwei Wu,Wenxi Tian,Suizheng Qiu,G. H. Su
DOI: https://doi.org/10.1016/j.applthermaleng.2018.12.043
IF: 6.4
2019-01-01
Applied Thermal Engineering
Abstract:The single-phase thermal hydraulic characteristics of liquid metal sodium are very essential for the design and safety analysis of sodium-cooled fast reactor (SFR). In this paper, the pressure drop and heat transfer features of single-phase liquid sodium were experimentally investigated in a 7 rod bundle with the velocity range of 0-4 m/s, heat flux up to 120 kW/m(2) and the absolute pressure range of 0-0.2 MPa. The corresponding Reynolds number ranges from 4000 to 40,000, and the Pe number varies from 0 to 340. It was found that the critical Re number for transition-turbulent flow of single-phase liquid sodium is 13,500 in the hexagonal 7-rod bundle. Then the effects of relative axial position, wall heat flux and Re number on the heat transfer were discussed, respectively. Some existing correlations in the literatures were assessed and compared with the experimental data. Results indicated that these correlations could not predict the current experiments well because of the different geometries and working fluids. The new correlations for the friction factor and Nu number calculations were proposed based on the current experimental data. For 98.5% of heat transfer data produced by the other researchers, the prediction error of the new correlation is less than 30%. For most of the experimental data, it is less than 20%, which sufficiently proves that the correlation developed in this paper could give a good prediction of the experimental data obtained by other researchers.