Abstract:The massive consumption of petroleum and the increasingly deteriorating environment has triggered the attention and development of sustainable chemistry recently. Biomass source is the only renewable carbon source on Earth, which is regarded as the potential alternative to the current fossil fuels that cannot be regenerated in a short time. Past decades have witnessed great advances in the utilization of biomass with developed technologies. However, the quality of bio-oils obtained from pyrolysis at the various temperature is poor, which cannot be directly used as valuable chemicals and fuels. Molecular sieve catalyst (zeolite) have successfully applied in the catalytic conversion of different products after biomass pyrolysis, because of their uniform pore structure, strong acidity, and stable framework. This review emphasizes the traditional and the modification of the zeolite acidic active sites and pore structure and their roles in biomass catalytic pyrolysis. First, we compared the catalytic effects of biomass and its derivatives on traditional zeolites. The results show that ZSM-5 has the best catalytic effect (more high-value products), because of its shape selectivity. Different from the previous articles about the effect of modification on one side, this Review mainly introduces the combination of different methods to modify and optimize acidic sites and pores to improve the catalytic effect of rapid biomass pyrolysis. The zeolite was modified to improve the selectivity and yield of the target product, and a certain optimization effect was achieved. From different methods of mesopore formation to metal doping, the ways of adjusting zeolite catalysts and discussions of changes in acidity after metals being doped into zeolites are reviewed. Simultaneously, a hydrogen source was introduced to deal with the problem of insufficient hydrogen content, to improve the quality of bio-oils. Finally, the advantages and disadvantages of catalytic conversion over the modified zeolite (ZSM-5) are analyzed, and the prospects in this field are also discussed.

Biocatalytic Optimization: Performance and Mechanism of Molecular Sieve Composite Aluminum-Calcium Oxides in Tobacco Biomass Pyrolysis

Influence of Alkali and Alkali Earth Metals on Pyrolysis of Tobacco Waste

In-situ and Ex-Situ Selective Catalysis of Biochar-Based Catalysts for the Production of High-Quality Bio-Oil and H2-rich Gas from Tobacco Stem

The Effect of Oxygen on In-Situ Evolution of Chemical Structures During the Autothermal Process of Tobacco

[Influence of ZSM-5(38)/Al-MCM-41 Composite Molecular Sieve Catalysts on Pyrolysis of Cellulose].

WO3@MOF Heterostructure In-Situ Transformed and Deposited on La-Bi2WO6-BiFeWOx Composite with Enhanced Photocatalytic Performance for Degradation of Harmful and Toxic Substances Produced by Tobacco

Effective Bioremediation of Tobacco Wastewater by Microalgae at Acidic Ph for Synergistic Biomass and Lipid Accumulation

Research progress on the role of common metal catalysts in biomass pyrolysis: a state-of-the-art review

Silicon Carbide Foam Supported ZSM-5 Composite Catalyst for Microwave-Assisted Pyrolysis of Biomass

Catalytic upgrading of biomass pyrolysis volatiles over Y zeolites modified with different metal oxides

Effects of SiO2/Al2O3 ratio and Fe loading rate of Fe-modified ZSM-5 on selection of aromatics and kinetics of corn stalk catalytic pyrolysis

Catalytic pyrolysis of poplar wood over transition metal oxides: Correlation of catalytic behaviors with physiochemical properties of the oxides

Optimal metal immobilization of oxygen-enriched co-combustion of Zn/Cd hyperaccumulator and textile dyeing sludge with natural or modified kaolin

Biomass Catalytic Pyrolysis over Zeolite Catalysts with an Emphasis on Porosity and Acidity: A State-of-the-Art Review

The Effect of Ni-ZSM-5 Catalysts on Catalytic Pyrolysis and Hydro-Pyrolysis of Biomass

Challenges and Perspectives of the Conversion of Lignin Waste to High-Value Chemicals by Pyrolysis

Low Temperature Catalytic Pyrolysis Performances of Heated Tobacco Sheets by Alkali/Alkaline Earth Metal

Production of High-Value Chemicals by Biomass Pyrolysis with Metal Oxides and Zeolites

Enhancing bio-aromatics yield in bio-oil from catalytic fast pyrolysis of bamboo residues over bi-metallic catalyst and reaction mechanism based on quantum computing

Insight into the role of varied acid-base sites on fast pyrolysis kinetics and mechanism of cellulose

Synergistic Effects of Mechanochemical Activation and Selective O-alkylation on the Chemical Structure and Gaseous Products Evolution During Coal Flash Pyrolysis